Usage guidelines
When IPC performance statistics is disabled, the statistics data does not change. The display ipc
performance command displays the statistics collected before IPC performance statistics was disabled.
Examples
# Enable IPC performance statistics for channel 18 on node 6.
<Sysname> ipc performance enable node 6 channel 18
reset ipc performance
Use reset ipc performance to clear IPC performance statistics.
Syntax
reset ipc performance [ node node-id | self-node ] [ channel channel-id ]
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Clears the IPC performance statistics for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
SR6602
0 to 1
self-node: Clears the IPC performance statistics for the local node.
channel channel-id: Clears the IPC performance statistics for the channel specified by the channel-id
argument.
Usage guidelines
After this command is executed, the corresponding statistics will be cleared.
Examples
# Clear the IPC performance statistics for channel 18 on node 6.
<Sysname> reset ipc performance node 6 channel 18
SR6602-X
SR6604/SR6608/SR6616
•
0 to 3 for SR6604
•
0 to 5 for SR6608
0 to 2
•
0 to 9 for SR6616
96
SR6604-X/SR6608-X/SR6
616-X
•
0 to 13 for SR6604-X
•
0 to 15 for SR6608-X
•
0 to 19 for SR6616-X