Terminal Trapping - H3C SR6600 Command Reference Manual

Examples
# Enable the monitoring of system information on the current terminal.
<Sysname> terminal monitor
Info: Current terminal monitor is on.

terminal trapping

Use terminal trapping to enable the display of trap information on the current terminal.
Use undo terminal trapping to disable the display of trap information on the current terminal.
Syntax
terminal trapping
undo terminal trapping
Default
The display of trap information on the current terminal is enabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
To view the trap information, execute the terminal monitor and terminal trapping commands, and then
enable the information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the display of trap information on the terminal restores the
default.
Examples
# Enable the display of trap information on the current terminal.
<Sysname> terminal trapping
Info: Current terminal trapping is on.
231