Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 104

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
5 External Modems
Setting Up the PARADYNE COMSPHERE 3910
2. Press F1 to select Nxt.
The Async DTE Rate menu heading appears.
3. Press the right-arrow button five times.
The 9600 menu item appears.
4. Press F2 to select 9600.
5. Press F1 to select Nxt.
The Asyn #Data Bits (8) menu heading appears.
6. Press F1 to select Nxt.
The Asyn Parity Bit (None) menu heading appears.
7. Press F1 to select Nxt.
The Asyn #Stop Bits (1) menu heading appears.
8. Press F1 to select Nxt.
The DTR Action menu heading appears.
Configuring the RS-232 Ready signals, DTR and DSR
Next, configure the Data Terminal Ready and Data Set Ready leads of the RS-
232 interface.
1. From the DTR Action menu heading, press the right-arrow button once.
The Stndrd_RS232 menu item appears.
2. Press F2 to select Stndrd_RS232.
3. Press F1 to select Nxt.
The DSR Control menu heading appears.
4. Press the right-arrow button once.
The Stndrd_RS232 menu item appears.
5. Press F2 to select Stndrd_RS232.
6. Press F1 to select Nxt.
The RTS Action menu heading appears.
Configuring RS-232 Send signals, RTS and CTS
Next you set the parameters that the modem uses to offer and accept data,
Request To Send (RTS) and Clear To Send (CTS).
1. From the RTS Action menu heading, press the right-arrow button once.
The Stndrd_RS232 menu item appears.
2. Press F2 to select Stndrd_RS232.
Issue 1
April 2000
82