Concurrent Monitor Mode - Omron RX2 Series User Manual

3 Operation
3-2-2

Concurrent Monitor Mode

When configuring settings such as frequency command and acceleration/deceleration time while
watching the monitor during operation, you can change the settings on this monitor screen.
On the screen that is displayed upon power-on,
using the right and left (
to a setting screen "Concurrent monitor" (H03).
Monitor screen - Parameter selection screen
Set-up procedure
Output Frequency
FA-01
Output Frequency
FA-01
Output Frequency
AA101
First main speed command selection
07: Parameter set-up
3 - 18
) keys, navigate
Action
Press the Enter key to change the color of parameter field.
(Tips)
0.00 Hz
Using the up and down (
to change the parameter or change the monitor.
0.00 Hz
[0.00-60.00]
When the Enter key is pressed again, the left-most letter of
the parameter can be changed.
0.00 Hz
0.00 Hz
[0.00-60.00]
Using the arrow (
the parameter number that you want to change, and then
press the Enter key.
0.00 Hz
Example1) When the frequency command destination
Example2) When the frequency command value is con-
High-function General-purpose Inverter RX2 Series User's Manual
M1
STOP
Output Frequency
FA-01
Menu 0.00Hz
oFW
) keys, you can choose
[AA101] First speed command selection is
changed.
trolled in [FA-01] while the frequency command
destination is set to 07: Parameter setting.
H03
0.00 Hz
0.00 Hz
[0.00-60.00]
Optional
device
) keys to change