Reset Userlog Flow Export - H3C SR6600 Command Reference Manual

Address of log server
Total logs/UDP packets exported
Logs in buffer
Table 51 Command output
Field
flow
No userlog export is enabled
Export Version 1 logs to log server
Source address of exported logs
Address of log server
VPN-instance
Total logs/UDP packets exported
Logs in buffer
Related commands

reset userlog flow export

reset userlog flow export
Use reset userlog flow export to clear flow log statistics.
Syntax
reset userlog flow export slot slot-number
Views
User view
Default command level
2: System level
Parameters
slot slot-number: Specifies a card by its slot number.
Usage guidelines
The following matrix shows the option and router compatibility:
: 2.2.4.3 (port: 2000)
: 0/0
: 0
Description
Configuration and statistics about flow logs.
Flow logs are not sent to the log server. It may be
because exporting flow logs to the log server is not
configured, or flow logs are sent to the information
center.
Export flow log packets of version 1.0 to the log
server.
Source IP address of the flow logging packets
specified by userlog flow export source-ip. If userlog
flow export source-ip is not configured, this field does
not appear.
IP address and port number of the log server.
VPN instance to which the flow logging server
belongs.
You can specify a VPN instance only for an IPv4 log
server.
Total number of flow logs exported and total number
of the UDP packets carrying these flow logs (a UDP
packet may carry multiple flow logs).
Total number of flow logs in the cache.
233