Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 71

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
4 Data Modules and Asynchronous Data Units
Connect Data Modules
6. The CONTINUE? prompt appears. Press the ENTER/YES button.
7. The SET 19200 SPEED? prompt appears. Press the NEXT/NO button to
keep the default.
8. The SET AT CONTROL? prompt appears. Press the ENTER/YES button
to enable Hayes-compatible modem commands. Press the NEXT/NO
button to accept the default (OFF).
Use the AT CONTROL setting to let users control the data module
remotely, using a dial-up connection.
9. If you enabled AT commands, the AT = OFF? prompt appears. Press the
NEXT/NO button.
CONTINUE?
Push the button indicated by the arrow ( )
SET 19200 SPEED?
Push the button indicated by the arrow ( )
SET AT CONTROL?
Select an option (NEXT/NO or ENTER/YES)
AT=OFF?
Push the button indicated by the arrow ( )
NEXT/NO BACK ENTER/YES
DATA
DATA NEXT/NO BACK ENTER/YES
NEXT/NO BACK ENTER/YES
DATA
DATA NEXT/NO BACK ENTER/YES
Issue 1
April 2000
49