H3C SR6600 Command Reference Manual page 11
Network management and monitoring command reference
Hide thumbs
Also See for SR6600:
- Command reference manual (248 pages) ,
- Fundamentals configuration manual (184 pages) ,
- Configuration manual (145 pages)
Table of Contents
Advertisement
Reply from 1.1.2.2: bytes=56 Sequence=1 ttl=254 time=205 ms
Reply from 1.1.2.2: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 1.1.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/41/205 ms
The output shows the following:
The destination was reachable.
•
•
All ICMP echo requests sent by the source got responses.
The minimum time, average time, and maximum time for the packet's roundtrip time are 1 ms, 41
•
ms, and 205 ms, respectively.
# Test whether the device with an IP address of 1.1.2.2 in VPN 1 is reachable.
<Sysname> ping -vpn-instance vpn1 1.1.2.2
PING 1.1.2.2: 56
Reply from 1.1.2.2: bytes=56 Sequence=1 ttl=254 time=205 ms
Reply from 1.1.2.2: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 1.1.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/41/205 ms
The output shows the following:
•
The destination in VPN 1 was reachable.
All ICMP echo requests sent by the source got responses.
•
The minimum time, average time, and maximum time for the packet's roundtrip time are 1 ms, 41
•
ms, and 205 ms respectively.
# Test whether the device with an IP address of 1.1.2.2 in topology voice is reachable.
<Sysname> ping -mt voice 1.1.2.2
PING 1.1.2.2: 56
Reply from 1.1.2.2: bytes=56 Sequence=1 ttl=254 time=205 ms
Reply from 1.1.2.2: bytes=56 Sequence=2 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=3 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=4 ttl=254 time=1 ms
Reply from 1.1.2.2: bytes=56 Sequence=5 ttl=254 time=1 ms
--- 1.1.2.2 ping statistics ---
5 packet(s) transmitted
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
3
Advertisement
Table of Contents
