Logical Output Signal - Omron RX2 Series User Manual

• When the analog input becomes the maximum value (Max) because of a short circuit in the input wire
Ai1/Ai2/Ai3 inputs
Max(100%)
Hysteresis width
[CE-42]/[CE-45]/
[CE-48]
Min(Ai1/Ai2:0%)
(Ai3 :-100%)
[WCAi1]/[WCAi2]/
[WCAi3]
[Ai1Dc]/[Ai2Dc]/
[Ai3Dc]
8-9-2

Logical Output Signal

You can combine the operation of the output terminal function to perform a logical operation for output
signals in the inverter to output various signals.
You can select three types of operators: AND, OR, and XOR.
Precautions for Correct Use
All output signals are subject to operation. However, you are not able to include the results of
logical operations [LOG1] to [LOG7] into the targets of arithmetic operation.
Selected signal
068: Logical output signal 1 (LOG1)
069: Logical output signal 2 (LOG2)
070: Logical output signal 3 (LOG3)
071: Logical output signal 4 (LOG4)
072: Logical output signal 5 (LOG5)
073: Logical output signal 6 (LOG6)
074: Logical output signal 7 (LOG7)
High-function General-purpose Inverter RX2 Series User's Manual
Analog input value
Arithmetic operation Arithmetic operation
target 1 selection target 2 selection
[CC-40]
[CC-43]
[CC-46]
[CC-49]
[CC-52]
[CC-55]
[CC-58]
8 Applied Settings
A short circuit
Window comparator
occurred↓
upper limit level
[CE-40]/[CE-43]/[CE-46]
Window comparator
lower limit level
[CE-41]/[CE-44]/[CE-47]
Analog operation level
in abnormal conditions
[CE-50]/[CE-52]/[CE-54]
Analog adopted value
Operator selection
[CC-41] [CC-42]
[CC-44] [CC-45]
[CC-47] [CC-48]
[CC-50] [CC-51]
[CC-53] [CC-54]
[CC-56] [CC-57]
[CC-59] [CC-60]
8
8 - 151