Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 108

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
5 External Modems
Setting Up the PARADYNE COMSPHERE 3910
5. Press F1 to select Nxt.
The V32bis Train (Long) menu heading appears.
6. Press F1 to select End.
The Edit StrapGroup > prompt appears.
Saving the new configuration
You must save the configuration changes you have made before you can use
them.
1. From the Edit StrapGroup > prompt, press the single up-arrow button
once.
The Choose Function, Edit, and Save menu headings appear.
2. Press F3 to select Save.
The Save EditArea to > prompt appears.
3. Press F1 to select Active(Saved).
The Command Complete message appears.
4. Press the single up-arrow button again.
The Save EditArea to > prompt appears.
5. Press the right-arrow button once to select Customer 1.
6. Press F1 to save changes to the Customer 1 storage area.
The Command Complete message appears.
7. Press the double up-arrow button once.
The Idle:9600 and Status Configure messages appear. When you power
off the modem, it should return to this state.
Checking the status of the COMSPHERE 3910
modem
To check the status of the COMSPHERE 3910 modem at any time, proceed as
follows.
1. From the topmost menu, select the Status menu item.
Issue 1
April 2000
86