Snmp-Agent; Snmp-Agent Calculate-Password - H3C SR6600 Command Reference Manual

snmp-agent

Use snmp-agent to enable the SNMP agent.
Use undo snmp-agent to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
The SNMP agent is disabled.
Views
System view
Default command level
3: Manage level
Usage guidelines
The snmp-agent command is optional for an SNMP configuration task. The SNMP agent is automatically
enabled when you perform any command that begins with snmp-agent except for the snmp-agent
calculate-password command.
Examples
# Enable the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent

snmp-agent calculate-password

Use snmp-agent calculate-password to convert a plaintext key to an encrypted key for authentication or
encryption in SNMPv3.
Syntax
In non-FIPS mode:
snmp-agent calculate-password plain-password mode { 3desmd5 | 3dessha | md5 | sha }
{ local-engineid | specified-engineid engineid }
In FIPS mode:
snmp-agent calculate-password plain-password mode sha { local-engineid | specified-engineid
engineid }
Views
System view
Default command level
3: Manage level
Parameters
plain-password: Specifies a plaintext authentication or privacy key.
109