Reaction Checked-Element Packet-Loss - H3C SR6600 Command Reference Manual

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element owd-ds threshold-value 50
5

reaction checked-element packet-loss

Use reaction checked-element packet-loss to configure a reaction entry for monitoring packet loss in the
NQA operation. You cannot edit a reaction entry. To change the attributes in a reaction entry, use undo
reaction to delete the entry first and then configure a new one.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element packet-loss threshold-type accumulate accumulate-occurrences
[ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring packet loss is configured.
Views
UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
item-number: Specifies a reaction entry ID in the range of 1 to 10.
threshold-type: Specifies a threshold type.
accumulate accumulate-occurrences: Specifies the maximum number of lost packets in the operation. The
value is in the range of 1 to 15000 for the UDP jitter operation and 1 to 60000 for the voice operation.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of only displaying results on the terminal display.
trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS.
Examples
# Create reaction entry 1 for monitoring packet loss in the UDP jitter operation. Before the NQA
operation starts, the initial state of the reaction entry is invalid. After the operation, lost packets are
checked. If the total number of lost packets exceeds 100 (included), the state of the reaction entry is set
to over-threshold. Otherwise, the state is set to below-threshold. Once the state of the reaction entry
changes, a trap message is generated and sent to the NMS.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element packet-loss
threshold-type accumulate 100 action-type trap-only
49