Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 62

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
4 Data Modules and Asynchronous Data Units
Connect Data Modules
5. For each prompt, if you want to select the interface, press the ENTER/YES
button or, if you want a different interface, press the NEXT/NO button.
After you select an interface, the data module runs a self-test and returns
to the HOME screen.
POWER
TEST
a. Enable the answer-only interface if the data module must operate
without any kind of external control:
INT=ANS ONLY?
Select an option (NEXT/NO or ENTER/YES)
b. Enable the AT-command interface if users need to control the data
module remotely, using a dial-up connection and Hayes-
compatible modem commands:
INT = AT COM?
Select an option (NEXT/NO or ENTER/YES)
c. Enable the keyboard-dial interface if users need to control the data
module interactively, from a terminal:
INT = KYBD DIAL?
Select an option (NEXT/NO or ENTER/YES)
D D D R
T S R C T
R R I D S
0 0 — 0 0
7400A Data Module
DATA
DATA
DATA
C
T T R
S D D
0 — —
DATA
April 2000
NEXT/NO BACK ENTER/YES
NEXT/NO BACK ENTER/YES
NEXT/NO BACK ENTER/YES
HOME
NEXT/NO BACK ENTER/YES
Issue 1
40