Class Specifications - Omron RX2 Series User Manual

1-3-2 200V Class Specifications
3G3RX2-A2 A2004 A2007 A2015 A2022 A2037 A2055 A2075 A2110 A2150 A2185 A2220 A2300 A2370 A2450 A2550
VLD
Applicable motor
LD
(4-pole) capacity (kW)
ND
VLD
Rated output
LD
current (A)
ND
VLD
Overload
LD
current rating
ND
Output Rated output voltage
VLD
200V LD
Rated
ND
capacity
VLD
(kVA)
240V LD
ND
VLD
Rated input
LD
current (A) *1
ND
Rated input AC
Input
voltage
Power supply VLD
equipment
LD
capacity (kVA)
ND
*2
VLD
Carrier frequency
LD
operating range *3
ND
Motor start torque *4
Regenerative braking
Braking
Minimum resistance
that can be
connected (Ω)
Height (mm)
Dimension Width (mm)
Depth (mm)
Protective construction
Approximate mass (kg)
*1. The rated input currents shown in the table are the values when the rated current is output. The values vary depending on impedance on the power supply
(wiring, breaker, input reactor option, etc.)
*2. The power supply equipment capacities shown in the table are the values when 220V rated current is output. The values vary depending on impedance on
the power supply (wiring, breaker, input reactor option, etc.)
*3. The setting of rated values for carrier frequencies [bb101]/[bb201] are internally limited in accordance with the description. Also, it is recommended to set
values equivalent to or above (maximum output frequency for driving ×10) Hz for the setting of carrier frequencies [bb101]/[bb201]. Also, in the case of
induction motor (IM) control, for items other than those subject to V/f control, it is recommended to set carrier frequency at 2kHz or more. In the case of
synchronous motor (SM)/permanent magnet motor (PMM) control, it is recommended to set carrier frequency at 8kHz or more.
*4. The value of the sensor-less vector control applied to the ND rating in the Standard motor. Torque characteristics may vary depending on the control
method and the motor used.
*5. Based on self declaration.
High-function General-purpose Inverter RX2 Series User's Manual
0.75 1.5 2.2 3.7 5.5
0.75 1.5 2.2 3.7 5.5
0.4 0.75 1.5 2.2 3.7
4.4 8.0 10.4 15.6 22.8
3.7 6.3 9.4 12.0 19.6
3.2 5.0 8.0 11.0 17.5
3-phase (3-wire) 200 to 240V (depending on receiving voltage)
1.5 2.8 3.6 5.4 7.9
1.3 2.2 3.3 4.2 6.8
1.1 1.7 2.8 3.8 6.1
1.8 3.3 4.3 6.5 9.5
1.5 2.6 3.9 5.0 8.1
1.3 2.1 3.3 4.6 7.3
5.2 9.5 12.4 18.6 27.1
4.4 7.5 11.2 14.3 23.3
3.8 6.0 9.5 13.1 20.8
Control power supply: Power supply single phase 200 to 240V/allowable variation range 170 to 264V,
50Hz (allowable variation range: 47.5 to 52.5Hz)/60Hz (allowable variation range: 57 to 63Hz)
Main circuit power supply: 3-phase (3-wire) 200 to 240V/allowable variation range 170 to 264V,
50Hz (allowable variation range: 47.5 to 52.5Hz)/60Hz (allowable variation range: 57 to 63Hz)
2.0 3.6 4.7 7.1 10.3
1.7 2.9 4.3 5.4 8.9
1.5 2.3 3.6 5.0 7.9
Equipped with BRD circuit (with a discharging resistor separately installed)
50 50 35 35 35
255 255 255 255 255
150 150 150 150 150
140 140 140 140 140
3 3 3 3 3
7.5 11 15 18.5 22
7.5 11 15 18.5 22
5.5 7.5 11 15 18.5
33.0 46.0 60.0 80.0 93.0
30.0 40.0 56.0 73.0 85.0
25.0 32.0 46.0 64.0 76.0
110% 60sec / 120% 3sec
120% 60sec / 150% 3sec
150% 60sec / 200% 3sec
11.4 15.9 20.8 27.7 32.2
10.4 13.9 19.4 25.3 29.4
8.7 11.1 15.9 22.2 26.3
13.7 19.1 24.9 33.3 38.7
12.5 16.6 23.3 30.3 35.3
10.4 13.3 19.1 26.6 31.6
39.3 54.8 71.4 95.2 110.7
35.7 47.6 66.7 86.9 101.2
29.8 38.1 54.8 76.2 90.5
15.0 20.9 27.2 36.3 42.2
13.6 18.1 25.4 33.1 38.6
11.3 14.5 20.9 29.0 34.5
0.5 to 10.0kHz
0.5 to 12.0kHz
0.5 to 16.0kHz
200%/0.3Hz
16 10 10 7.5 7.5
260 260 260 390 390
210 210 210 245 245
170 170 170 190 190
IP20*5 / UL open type
6 6 6 10 10
1 Overview
30 37 45 55 75
30 37 45 55 75
22 30 37 45 55
124 153 185 229 295
113 140 169 210 270
95.0 122 146 182 220
43.0 53.0 64.1 79.3 102.2
39.1 48.5 58.5 72.7 93.5
32.9 42.3 50.6 63.0 76.2
51.5 63.6 76.9 95.2 122.6
47.0 58.2 70.3 87.3 112.2
39.5 50.7 60.7 75.7 91.5
147.6 182.1 220.2 272.6 351.2
134.5 166.7 201.2 250.0 321.4
113.1 145.2 173.8 216.7 261.9
56.3 69.4 83.9 103.9 133.8
51.3 63.5 76.7 95.3 122.5
43.1 55.3 66.2 82.6 99.8
Regenerative braking unit
separately installed
5 --- --- --- ---
390 540 550 550 700
245 300 390 390 480
190 195 250 250 250
10 22 33 33 47
1 - 11
1