Operation (Ftp Operation View) - H3C SR6600 Command Reference Manual

undo nqa schedule admin-name operation-tag
Views
System view
Default command level
2: System level
Parameters
admin-name: Specifies the administrator name, a case-insensitive string of 1 to 32 characters.
operation-tag: Specifies the operation tag, a case-insensitive string of 1 to 32 characters.
start-time: Specifies the start time and date of the NQA operation.
hh:mm:ss: Specifies the start time of an NQA operation.
yyyy/mm/dd: Specifies the start date of an NQA operation. The default value is the current system time,
and yyyy is in the range of 2000 to 2035.
now: Starts the operation immediately.
lifetime: Specifies the duration of the operation.
lifetime: Specifies the duration of the operation in seconds, in the range of 1 to 2147483647.
forever: Performs the operation until you stop it with the undo nqa schedule command.
Usage guidelines
You cannot enter the operation view or operation view of a scheduled NQA operation.
To view the current system time, use the display clock command.
Examples
# Configure the scheduling parameters for the operation with the administrator name admin and
operation tag test:. The start time and duration of the operation are 08:08:08 2008/08/08 and 1000
seconds respectively.
<Sysname> system-view
[Sysname] nqa schedule admin test start-time 08:08:08 2008/08/08 lifetime 1000
Related commands
display clock (Fundamentals Command Reference)

operation (FTP operation view)

Use operation to specify the operation type for the HTTP operation.
Use undo operation to restore the default.
Syntax
operation { get | put }
undo operation
Default
The operation type is get.
Views
FTP operation view
38