Installing A Printer - Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
7 DEFINITY LAN Gateway System

Installing a Printer

9. If the PC does not display the login prompt, write down the state
displayed, then see the troubleshooting procedures for terminal
connections in DEFINITY Communications System Generic 3 Installation,
Administration and Maintenance of CallVisor ASAI over the DEFINITY LAN
Gateway.
Installing a Printer
The following instructions are typical for most installations. But follow the
instructions supplied with the printer.
1. Unpack and set up the printer according to the instructions supplied with
the printer.
2. Be sure that the printer has paper, the ribbon is properly installed, and the
cover is closed.
3. Connect one end of the printer cable to either the serial or parallel port on
the PC (depending on the PC and printer). Secure the connector with the
screws provided.
4. Connect the opposite end of the printer cable to the matching port (serial
or parallel) on the printer.
5. Set the options on the printer. Refer to the documentation shipped with the
printer.
Issue 1
April 2000
110