Inverter Status Monitor - Omron RX2 Series User Manual

5 Monitor

5-13 Inverter Status Monitor

Displays the current conditions of inverter.
Precautions for Correct Use
Command destinations vary according to the state of terminal functions as well as to the set-
tings. Commands not input from the currently enabled command destinations will be ignored.
 Parameter
Item
Detailed monitor for
icon 2 LIM
Detailed monitor for
icon 2 ALT
Detailed monitor for
icon 2 RETRY
Detailed monitor for
icon 2 NRDY
 Detailed Monitor for Icon 2 LIM [dC-37]
Data
The overcurrent suppression function is applied due to
01
increased current.
The overload limiting function is applied due to increased cur-
02
rent.
The overvoltage suppression function is applied due to
03
increased P-N voltage.
The torque limiting function is applied due to increased cur-
04
rent.
The frequency is within the upper/lower limit or jump frequency
05
limit.
The frequency command at below the minimum frequency has
06
been given.
00 A state other than those above.
 Detailed Monitor for Icon 2 ALT [dC-38]
Data
01 Current is increased.
02 The motor thermal load is increased.
03 The inverter thermal load is increased.
04 Motor temperature is rising.
00 A state other than those above.
5 - 22
Parameter Data
[dC-37] 00 to 06
[dC-38] 00 to 04
[dC-39] 00 to 02
[dC-40] 00 to 05
Status
Status
High-function General-purpose Inverter RX2 Series User's Manual
Description
Refer to 3-1-3 LCD Display on page 3-5.
Description
Under overcurrent suppression.
Under overload limit.
Under overvoltage suppression.
Under torque limit.
Within upper limit.
Within lower limit.
Within jump frequency limit.
Under minimum frequency limit.
A state other than those above.
Description
Overload advance notice in
effect.
Motor thermal advance notice in
effect.
Inverter thermal advance notice
in effect.
Motor heating advance notice in
effect.
A state other than those above.