Reaction Checked-Element Rtt - H3C SR6600 Command Reference Manual

Syntax
reaction item-number checked-element probe-fail threshold-type consecutive consecutive-occurrences
action-type trigger-only
undo reaction item-number
Default
No reaction entries are configured.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view
Default command level
2: System level
Parameters
item-number: Specifies a reaction entry ID in the range of 1 to 10.
threshold-type: Specifies a threshold type.
consecutive consecutive-occurrences: Specifies the maximum number of consecutive probe failures in the
range of 1 to 16.
action-type: Specifies what action to be triggered.
trigger-only: Triggers other modules to react to certain conditions.
Usage guidelines
The collaboration function is not supported by the UDP jitter or voice operation.
Examples
# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is
triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type tcp
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
track (High Availability Command Reference)

reaction checked-element rtt

Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time. You
cannot edit a reaction entry. To change the attributes in a reaction entry, use undo reaction to delete the
entry first and then configure a new one.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences |
average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]
undo reaction item-number
53