Info-Center Timestamp - H3C SR6600 Command Reference Manual

Default
The default Web output channel is channel 6.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
Examples
# Output system information to the Web interface through channel 7.
<Sysname> system-view
[Sysname] info-center syslog channel 7

info-center timestamp

Use info-center timestamp to configure the timestamp format for system information sent to all
destinations except the log host.
Use undo info-center timestamp to restore the default.
Syntax
info-center timestamp { debugging | log | trap } { boot | date | none }
undo info-center timestamp { debugging | log | trap }
Default
The timestamp format for system information is date.
Views
System view
Default command level
2: System level
Parameters
debugging: Sets the timestamp format for debug information.
log: Sets the timestamp format for log information.
trap: Sets the timestamp format for trap information.
boot: Sets the timestamp format as xxxxxx.yyyyyy, where xxxxxx is the most significant 32 bits (in
milliseconds) and yyyyyy is the least significant 32 bits. For example, 0.21990989 equals Jun 25
14:09:26:881 2007. The boot time shows the time since system startup.
date: Sets the timestamp format as "Mmm dd hh:mm:ss:sss yyyy", such as Dec 8 10:12:21:708 2007.
The date time shows the current system time.
Mmm: Abbreviations of the months in English, which could be Jan, Feb, Mar, Apr, May, Jun, Jul,
•
Aug, Sep, Oct, Nov, or Dec.
225