Views
SNMP operation view, UDP echo operation view, UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
port-number: Specifies the source port number of probe packets, in the range of 1 to 50000.
Examples
# Configure port 8000 as the source port of probe packets in the UDP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
statistics hold-time
Use statistics hold-time to configure the hold time of statistics groups for an NQA operation. A statistics
group is deleted when its hold time expires.
Use undo statistics hold-time to restore the default.
Syntax
statistics hold-time hold-time
undo statistics hold-time
Default
The hold time of statistics groups is 120 minutes.
Views
DLSw operation view, DNS operation view, FTP operation view, HTTP operation view, ICMP echo
operation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitter
operation view, voice operation view
Default command level
2: System level
Parameters
hold-time: Specifies the hold time of statistics groups in minutes, in the range of 1 to 1440.
Usage guidelines
This command is not available for the DHCP operation.
Examples
# Configure the hold time of statistics groups as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3
59