Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 88

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
4 Data Modules and Asynchronous Data Units
Connect Data Modules
7. When the SET CTS LEAD? prompt appears, press the ENTER/YES
button.
8. Press the NEXT/NO button until you see the CTS = correctValue ? or
CTS -> correctValue ? prompt. Then press the ENTER/YES button.
9. When the CONTINUE? prompt appears, press the ENTER/YES button.
10. When the SET DCD LEAD? prompt appears, press the ENTER/YES
button.
11. Press the NEXT/NO button until you see the DCD = correctValue ? or
DCD -> correctValue ? prompt. Then press the ENTER/YES button.
12. When the CONTINUE? prompt appears, press the ENTER/YES button.
SET CTS LEAD?
Push the button indicated by the arrow ( )
CTS -> correctValue ?
Push the button indicated by the arrow ( )
SET DCD LEAD?
Push the button indicated by the arrow ( )
DCD = correctValue ?
Push the button indicated by the arrow ( )
NEXT/NO BACK ENTER/YES
DATA
DATA NEXT/NO BACK ENTER/YES
NEXT/NO BACK ENTER/YES
DATA
DATA NEXT/NO BACK ENTER/YES
Issue 1
April 2000
66