Omron RX2 Series User Manual page 331

Disabled Functions
The following functions cannot be used when the synchronous motor (permanent magnet motor) con-
trol is conducted.
Even when they are enabled by parameters of setting, they are actually disabled.
In the following table, only the common settings (parameter center "-") and the first settings (parameter
center "1") are listed, but it is not possible either to use the second settings (parameter center "2") that
correspond to the first settings in the following table.
Item
Functions associated with
torque control
Over current restraining
function
Functions associated with
induction motor control
Part of gain mapping func-
tion
Part of auto-tuning
Commercial power supply
switching function
Acceleration or decelera-
tion cancellation function
Jogging operation
High-function General-purpose Inverter RX2 Series User's Manual
Parameter
[FA-15], [FA-16], [dA-15], and [dA-16]
[Ad-01] to [Ad-04], and [Ad-40] to [Ad-43], Input
terminal 067 [ATR]
[Ad-11] to [Ad-14], Input terminal 068 [TBS]
[bA110] to [bA116], and [bA210] to [bA216],
Input terminals 060 [TL], 061 [TRQ1], and 062
[TRQ2]
Output terminal 022 [TRQ]
[CE120] to [CE123], Output terminal 019 [OTQ]
[bA120] and [bA121]
[HA110]
[Hb130], [Hb131], [Hb140] to [Hb142], [Hb145],
[Hb146], [Hb150] to [Hb163], [Hb170], [Hb171],
and [Hb180]
[HC101] and [HC102]
[HC110] to [HC114], [HC120], and [HC121]
[HA126],[HA129]
[HA-01]=02
[HA-03]
Input terminal 035 [CS]
Input terminal 071 [LAC]
[AG-20], [AG-21], input terminal 029 [JG]
7 Advanced Settings
Description
Torque command monitoring
function
Torque controlling function
Torque biasing function
Torque limiting function
Over torque signal
Over current restraining function
Stabilization adjustment gain
Functions associated with V/f
control
Functions associated with auto-
matic boost
Sensorless vector control,
Zero-speed range sensorless
vector control
Constant for I control
Rotating system tuning
Online auto-tuning
Switching to commercial power
supply
Acceleration or deceleration can-
cellation function
Jogging operation function
7
7 - 23