Userlog Flow Export Timestamps Localtime - H3C SR6600 Command Reference Manual

Use undo userlog flow export source-ip to restore the default.
Syntax
userlog flow export source-ip ip-address
undo userlog flow export source-ip
Default
The source IP address of flow logging packets is the IP address of the egress interface.
Views
System view
Default command level
2: System level
Parameters
ip-address: Specifies the source IP address of flow logging packets.
Examples
# Configure the source IP address of flow logging packets as 1.2.1.2.
<Sysname> system-view
[Sysname] userlog flow export source-ip 1.2.1.2
Related commands
userlog flow export host

userlog flow export timestamps localtime

Use userlog flow export timestamps localtime to configure the device to timestamp flow logs in the local
time.
Use undo userlog flow export timestamps localtime to restore the default.
Syntax
userlog flow export timestamps localtime
undo userlog flow export timestamps localtime
Default
Exported flow logs are time stamped in Coordinated Universal Time (UTC).
Views
System view
Default command level
2: System level
Usage guidelines
The device always timestamps the flow logs that are output to the information center in
regardless of this command.
Examples
# Configure the device to timestamp flow logs in the local time.
<Sysname> system-view
238
,
the local time