Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 207

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
18 Multimedia Communications Products: MMCX, MMCH, ESM
Multimedia Call Handling (MMCH)
Solution: Under "Aliasing," enter the data extension number. To do this:
a. Go to the ProShare directory and run the Diagnostics and Utilities
program.
b. Double click on the Hardware and ISDN Configuration utility.
c. Choose ISDN Line Configuration.
d. Set Protocol = custom and Manufacturer = AT&T (5ESS). Click on the
Accept button.
e. Set Switch = PBX, PBX Type = G3r (for DEFINITY ECS, R8r) or G3i (for
DEFINITY ECS, R8si). Click on the Accept button.
f. Set Phone Call Support = No and click on the Accept button.
g. Set #Phone Numbers = 1, #SPIDs = 0, and Phone Number to the data
endpoint extension.
h. Click on the Aliasing button.
i. In the Alias box, enter the data extension number, choose External, click
the Add button, click the OK button, and click the Accept button.
Symptom: Get a short break in audio path during first few seconds of a call. This
is most noticeable when covering to AUDIX/Voice mail.
Solution: ProShare mutes the audio path when it does a "capabilities exchange"
in H.320. This problem is being addressed in later versions of the ProShare
software. Contact your Lucent Technologies representative for more information.
Vistium Configuration
Table 29. Minimum System Requirements
Version:
Minimum Processor Speed:
Disk Space:
Memory:
ISA Expansion Slots (17-bit):
Monitor:
Operating System:
1.03.10 or higher
487/33 MHz, DX2/77
10 MB
8 MB RAM, 17 MB recommended
1 slot
VGA, SVGA
™
3.1x or Windows
Windows
Issue 1
April 2000
185
™
95