Output Terminal Function; Overview - Omron RX2 Series User Manual

8-11 Output Terminal Function

8-11-1 Overview

Output terminals 11 to 15 are used for open collector output, and Relay output terminals 16 and 17 are
used for relay output. Relay output 16 serves as a contact a relay, and Relay output 17 serves as a con-
tact c relay.
For the content of an output signal, by allocating the functions that you want to output to [CC-01] to
[CC-07], you will be able to allow the corresponding output terminal contacts to operate.
You can switch an output signal level with the Contacts a/b selection functions of [CC-11] to [CC-17].
Precautions for Correct Use
To use the contact c relay, please check the control circuit power supply and the relay output
terminals whether they are turned on or off.
 Parameter
Item
Output terminal func-
tion selection
Relay output terminal
function selection
Relay output terminal
function selection
Output terminal func-
tion selection
Relay output terminal
function selection a/b
(NO/NC) selection
Relay output terminal
function selection a/b
(NO/NC) selection
 Terminals Corresponding to Parameters
Alarm relay
output terminals
AL2 AL1
[CC-07]
High-function General-purpose Inverter RX2 Series User's Manual
Parameter Data
[CC-01] to
[CC-05]
Next item: Table
[CC-06] of output terminal
selections
[CC-07]
[CC-11] to
00
[CC-15]
[CC-16]
01
[CC-17]
Relay
output terminals
AL0 16A 16C
[CC-06]
Description
Outputs the allocated function to the corresponding
output terminal.
Operates as Contact a (NO).
Operates as Contact b (NC).
Output terminals
15 14 13 12
[CC-03]
[CC-05]
[CC-02]
[CC-04]
8 Applied Settings
11 CM2
[CC-01]
8 - 173
8