Rmon History - H3C SR6600 Command Reference Manual

Default command level
2: System level
Parameters
entry-number: Specifies an event entry index in the range of 1 to 65535.
description string: Configures an event description, a string of 1 to 127 characters.
log: Logs the event when it occurs.
log-trap log-trapcommunity: Log and trap events. The system performs both logging and trap sending
when the event occurs. log-trapcommunity indicates the community name of the network management
station that receives trap messages, a string of 1 to 127 characters.
none: Performs no action when the event occurs.
trap trap-community: Trap event. The system sends a trap with a community name when the event occurs.
trap-community specifies the community name of the network management station that receives trap
messages, a string of 1 to 127 characters.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters that can contain
spaces.
Usage guidelines
When creating an event entry, you can define the actions that the system takes when the event is
triggered by its associated alarm in the alarm table. The system can log the event, send a trap, do both,
or do neither at all, depending on your configuration.
You cannot create an entry that has the same event description, event type (log, trap, logtrap, or none),
and community name (trap-community or log-trapcommunity) as an existing event entry in the RMON
event table.
You can create up to 60 alarm entries.
Examples
# Create event 10 in the RMON event table.
<Sysname> system-view
[Sysname] rmon event 10 log owner user1
Related commands
display rmon event
•
rmon alarm
•
• rmon prialarm

rmon history

Use rmon history to create an entry in the RMON history control table.
Use undo rmon history to remove a specified entry from the RMON history control table.
Syntax
rmon history entry-number buckets number interval sampling-interval [ owner text ]
undo rmon history entry-number
Views
Ethernet interface view
145