Adjusting The Fold Mirror - Christie Mirage 304K Installation And Setup Manual

Adjusting the fold mirror

Fold mirror adjustment must be completed by trained personnel and with the projector in single lamp
mode.
Notice. If not avoided, the following could result in property damage.
• Misalignment of the fold mirror may cause permanent damage to the product.
1. Set the projector to minimum power.
2. From the Test Pattern menu, select the Integrator Rod test pattern.
3. Open the Service door on the side of the projector.
4. Unlock the fold mirror screws to unlock the adjustment knobs.
5. To make horizontal adjustments, use the orange knob labeled Horizontal.
6. To make vertical adjustments, use the purple knob labeled Vertical.
7. To continue to refine the fold mirror adjustment, repeat the horizontal and vertical
adjustments.
Mirage 304K (Bm.1) Installation and Setup Guide
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
30