section
N 4.3
Refitting the intake manifolds
Apply the recommended threadlocker to the studs (12) and (13), install them in the cylinder heads and tighten them to the
specified torque (Sect. C 3, Engine torque settings).
Locate the intake manifolds (17) and secure with the nuts (14).
Tighten the nuts (14) to the specified torque (Sect. C 3, Engine torque settings).
Operation
Refit the throttle body
Monster 696/696+ - M.Y. 2009 - edition 00
Engine
13
2
LOCK
12
14
17
Section reference
L 6, Refitting the throttle body
2
LOCK
A
B
C
D
E
F
G
H
L
M
N
P
39