Loudspeaker Paging, Music-On-Hold, And External Alerting Equipment; Loudspeaker Paging - Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
16

Loudspeaker Paging, Music-on-Hold, and External Alerting Equipment

Loudspeaker Paging

Loudspeaker Paging, Music-on-Hold,
and External Alerting Equipment
This chapter provides information on connecting the equipment necessary to use
the following features:
Loudspeaker paging
Music on hold
Dial dictation
Recorded announcement access
External ringing
Queue warning indicator
Loudspeaker Paging
The loudspeaker paging feature provides a connection from a TN763B/C/D
auxiliary trunk circuit pack (or equivalent) to a customer-supplied paging
amplifier. The music-on-hold feature provides a connection from a TN2183
analog line circuit pack (or equivalent) or auxiliary trunk circuit pack to a
customer-supplied music source.
Loudspeaker Paging without Paging Adapter
Figure 50
connections are used when the loudspeaker interface equipment is not located
in the equipment room. If the equipment is located in the equipment room, the
information outlet is not required. The connections shown are for one zone.
shows the connections for the loudspeaker paging feature. These
Issue 1
April 2000
16
161