Userlog Flow Export Host Ipv6 - H3C SR6600 Command Reference Manual

server, the IPv4 flow logging server, and the IPv6 flow logging server. If you have already specified two
servers for an interface card, you must delete one to specify a new one. If you specify a new server that
has the same IP address as but has other information different from the current server, the new
configuration overwrites the previous one.
The following matrix shows the option and router compatibility:
Option
slot slot-number
Examples
On the SR6602 router:
# Export flow logs to port 2000 on the IPv4 log server 1.2.3.6.
<Sysname> system-view
[Sysname] userlog flow export host 1.2.3.6 2000
On the SR6602-X/SR6604/SR6608/SR6616/SR6604-X/SR6608-X/SR6616-X router:
# Export flow logs generated by the card in slot 2 to port 2000 on the IPv4 log server 1.2.3.6 and port
2001 on the IPv4 log server 1.2.3.7.
<Sysname> system-view
[Sysname] userlog flow export slot 2 host 1.2.3.6 2000
[Sysname] userlog flow export slot 2 host 1.2.3.7 2001
Related commands

userlog flow export host ipv6

userlog flow export host ipv6
Use userlog flow export host to configure the IPv6 address and UDP port number of the log server.
Use the undo userlog flow export host command to remove the configuration.
Syntax
userlog flow export [ slot slot-number ] [ vpn-instance vpn-instance-name ] host ipv6 ipv6-address
udp-port
undo userlog flow export [ slot slot-number ] [ vpn-instance vpn-instance-name ] host ipv6 ipv6-address
Default
The IPv6 address and UDP port number of the log server are not configured.
Views
System view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. If the flow logging server is on the public network, do not specify this option.
ipv6-address: Specifies the IPv6 address of the flow logging server.
SR6602 SR6602-X
No Yes
SR6604/SR6608/SR6616
Yes
236
SR6604-X/SR6608-X
/SR6616-X
Yes