Ntp-Service Broadcast-Client; Ntp-Service Broadcast-Server - H3C SR6600 Command Reference Manual

When the NTP authentication key is configured, configure the key as a trusted key by using the
ntp-service reliable authentication-keyid command.
The system supports only the MD5 algorithm for key authentication.
A maximum of 1024 keys can be set for each device.
If an NTP authentication key is specified as a trusted key, the key automatically changes to untrusted after
you delete the key. In this case, you do not need to execute the undo ntp-service reliable
authentication-keyid command.
For security purposes, all keys, including keys configured in plain text, are saved in cipher text to the
configuration file.
Examples
# Set an MD5 authentication key, with the key ID of 10 and key value of BetterKey.
<Sysname> system-view
[Sysname] ntp-service authentication enable
[Sysname] ntp-service authentication-keyid 10 authentication-mode md5 BetterKey
Related commands
ntp-service reliable authentication-keyid

ntp-service broadcast-client

Use ntp-service broadcast-client to configure the device to operate in NTP broadcast client mode and
use the current interface to receive NTP broadcast packets.
Use undo ntp-service broadcast-client to remove the configuration.
Syntax
ntp-service broadcast-client
undo ntp-service broadcast-client
Default
The device does not operate in any NTP operation mode.
Views
Interface view
Default command level
3: Manage level
Examples
# Configure the device to operate in broadcast client mode and receive NTP broadcast messages on
GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ntp-service broadcast-client

ntp-service broadcast-server

Use ntp-service broadcast-server to configure the device to operate in NTP broadcast server mode and
use the current interface to send NTP broadcast packets.
78