Enable - H3C SR6600 Command Reference Manual

Output SNMP
Direction
Sampling algorithm
PAD
PAD
Sampling interval
Table 39 Command output
Field
Stream template refresh-rate packet
Stream template refresh-rate time(in
minute)
Active stream templates
Added stream templates
The output varies depending on the aggregation mode. The following only describes the fields of AS
aggregation mode:
AS outbound template
AS inbound template
Packets
Last template export time
Field count
Field type
Field length (byte)
Flows
Out/In packets
Out/In bytes
First switched
Last switched
Input SNMP
Output SNMP
PAD
Sampling interval

enable

Use enable to enable current NetStream aggregation.
Use undo enable to disable current NetStream aggregation.
Syntax
enable
4
1
1
1
1
4
Description
Refresh frequency with which the template is sent.
Refresh interval in minutes at which the template is sent.
Number of active NetStream templates.
Number of templates that have been created..
Information about the AS template in the outbound direction.
Information about the AS template in the inbound direction.
Number of packets sent using the template. A packet may contain
multiple flows and different flows may use different templates.
Therefore, the number of packets is in fact the number of flows.
Time when the last flow record template was exported.
Total number of fields in a template.
Type of the fields contained in the flow record template.
Length of the field in byte.
Number of aggregation flows.
Number of sent and received packets.
Size of sent and received packets in bytes.
System time when the first packet was switched in milliseconds.
System time when the last packet was switched in milliseconds.
SNMP index of the input interface.
SNMP index of the output interface.
Padding string.
Sampling rate.
170