Enable - H3C SR6600 Command Reference Manual

Source AS
Destination AS
L4 source port
L4 destination port
IP protocol version
TCP flags
Protocol
Source ToS
IPv6 source mask
IPv6 destination mask
Direction
Forwarding offset
Out VPN ID
Sampling algorithm
PAD
Sampling interval
Table 42 Command output
Field
Stream template refresh-rate packet
Stream template refresh-rate time(in minute)
Active stream templates
Added stream templates
AS outbound template
AS inbound template
Packets
Last template export time
Field count

enable

Use enable to enable current IPv6 NetStream aggregation.
Use undo enable to disable current IPv6 NetStream aggregation.
Syntax
enable
undo enable
Default
No IPv6 NetStream aggregation is enabled.
Views
NetStream aggregation view
4
4
2
2
1
1
1
1
1
1
1
1
2
1
1
4
Description
Refresh frequency with which the template is sent.
Refresh interval in minutes at which the template is sent.
Number of active stream templates at present.
Number of templates that have been created after the system
starts.
Information about the AS template in the outbound direction.
Information about the AS template in the inbound direction.
Number of packets sent using the template. A packet may
contain multiple flows and different flows may use different
templates. The number of packets is in fact the number of flows.
Last time when the template was exported.
Total number of fields in a template.
192