Sflow Agent - H3C SR6600 Command Reference Manual

10
sFlow Port Information:
Interface CID
GE4/0/1
GE4/0/2
Table 52 Command output
Field
sFlow Version
sFlow Global Information
Agent
Source Address
Collector Information
ID
IP
Port
Aging
Size
Description
sFlow Port Information
Interface
CID
Interval(s)
FID
MaxHLen
Rate
Mode
Status

sflow agent

Use sflow agent to configure an IP address for the sFlow agent.
Interval(s) FID MaxHLen
1 100 1
2 100 2
Description
sFlow has the following versions:
•
•
Global sFlow information.
IP address of the sFlow agent:
•
•
Source IP address of sFlow packets.
sFlow collector information.
sFlow collector ID.
sFlow collector IP address.
sFlow collector port.
Remaining lifetime of the sFlow collector. If the sFlow collector never ages out,
this field displays N/A.
Maximum length of the sFlow data portion in an sFlow packet.
Description of the sFlow collector.
Information about the sFlow enabled ports.
sFlow enabled interface.
ID of the target collector, for receiving the counter sampling data.
Counter sampling interval, in seconds.
ID of the target collector for receiving the flow sampling data.
Maximum copied length of a sampled packet.
Packet sampling rate.
Packet sampling mode:
•
•
Status of the sFlow-enabled port:
•
•
6343
Rate
128 1000
128 1000
4—sFlow version 4.
5—sFlow version 5.
CLI—Manually configured IP address.
Auto—Automatically configured IP address.
Determine—Samples a fixed number of packets.
Random—Samples a random number of packets.
Suspend—Port is down.
Active—Port is up.
242
0 1400
Mode Status
Random Active
Random Active