Snmp-Agent Trap Life - H3C SR6600 Command Reference Manual

Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 983555 is Up, ifAdminStatus is 1,
ifOperStatus is 1
An extended linkUp trap is in the following format:
•
#Apr 24 11:43:09:896 2008 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 983555 is Up, ifAdminStatus is 1,
ifOperStatus is 1, ifDescr is GigabitEthernet2/0/1, ifType is 6
A standard linkDown trap is in the following format:
•
#Apr 24 11:47:35:224 2008 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.3<linkDown>: Interface 983555 is Down, ifAdminStatus is 2,
ifOperStatus is 2
• An extended linkDown trap is in the following format:
#Apr 24 11:42:54:314 2008 AR29.46 IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.3<linkDown>: Interface 983555 is Down, ifAdminStatus is 2,
ifOperStatus is 2, ifDescr is GigabitEthernet2/0/1, ifType is 6
Examples
# Extend standard linkUp/linkDown traps.
<Sysname> system-view
[Sysname] snmp-agent trap if-mib link extended

snmp-agent trap life

Use snmp-agent trap life to configure the holding time of the traps in the queue.
Use undo snmp-agent trap life to restore the default holding time of traps in the queue.
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
Default
The holding time of SNMP traps in the queue is 120 seconds.
Views
System view
Default command level
3: Manage level
Parameters
seconds: Specifies the timeout time in the range of 1 to 2592000 seconds.
Usage guidelines
The SNMP module sends traps in queues. As soon as the traps are saved in the trap queue, a timer is
started. If traps are not sent out until the timer times out (in other words, the holding time configured by
using this command expires), the system removes the traps from the trap sending queue.
Examples
# Configure the holding time of traps in the queue as 60 seconds.
<Sysname> system-view
[Sysname] snmp-agent trap life 60
123