Auto Warp System Layout; Auto Warp Application Overview - Christie H Series User Manual

Auto Warp system layout

The following diagram illustrates the system layout required to use the Auto Warp application.

Auto Warp application overview

The Auto Warp application uses a webcam to provide configuration of warping, blending, and stacking
for projectors.
Using the Auto Warp application you can control up to six units simultaneously with various layouts for
warping, blending, and stacking.
Blending
1x1
1x2
2x1
1x3
3x1
2x2
2x3
3x2
H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp
020-102080-05 Rev. 1 (01-2024)
Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Stacking
1 to 6
1 to 3
1 to 3
1 to 2
1 to 2
1
1
1
Auto Warp application installation
Maximum units
6
6
6
6
6
4
6
6
5