Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 173

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
14 DEFINITY INADS
Administering DEFINITY ECS for INADS
NOTE:
Add 2 pauses in front of the dial string when using cut-through trunks.
Pauses are not required if using ARS.
1. Type change system-parameters maintenance and press
2. For high reliability systems, in the see interchange: field, type daily
and press
TN1648B circuit packs is down. This assures that within 24 hours the
working connection is available to report alarms.
3. Type add station number or next and press
4. In the Type: field, enter 500 (rotary analog telephone).
5. In the Port: field, enter the port number for this line.
6. For high reliability systems, repeat the above steps for the second analog
line. Administer the 2 stations as part of a TEG (terminating extension
group).
Partner Installation
The PARTNER system connects the DEFINITY ECS INADS port to an outgoing
central office (CO) line and is programmed to seize the outside line when INADS
seizes an inside PARTNER station line.
Listed below are the 2 types of PARTNER platforms:
PARTNER Atlas platforms with U.S. firmware and a wide input power
supply (WIPS) that allows a universal power supply. The Spain platform
conforms to the United States/Atlas platform
European platforms that focus on eastern Europe and the United Kingdom
The installation procedure describes the 2 types of PARTNER platforms with or
without power fail transfer.
. This is done in case 1 of the connections between the 2
Enter
a. Type add term-ext-group number or next and press
b. In the Group Extension: field, enter the TEG extension number.
c. In the Coverage Path: field, enter the coverage path number.
d. Enter the Group Member Assignment station numbers. Press
when finished.
April 2000
.
Enter
.
Enter
.
Enter
Issue 1
151
Enter