Laser Product; Electromagnetic Compatibility Standards - Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116

LASER Product

EN50081
EN50082
UNI 3.1
CISPR22
Australia AS3548 (AS/NZ3548)
Australia AS3260
IEC 825
IEC 950
UL1459
UL 1950
CSA C222 Number 225
TS001
ILMI 3.1
LASER Product
The DEFINITY ECS switch may contain a Class 1 LASER device (IEC 825 1993) if
single-mode fiber optic cable is connected to a remote expansion port network
(EPN). The laser device operates within the following parameters:
Power output
-5 dBm
!
DANGER:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Contact your Lucent Technologies representative for more information.
Electromagnetic Compatibility
Standards
This product complies with and conforms to the following EMC standards (as
applicable):
Limits and Methods of Measurements of Radio Interference
Characteristics of Information Technology Equipment, EN55022
(CISPR22), 1993
EN50082-1, European Generic Immunity Standard
Wavelength Mode field diameter
1310 nm 8.8 mm
Issue 1
April 2000
xviii