Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 106

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
5 External Modems
Setting Up the PARADYNE COMSPHERE 3910
Skipping to the result-code options
To reach the options we need to set, we have to skip over a number of other
options without making changes. Proceed as follows.
1. From the DTE Dialer Type (AT) menu heading, press F1 to select Nxt.
The AT Escape Char menu heading appears.
2. Press F1 to select Nxt.
The Escape GuardTim menu heading appears.
3. Press F1 to select Nxt.
The BreakForceEscap menu heading appears.
4. Press F1 to select Nxt.
The CommandCharEcho menu heading appears.
5. Press F1 to select Nxt.
The CarriageRtn Char menu heading appears.
6. Press F1 to select Nxt.
The Backspace Char menu heading appears.
7. Press F1 to select Nxt.
The Linefeed Char menu heading appears.
8. Press F1 to select Nxt.
The ResultCodes (Enable) menu heading appears.
Disabling result codes
We have reached the options that we need to change. Proceed as follows.
1. From the ResultCodes (Enable) menu heading, press the right-arrow
button once.
The Disable menu item appears.
2. Press F2 to select Disable.
3. Press F1 to select Nxt.
The ExtendResltCode (Enable) menu heading appears.
4. Press the right-arrow button once.
The Disable menu item appears.
5. Press F2 to select Disable.
Issue 1
April 2000
84