Data-Fill - H3C SR6600 Command Reference Manual

Syntax
codec-type { g71 1a | g71 1u | g729a }
undo codec-type
Default
The codec type for the voice operation is G.71 1 A-law.
Views
Voice operation view
Default command level
2: System level
Parameters
g71 1a: Specifies G.71 1 A-law codec type.
g71 1u: Specifies G.71 1 μ-law codec type
g729a: Specifies G.729 A-law codec type.
Examples
# Configure the codec type for the voice operation as g729a.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] codec-type g729a

data-fill

Use data-fill to configure the string to be filled in the payload of each probe packet.
Use undo data-fill to restore the default.
Syntax
data-fill string
undo data-fill
Default
The string is the hexadecimal number 00010203040506070809.
Views
ICMP echo operation view, UDP echo operation view, UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
string: Specifies a case-sensitive string of 1 to 200 characters.
Usage guidelines
If the payload length is smaller than the string length, only the first part of the string is filled. For
•
example, if you configure the string as abcd and the payload size as 3 bytes, abc is filled.
14