Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 67

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
4 Data Modules and Asynchronous Data Units
Connect Data Modules
Configuring the ring indicator on 7400A DCE
The ring-indicator (pin 22) setting can have either of two values: CYCLE or ON
(the default).
1. Accept the default values, unless otherwise instructed. When the SET RI
LEAD? prompt appears, press the NEXT/NO button to keep the default,
ON.
Enabling remote loopback on 7400A DCE
The remote-loopback setting (pin 21) can have either of two values: ON or OFF
(the default).
1. Accept the default values, unless otherwise instructed. When the SET RL
LEAD? prompt appears, press the NEXT/NO button to keep the default,
ON.
Setting the signals-disconnect (SIGLS DISC) option on 7400A DCE
The settings can have either of two values: ON (the default) or OFF.
Accept the default values, unless otherwise instructed.
1. When the SET SIGLS DISC? prompt appears, press the NEXT/NO button
to keep the default, ON.
SET RI LEAD?
Push the button indicated by the arrow ( )
SET RL LEAD?
Push the button indicated by the arrow ( )
SET SIGLS DISC?
Push the button indicated by the arrow ( )
DATA NEXT/NO BACK ENTER/YES
NEXT/NO BACK ENTER/YES
DATA
DATA NEXT/NO BACK ENTER/YES
Issue 1
April 2000
45