Views
System view
Default command level
3: Manage level
Parameters
all: Enables logging SNMP GET and SET operations.
get-operation: Enables logging SNMP GET operations.
set-operation: Enables logging SNMP SET operations.
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent for auditing NMS
behaviors. The SNMP agent sends log data to the information center. You can configure the information
center to output the data to a specific destination as needed.
Examples
# Enable logging SNMP GET operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP SET operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
snmp-agent mib-view
Use snmp-agent mib-view to create or update a MIB view.
Use undo snmp-agent mib-view to delete a MIB view.
Syntax
snmp-agent mib-view { excluded | included } view-name oid-tree [ mask mask-value ]
undo snmp-agent mib-view view-name
Default
The system creates the ViewDefault view when the SNMP agent is enabled. In the default MIB view, all
MIB objects in the iso subtree but the snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees are
accessible.
Views
System view
Default command level
3: Manage level
Parameters
excluded: Denies access to any node in the specified MIB subtree.
included: Permits access to the nodes in the specified MIB subtree.
view-name: Specifies a view name, a string of 1 to 32 characters.
115