Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 118

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
6 Printers
Okidata Model OP16N
See Figure
interface'', for an overview of possible OP16N parallel connections.
Figure 22. Connecting the OP16N printer to a Sun CMS using the parallel interface
Connecting the OP16N via serial port
The OP16N comes with a parallel interface only. To connect it to a serial port, you
have to use a converter. Proceed as follows.
1. Attach an OKIDATA Serial Interface Converter (part number 50115001) to
the parallel port on the back of the printer.
2. Connect the printer to a serial port on the CMS.
The following connections are possible, depending on the CMS
equipment you have installed:
See
serial
22, ''Connecting the OP16N printer to a Sun CMS using the parallel
A serial port on an 8-, 16-, or 64-port NTS (Network Terminal Server)
installed on a Sun server
A serial port on an 8- or 16-port Aurora Ports Card installed on a
Sun server other than the E3000
A serial port on an Equinox Megaplex brick installed on an AT&T
Intel-based CMS platform
A serial port on an IPC-1600 fanout module installed on an AT&T
Intel-based CMS platform
Figure 23, ''Connecting the OP16N printer to a Sun CMS using the
converter'', for an overview of possible OP16N serial connections.
Issue 1
April 2000
96