Lucent Technologies DEFINITY Installation For Adjuncts And Peripherals page 204

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals 555-233-116
18 Multimedia Communications Products: MMCX, MMCH, ESM
Multimedia Call Handling (MMCH)
2. Open the PictureTel application program.
3. Two windows should appear: one local video and one remote video.
4. Go to the remote video window (the one without the local video image
inside it).
5. Click on the blue phone icon at the top left of the window.
6. A DIAL PAD window opens. Use the keyboard, or mouse and dial pad, to
enter the DATA extension of another multimedia endpoint. If you are
dialing another PictureTel, you can place a 1B (one 74 Kb channel) call by
only filling in the first telephone extension box on the DIAL PAD window.
To make a 2B (two 74 Kb channels) call, you must put the same called
party extension in the second telephone extension box on the DIAL PAD
window.
7. To initiate a call, click on the VIDEO CALL button on the top right of the
DIAL PAD window.
8. The dial pad disappears and you see a status window that shows
"ringing."
9. When the connection is made, the status window disappears and you can
see the connection status on the bottom bar of the remote video window.
Troubleshooting the PictureTel
Symptom: A conference call between a PictureTel and a ProShare has problems
with the video connection or with video switching.
Solution: Be sure the PictureTel is version 1.7 or higher and the ProShare is
version 2.0 or higher.
conflict with the interrupt (IRQ) port setting. Check the PictureTel
configuration to make sure that the IRQ port is set to 11. If
initialization is still a problem, contact a PictureTel representative.
Issue 1
April 2000
182