Parameter Settings; Scroll Mode - Omron RX2 Series User Manual

3 Operation
3-2

Parameter Settings

Two procedures are provided for parameter settings:
• "scroll mode" in which you can check list of setting data of parameters
• "concurrent monitor mode" you can change parameters while watching the monitor under operation.
3-2-1

Scroll Mode

When configuring basic settings of motor, base frequency, rated voltage of motor, input and output of
terminals, as well as when configuring individual functions, change parameters in the scroll mode.
You can check list of setting data of parameters in the scroll mode, therefore, it is also useful when
checking the settings.
Press F1 (Menu) key on the screen that is displayed upon power-on (Multi-monitor in the example
below) to move to the system settings screen (M01).
STOP
Output Frequency
Output current
Input terminal monitor
Menu oFW
3 - 14
H01
M1
29.51 Hz
11.9 A
LLLLLLLLLLL
Optional
46.49Hz
device
High-function General-purpose Inverter RX2 Series User's Manual
M1
STOP
Menu

01 Scroll mode

02 R/W function
03 System settings
Menu oFW 0.00Hz
M01
Optional
device