Projector overview
The Inspire Series is a high brightness, professional projector system designed with laser phosphor
technology and Digital Light Processing (DLP™) technology from Texas Instruments. With its
superior image quality and high brightness level, the product can be used for various large venue
application ranging from fixed installation, rental stage and LBE (Location Based Entertainment),
but not intended to use for domestic purpose.
Contact your dealer
Record the information about your projector and keep this information with your records to assist
with the servicing of your projector. If you encounter a problem with your Christie projector, contact
your dealer.
Purchase record
Dealer:
Dealer or Christie Sales/Service contact phone number:
Projector serial number:
The serial number can be found on the license label
Purchase date:
Installation date:
Ethernet settings
Default gateway:
Projector IP address:
Subnet mask:
Key features
Understand the important features of the projector.
•
WUXGA 1920 × 1200 resolution
•
High picture quality with superb brightness performance
•
Powered lens adjustment with lens memory function
•
Projection lens compatibility:
DWU760-iS/DWU860-iS/DWU960-iS/DWU960ST-iS:
Vertical
•
offset ranges with half image size: +/-110%
•
Horizontal offset ranges with half image size: +/-50%
Measurements comply with industry standards where offset is calculated as a ratio of the
number of pixels shifted up or down to half image size.
•
Full HD 3D technology with frame sequential up to 120 Hz
Inspire Series Installation and Setup Guide
020-001933-02 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
9