Page 1 Pacifica Hybrid 2 0 1 8 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name features and equipment that are either standard or op- FCA US LLC shall be deemed to be deleted and the name tional on this vehicle.
Page 3 TABLE OF CONTENTS SECTION PAGE INTRODUCTION ..............3 GRAPHICAL TABLE OF CONTENTS .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 WARNINGS AND CAUTIONS ....6 HOW TO USE THIS MANUAL .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION versions are not expressly indicated in the text. Therefore, you should only consider the information which is related Dear Customer, to the trim level, engine, and version that you have Congratulations on selecting your new vehicle. Be assured purchased.
Page 7: Symbols
INTRODUCTION Since the specification of your vehicle depends on the items Symbols of equipment ordered, certain descriptions and illustra- Consult the following table for a description of the symbols tions may differ from your vehicle’s equipment. that may be used on your vehicle or throughout this The detailed index at the back of this Owner’s Manual Owner’s Manual: contains a complete listing of all subjects.
Page 8: Warnings And Cautions
6 INTRODUCTION WARNINGS AND CAUTIONS VEHICLE MODIFICATIONS/ALTERATIONS This Owner’s Manual contains WARNINGS against oper- WARNING! ating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against Any modifications or alterations to this vehicle could procedures that could result in damage to your vehicle.
Page 9 GRAPHICAL TABLE OF CONTENTS CONTENTS FRONT VIEW ......8 INSTRUMENT PANEL .....10 REAR VIEW .
Page 10: Front View
8 GRAPHICAL TABLE OF CONTENTS FRONT VIEW Front View 1 — Hood/Engine Compartment 5 — Charging Port Door 2 — Headlights 6 — Exterior Mirrors 3 — Wheels/Tires 7 — Doors 4 — Windshield 8 — Fuel Door...
Page 11: Rear View
GRAPHICAL TABLE OF CONTENTS 9 REAR VIEW Rear View 1 — Tail Lamps 2 — Rear Windshield Wiper 3 — Liftgate...
Page 12: Instrument Panel
10 GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL Instrument Panel 1 — Air Vents 5 — Charge Indicator 9 — Headlight Switch 2 — Multifunction Lever 6 — Glove Compartment/Storage 3 — Instrument Cluster 7 — Push Button Ignition 4 — Windshield Wiper Lever 8 —...
Page 13: Interior
GRAPHICAL TABLE OF CONTENTS 11 INTERIOR Interior Features 1 — Power Window/Door Lock Switches 5 — Door Handle 2 — Electronic Gear Selector 6 — Climate Control 3 — Uconnect Radio 7 — Center Console 4 — Switch Panel 8 — Seats...
Page 15 GETTING TO KNOW YOUR VEHICLE CONTENTS ▫ To Enter Remote Start Mode ....50 HIGH VOLTAGE BATTERY....18 ▫...
Page 16 14 GETTING TO KNOW YOUR VEHICLE ▫ To Arm The System .....54 ▫ Ventilated Seats — If Equipped ....76 ▫...
Page 17 GETTING TO KNOW YOUR VEHICLE 15 ▫ Driver’s Outside Automatic Dimming Mirror — If ▫ Headlight Delay — If Equipped ... . .98 Equipped ......92 ▫...
Page 18 16 GETTING TO KNOW YOUR VEHICLE WINDOWS ......122 LIFTGATE ......130 ▫...
Page 19 GETTING TO KNOW YOUR VEHICLE 17 ▫ Smoker’s Package Kit — If Equipped ..151 INTERNAL EQUIPMENT ....143 ▫...
Page 20: High Voltage Battery
18 GETTING TO KNOW YOUR VEHICLE HIGH VOLTAGE BATTERY High Voltage Battery Service Disconnect Your vehicle is equipped with a Lithium-ion high voltage The High Voltage Battery Service Disconnect is located battery that is used to power the electric powertrain under the access panel, in front of the second row passen- systems and the 12 volt vehicle electrical system.
Page 21 GETTING TO KNOW YOUR VEHICLE 19 General Information conditions including extreme temperatures, the message “Battery Conditioning Leave Ignition In Run” will be The vehicle is also equipped with a Battery Management displayed in the instrument cluster display. Keep the System that is designed to: ignition in the ON/RUN position for the battery to •...
Page 22: High Voltage Charging Operation
20 GETTING TO KNOW YOUR VEHICLE • Under cold or hot temperatures, while the vehicle is HIGH VOLTAGE CHARGING OPERATION plugged-in and the ignition is in the OFF position, the SAE J1772 Charging Inlet vehicle may wake-up to pre-condition the high voltage Your vehicle uses an industry standard SAE J1772 charge battery for usage.
Page 23 GETTING TO KNOW YOUR VEHICLE 21 requires a conventional NEMA 5-15 120 Volt AC grounded To access the portable charging cord set, open the door of wall receptacle along with the portable charging cord set the cargo area storage bin, on the driver’s side, and remove provided with the vehicle.
Page 24 22 GETTING TO KNOW YOUR VEHICLE • A NEMA 6 rated enclosure with a charge current inter- WARNING! rupt device (CCID) with status indicator display • Read all the instructions before using this product. • An AC Power Cord with NEMA 5–15p, Right Angle •...
Page 25 GETTING TO KNOW YOUR VEHICLE 23 Charging Cordset Operation WARNING! 1. Plug the AC plug of the charging cordset into a 15 A, or Improper connection of the equipment-grounding con- 20 A, 120 VAC, 60 Hz, grounded wall receptacle. Do not ductor could result in a risk of electric shock.
Page 26 24 GETTING TO KNOW YOUR VEHICLE Cordset Indicator Lights Inserting The Charge Connector Into The Vehicle Charge Inlet 1 — AC Power Indicator Light 3 — Charge Active Indicator 4. When the vehicle commences charging, the Charge 2 — Fault Indicator Light Lights Active Indicator Lights will cycle from left to right, and then both turn off.
Page 27 GETTING TO KNOW YOUR VEHICLE 25 NOTE: The vehicle should start charging automatically. If wall receptacle. To disengage the vehicle coupler, press not, please check the following: the button on the charge connector first and then remove the connector from the vehicle charge inlet. •...
Page 28 26 GETTING TO KNOW YOUR VEHICLE Troubleshooting Using The Status Indicator Display Cordset does not attempt to provide charge to the vehicle, the charge connector will need to be removed from the If the vehicle is not charging properly, consult the status vehicle to clear the fault.
Page 29 GETTING TO KNOW YOUR VEHICLE 27 Portable EVSE Cordset Fault Code List Flashing Flashing Fault Fault Indication Recommended Actions Indicator Code 1, 2, 2, 2 AC Power Vehicle Current Draw Check Portable EVSE Cordset and Vehicle at a service location. is Too High 1, 1, 2, 1 AC Power...
Page 30 28 GETTING TO KNOW YOUR VEHICLE Portable EVSE Cordset Fault Code List Flashing Flashing Fault Fault Indication Recommended Actions Indicator Code 1, 1, 1, 2 Fault Portable EVSE Cordset Unplug the Portable EVSE Cordset from the vehicle charge inlet Internal Fault and retry to charge.
Page 31 GETTING TO KNOW YOUR VEHICLE 29 Portable EVSE Cordset Fault Code List Flashing Flashing Fault Fault Indication Recommended Actions Indicator Code 1, 1, 2, 1 Fault & AC EVSE Enclosure Inter- Use caution as the Portable EVSE Cordset housing may be hot. Power nal Temperature is Too It is recommended to move the Portable EVSE Cordset out of...
Page 32: Ac Level 2 Charging (240V, 30 Amp)
30 GETTING TO KNOW YOUR VEHICLE • Do not place fingers, or any other objects inside the FCC Notice: charge connector. This device complies with Part 15 of the FCC Rules and • Do not allow children to operate this device. Adult with Industry Canada license-exempt RSS standard(s).
Page 33: Charging Times
GETTING TO KNOW YOUR VEHICLE 31 • Press the button on the charge connector first and then PARK before the charge connector is plugged into the vehicle’s charge inlet. You will hear a “click” when the remove the connector from the vehicle charge inlet charge connector is inserted correctly and is coupled with •...
Page 34: Vehicle Charge Indicators
32 GETTING TO KNOW YOUR VEHICLE • Charging times may be longer if a thermal self- protection reduces the charging current from the EVSE. • If the vehicle’s ignition is in either the ACC or RUN position, the vehicle charge indicator may not indicate greater than a 99% state of charge, and will continue to charge the vehicle, due to the vehicle loads.
Page 35 GETTING TO KNOW YOUR VEHICLE 33 Number Of Indicator Percent Of Battery Charge Lights Illuminated 1st light blinks 0 – 20% 1st light ON, second light 21 – 40% blinks 1st and 2nd lights ON, 41 – 60% 3rd light blinks 1st, 2nd, and 3rd light 61 –...
Page 36: Hybrid Electric Pages
34 GETTING TO KNOW YOUR VEHICLE Hybrid Electric Pages Power Flow Within your Uconnect 4C/4C NAV radio is the “Hybrid The first screen within the “Hybrid Electric Pages” App is Electric Pages” App that allows you to see your vehicle’s the Power Flow screen.
Page 37 GETTING TO KNOW YOUR VEHICLE 35 On the bar graph, miles (km) driven on the same day in Electric mode (battery only) are always shown below miles (km) driven in Hybrid mode. When one day of the week exceeds 100 miles (160 km) driven, the values of miles (km) driven in Electric and Hybrid modes will be listed above the bar graph in respective colors (teal for Electric and blue for Hybrid).
Page 38 36 GETTING TO KNOW YOUR VEHICLE Charging Schedule The third screen within the “Hybrid Electric Pages” App is the Charging Schedule screen. From this screen you can set when you want you vehicle to charge. To do so, press the check box next to the setting “Enable Schedule”...
Page 39: Keys
GETTING TO KNOW YOUR VEHICLE 37 If the vehicle is turned off outside of the charging window, (RKE) and a START/STOP push button ignition system. a radio pop-up message will be displayed, which provides The Remote Keyless Entry system consists of a key fob and an option to begin charging the vehicle immediately.
Page 40 38 GETTING TO KNOW YOUR VEHICLE Three Button Key Fob Four Button Key Fob...
Page 41 GETTING TO KNOW YOUR VEHICLE 39 Five Button Key Fob Six Button Key Fob...
Page 42 40 GETTING TO KNOW YOUR VEHICLE hazard lights will flash to acknowledge the unlock signal. The illuminated entry system will be activated. Seven Button Key Fob To Unlock The Doors First Push Unlock NOTE: Uconnect Settings lets you program the system to 2nd Push Of Key Fob Unlocks unlock either the driver’s side doors on the first push (default) or unlock all doors on the first push of the unlock...
Page 43 GETTING TO KNOW YOUR VEHICLE 41 Second Push Unlock Mechanical Latch To Release Emergency Key This feature lets you program the system to unlock either The emergency key allows for entry into the vehicle should the driver’s side doors or all doors on the first push of the the battery in the vehicle or the key fob go dead.
Page 44 42 GETTING TO KNOW YOUR VEHICLE To Lock The Doors And Liftgate Key Fob Battery Replacement Push and release the lock button on the key fob to lock all The recommended replacement battery is one CR2032 doors and liftgate. The hazard lights will flash once and the battery.
Page 45 GETTING TO KNOW YOUR VEHICLE 43 Emergency Key Removal Separating The Key Fob Case 2. Insert a coin, a flat blade screw driver, or the tip of your 3. Remove the battery by sliding the battery rearward in its emergency key into the now exposed slot and carefully pocket until the battery lifts up.
Page 46 44 GETTING TO KNOW YOUR VEHICLE Programming Additional Key Fob KeySense Features — If Equipped If you do not have a programmed key fob, contact your This feature provides the vehicle owner with the ability to authorized dealer for details. customize vehicle settings that can be applied to determine the driving experience for other drivers of the vehicle.
Page 47 GETTING TO KNOW YOUR VEHICLE 45 The following features are always enabled when this key is in use: • Entertainment Audio Muted if 1st row occupied Seat Belts are not Fastened • Consistent Seat Belt Unfastened Chime • Maximum Radio Volume limited to 15 out of 39 •...
Page 48: Ignition Switch
46 GETTING TO KNOW YOUR VEHICLE NOTE: Changes or modifications not expressly approved The Keyless Push Button Ignition has four operating by the party responsible for compliance could void the positions; three of which are labeled and will illuminate user’s authority to operate the equipment. when in position.
Page 49 GETTING TO KNOW YOUR VEHICLE 47 ON/RUN • Driving position. • All the electrical devices are available. START • As long as the Ready appears in the instrument cluster display it does not matter if the engine is running or not, vehicle propulsion is available.
Page 50 48 GETTING TO KNOW YOUR VEHICLE In case the ignition switch does not change with the push of WARNING! (Continued) a button, the key fob may have a low or dead battery. In this • Never leave children alone in a vehicle, or with situation, a back up method can be used to operate the access to an unlocked vehicle.
Page 51: Remote Starting System - If Equipped
GETTING TO KNOW YOUR VEHICLE 49 NOTE: If the brake is pressed and the ignition is placed in 80° F (26.7° C), the optional heated seats, optional heated the RUN position with an EVSE connected to the vehicle, steering wheel, optional heated mirrors and rear defroster the instrument cluster will not display the Ready state.
Page 52: How To Use Remote Start
50 GETTING TO KNOW YOUR VEHICLE The message will stay active until the ignition is placed in WARNING! the ON/RUN position. • Do not start or run an engine in a closed garage or How To Use Remote Start confined area. Exhaust gas contains Carbon Monox- All of the following conditions must be met before the ide (CO) which is odorless and colorless.
Page 53: To Exit Remote Start Mode Without Driving The Vehicle
GETTING TO KNOW YOUR VEHICLE 51 • The park lamps will turn on and remain on during NOTE: For vehicles equipped with the Keyless Enter- Remote Start mode. N-Go — Passive Entry feature, the message “Remote Start Active — Push Start Button” will display in the instrument •...
Page 54: General Information
52 GETTING TO KNOW YOUR VEHICLE General Information the vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid The following regulatory statement applies to all Radio key fob is used to start the engine.
Page 55: Customer Key Programming
GETTING TO KNOW YOUR VEHICLE 53 All of the key fobs provided with your new vehicle have When having the Sentry Key Immobilizer System serviced, been programmed to the vehicle electronics. bring all vehicle keys with you to an authorized dealer. Customer Key Programming General Information Programming key fobs may be performed at your autho-...
Page 56: Vehicle Security Alarm - If Equipped
54 GETTING TO KNOW YOUR VEHICLE • For vehicles equipped with Keyless Enter-N-Go — VEHICLE SECURITY ALARM — IF EQUIPPED Passive Entry, make sure the vehicle ignition system is The vehicle security alarm monitors the vehicle doors for OFF. unauthorized entry and the ignition switch for unauthor- ized operation.
Page 57: Doors
GETTING TO KNOW YOUR VEHICLE 55 • Hands Free Liftgate passive entry activation (if security alarm will arm regardless of whether you are in equipped with Hands Free Liftgate passive entry). the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound.
Page 58 56 GETTING TO KNOW YOUR VEHICLE Manual Front Door Lock Location Manual Door Lock Rocker Switch 1 — Manual Door Lock 2 — Door Handle...
Page 59 GETTING TO KNOW YOUR VEHICLE 57 WARNING! • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • Never use the PARK position as a substitute for the parking brake.
Page 60: Central Lock/Unlock - If Equipped
58 GETTING TO KNOW YOUR VEHICLE Central Lock/Unlock — If Equipped allow the locks to operate. A chime will sound if the ignition is in the ACC or ON/RUN position and a door is A power door lock switch is on each front door trim panel. open, as a reminder to place the ignition in the OFF Use this switch to lock or unlock the doors.
Page 61 GETTING TO KNOW YOUR VEHICLE 59 NOTE: (low beams, license plate lamp, position lamps) for the time 0, 30(default), 60 or 90 seconds. Passive Entry also • Passive Entry may be programmed ON/OFF. Refer to initiates two flashes of the turn lamps. “Uconnect Settings”...
Page 62 60 GETTING TO KNOW YOUR VEHICLE NOTE: If “Unlock All Doors 1st Press” is programmed, all FOBIK-Safe only executes in vehicles with Passive Entry. doors and liftgate will unlock when you grab hold of the There are three situations that trigger a FOBIK-Safe search driver’s front door handle.
Page 63 GETTING TO KNOW YOUR VEHICLE 61 • Three attempts are made to lock the doors using the door panel switch and then close the doors. NOTE: On the third attempt ALL doors will lock and the key fob can be locked in the vehicle. To Enter The Liftgate With a valid key fob within 5 ft (1.5 m) of the liftgate, cycle the handle to open the liftgate and pull the liftgate open...
Page 64: Manual Sliding Side Door
62 GETTING TO KNOW YOUR VEHICLE Manual Sliding Side Door The sliding door may be opened from the inside or the outside. Pull outward on the exterior handle to open the sliding door. The sliding door inside handle functions by rocking forward and back.
Page 65: Power Sliding Side Door - If Equipped
GETTING TO KNOW YOUR VEHICLE 63 • There is a hold-open latch that is activated when the sliding door is fully opened. This latch will keep your sliding door open on any incline. To close the sliding door after the hold-open latch is activated, you must rock the inside handle forward or pull outward on the exterior handle.
Page 66 64 GETTING TO KNOW YOUR VEHICLE Push the button on the key fob twice within five There are power sliding side door switches located on the seconds to open, close, or reverse a power sliding B-Pillar trim panel, just in front of the power sliding door door.
Page 67 GETTING TO KNOW YOUR VEHICLE 65 Driver Side Power Sliding Side Door Switch Passenger Side Power Sliding Side Door Switch NOTE: • If anything obstructs the power sliding side door while it is closing or opening, the door will automatically reverse to the closed or open position, provided it meets sufficient resistance.
Page 68: Hands-Free Sliding Doors - If Equipped
66 GETTING TO KNOW YOUR VEHICLE Hands-Free Sliding Doors — If Equipped WARNING! Personal injury or cargo damage may occur if caught in the path of the sliding door. Make sure the door path is clear before closing the door. WARNING! Before driving off, check the instrument cluster for a sliding door or door open message or warning indica-...
Page 69: Child Locks
GETTING TO KNOW YOUR VEHICLE 67 NOTE: To Engage The Child Protection Door Lock • To open the Hands-Free Sliding Doors requires a valid 1. Open the sliding side door. Passive Entry key fob within 5 ft (1.5 m) of the door 2.
Page 70: Seats
68 GETTING TO KNOW YOUR VEHICLE NOTE: To Disengage The Child Protection Door Lock • After engaging (or disengaging) the Child Protection 1. Open the sliding side door. Door Lock, always test the inside door handle with the 2. Slide the Child Protection Door Lock control outward sliding door closed to make certain the Child Protection (away from the vehicle) to disengage the Child Protec- Door Lock is in the desired position.
Page 71: Manual Adjustment (Front Seats) - If Equipped
GETTING TO KNOW YOUR VEHICLE 69 Manual Front Adjuster WARNING! (Continued) Both front seats are adjustable forward or rearward. The these areas are more likely to be seriously injured or manual seat adjustment handle is located under the seat killed. cushion at the front edge of each seat.
Page 72 70 GETTING TO KNOW YOUR VEHICLE While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Page 73: Manual Adjustment (Rear Seats)
GETTING TO KNOW YOUR VEHICLE 71 Manual Adjustment (Rear Seats) WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured.
Page 74 72 GETTING TO KNOW YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 75: Power Adjustment (Front Seats) - If Equipped
GETTING TO KNOW YOUR VEHICLE 73 Power Adjustment (Front Seats) — If Equipped WARNING! Some models may be equipped with eight-way power • Adjusting a seat while driving may be dangerous. seats for the driver and front passenger. The power seat Moving a seat while driving could result in loss of switches are located on the outboard side of the seat.
Page 76 74 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Forward Or Rearward WARNING! The seat can be adjusted both forward and rearward. Push • Adjusting a seat while driving may be dangerous. the seat switch forward or rearward, and the seat will Moving a seat while driving could result in loss of move in the direction of the switch.
Page 77: Heated Seats
GETTING TO KNOW YOUR VEHICLE 75 Push the switch forward or rearward to increase or de- If the HI-level setting is selected, the system will automati- crease the lumbar support. Push the switch upward or cally switch to LO-level after approximately 60 minutes of downward to raise or lower the lumbar support.
Page 78: Ventilated Seats - If Equipped
76 GETTING TO KNOW YOUR VEHICLE The front ventilated seats control buttons are located WARNING! within the climate or controls screen of the touchscreen. • Persons who are unable to feel pain to the skin • Press the ventilated seat button once to choose HI.
Page 79: Easy Entry Slide Second Row Seating
GETTING TO KNOW YOUR VEHICLE 77 Easy Entry Slide Second Row Seating 2. Slide lever upwards to unlock the seatback. The second row seats can be tilted and slid forward for easy entry into the third row. 1. Located in the seatback of the second row seat is a lever that provides easier access to the third row by tilting the seat forward.
Page 80: Fold-Flat
78 GETTING TO KNOW YOUR VEHICLE 3. Push on seatback to slide seat forward to access the third Fold-Flat row. To fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion.
Page 81 GETTING TO KNOW YOUR VEHICLE 79 Removing Seat 3. The release strap is located on the front of the seat, near the floor. 1. Adjust seat to the full rearward position. 2. Lift the recline lever to fold the seatback flat against the seat cushion.
Page 82 80 GETTING TO KNOW YOUR VEHICLE 5. Tilt the back of the seat to the upward position. 6. The seat assembly can now be removed from the vehicle. Grab the front seatback edge located near the head restraint and the grab bar on the rear side of the seat cushion for easy removal.
Page 83: Manually Folding Third Row Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE 81 Reinstalling Seat WARNING! 1. To reinstall the seat, align the seats front attachments If not properly latched, the seat could become loose. into the detent positions on the floor. Personal injuries could result. Manually Folding Third Row Seats — If Equipped 1.
Page 84 82 GETTING TO KNOW YOUR VEHICLE 3. Pull release strap marked “2” and tumble the seat rearward into the storage bin. Stowed Third Row Seat To Unfold Third Row Seats Strap “2” 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
Page 85 GETTING TO KNOW YOUR VEHICLE 83 Assist Straps Strap “2” 2. Pulling strap “2” releases the seatback to return to its 3. Raise the head restraint to its upright position. full upright position. WARNING! • In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments.
Page 86: Head Restraints
84 GETTING TO KNOW YOUR VEHICLE HEAD RESTRAINTS Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear.
Page 87 GETTING TO KNOW YOUR VEHICLE 85 rearward, pull forward on the head restraint to furthest forward position and head restraint will reset to furthest rearward position. Forward Adjustment Normal Position...
Page 88: Head Restraints - Second Row
86 GETTING TO KNOW YOUR VEHICLE WARNING! • A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- moved head restraints in a location outside the occupant compartment.
Page 89 GETTING TO KNOW YOUR VEHICLE 87 WARNING! • A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- moved head restraints in a location outside the occupant compartment.
Page 90: Head Restraints - Third Row
88 GETTING TO KNOW YOUR VEHICLE Head Restraints — Third Row The head restraint in the center position can be raised and lowered for tether routing or height adjustment. Refer to The outboard head restraints can be manually folded “Occupant Restraint Systems” in “Safety” for further infor- forward for improved rearward visibility.
Page 91: Steering Wheel
GETTING TO KNOW YOUR VEHICLE 89 STEERING WHEEL steering column in position, push the lever upward until fully engaged. Tilt/Telescoping Steering Column This feature allows you to tilt the steering column upward WARNING! or downward. It also allows you to lengthen or shorten the Do not adjust the steering column while driving.
Page 92: Mirrors
90 GETTING TO KNOW YOUR VEHICLE • Press the heated steering wheel button once to turn WARNING! (Continued) the heating element on. • Do not place anything on the steering wheel that • Press the heated steering wheel button a second time insulates against heat, such as a blanket or steering to turn the heating element off.
Page 93: Automatic Dimming Mirror - If Equipped
GETTING TO KNOW YOUR VEHICLE 91 Manual Rearview Mirror Automatic Dimming Mirror Automatic Dimming Mirror — If Equipped CAUTION! This mirror automatically adjusts for headlight glare from To avoid damage to the mirror during cleaning, never vehicles behind you. You can turn the feature on or off by spray any cleaning solution directly onto the mirror.
Page 94: Outside Mirrors
92 GETTING TO KNOW YOUR VEHICLE Outside Mirrors Conversation Mirror To receive maximum benefit, adjust the outside mirror(s) to Located in the overhead console there is a conversation center on the adjacent lane of traffic with a slight overlap of mirror to view all the passengers in the vehicle.
Page 95: Power Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE 93 Power Mirrors — If Equipped NOTE: A light in the selected button will illuminate indicating the mirror is activated and can be adjusted. The power mirror controls are located on the driver-side door trim panel. Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move.
Page 96: Power Folding Mirrors - If Equipped
94 GETTING TO KNOW YOUR VEHICLE Power Folding Mirrors — If Equipped NOTE: If the vehicle speed is greater than 10 mph (16 km/h), the folding feature will be disabled. The switch for the power folding mirrors is located be- tween the power mirror switches L (left) and R (right).
Page 97: Illuminated Vanity Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE 95 Illuminated Vanity Mirrors — If Equipped EXTERIOR LIGHTS An illuminated vanity mirror is located on the sun visor. To Multifunction Lever use the mirror, rotate the sun visor down and swing the The multifunction lever is located on the left side of the mirror cover upward.
Page 98: Headlight Switch
96 GETTING TO KNOW YOUR VEHICLE Headlight Switch Rotate the headlight switch to the third detent for head- light, parking light and instrument panel operation. The headlight switch is located on the left side of the instrument panel. The switch controls the operation of the Daytime Running Lights —...
Page 99: Flash-To-Pass
GETTING TO KNOW YOUR VEHICLE 97 NOTE: Broken, muddy, or obstructed headlights and tail- 1. Select “Automatic High Beams — OFF” through the lights of vehicles in the field of view will cause headlights Uconnect System. Refer to “Uconnect Settings” in “Mul- to remain on longer (closer to the vehicle).
Page 100: Headlights On With Wipers - If Equipped
98 GETTING TO KNOW YOUR VEHICLE for up to 90 seconds after you turn the ignition switch OFF. When exiting the vehicle the driver can choose to have the To turn the Automatic System off, turn the headlight switch headlights remain on for 30, 60, or 90 seconds or not remain counterclockwise to the O (off) position.
Page 101: Turn Signals
GETTING TO KNOW YOUR VEHICLE 99 Turn Signal Warning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about 1 mile (1.6 km) with the turn signals on, a chime will sound and a message will display in the cluster to alert the driver.
Page 102: Interior Lights
100 GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS NOTE: • Before exiting the vehicle, make sure that the interior Courtesy/Interior Lighting lights are turned off. This will prevent the battery from The courtesy light switches are used to turn the courtesy discharging once the doors are closed.
Page 103 GETTING TO KNOW YOUR VEHICLE 101 The courtesy lights also function as reading lights. Push the lens to turn these lights on while inside the vehicle. Push the lens a second time to turn each light off. Ambient Light/Door Handle Light Dimmer Interior Lighting Off Rotate the right (instrument panel) dimmer control to the Reading Lights...
Page 104: Windshield Wiper And Washers
102 GETTING TO KNOW YOUR VEHICLE increase or decrease the brightness of the instrument panel. WINDSHIELD WIPER AND WASHERS At the top detent of the instrument panel dimmer, all the Windshield Wiper Operation interior lights will also illuminate. At the bottom most The wipers and washers are operated by a switch within setting (extreme bottom) interior lights are turned off the wiper lever.
Page 105 GETTING TO KNOW YOUR VEHICLE 103 NOTE: Always remove any buildup of snow that prevents Windshield Washers the windshield wiper blades from returning to the off To use the washer, pull the lever rearward toward you and position. If the windshield wiper switch is turned off and hold while spray is desired.
Page 106: Rain Sensing Wipers - If Equipped
104 GETTING TO KNOW YOUR VEHICLE • The Rain Sensing feature can be turned on and off Rain Sensing Wipers — If Equipped through the Uconnect System. Refer to “Uconnect Set- This feature senses rain or snowfall on the windshield and tings”...
Page 107: Rear Wiper And Washer
GETTING TO KNOW YOUR VEHICLE 105 • Remote Start Mode Inhibit — On vehicles equipped intermittent setting, the wipers will turn on and operate for with Remote Starting system, Rain Sensing wipers are several wipe cycles after the lever is released, and then not operational when the vehicle is in the remote start resume the intermittent interval previously selected.
Page 108 106 GETTING TO KNOW YOUR VEHICLE Uconnect 4C/4C NAV Temperature Controls...
Page 109 GETTING TO KNOW YOUR VEHICLE 107 Control Descriptions Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off.
Page 110 108 GETTING TO KNOW YOUR VEHICLE Icon Description Front Defrost Button Press and release to change the current airflow setting to Defrost mode. The indicator illumi- nates when this feature is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase.
Page 111 GETTING TO KNOW YOUR VEHICLE 109 Icon Description SYNC Button Press the SYNC button on the touchscreen to toggle the Sync feature on/off. The SYNC indica- tor is illuminated when this feature is enabled. SYNC is used to synchronize the passenger tem- perature setting with the driver temperature setting.
Page 112 110 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.
Page 113 GETTING TO KNOW YOUR VEHICLE 111 Icon Description Climate Control OFF Button Press and release this button to turn the Climate Controls off. Climate Control Functions CAUTION! A/C (Air Conditioning) Failure to follow these cautions can cause damage to The Air Conditioning (A/C) button allows the operator to the heating elements: •...
Page 114 112 GETTING TO KNOW YOUR VEHICLE NOTE: Recirculation • If fog or mist appears on the windshield or side glass, When outside air contains smoke, odors, or high humidity, select Defrost mode, and increase blower speed if or if rapid cooling is desired, you may wish to recirculate needed.
Page 115: Automatic Temperature Control (Atc) - If Equipped
GETTING TO KNOW YOUR VEHICLE 113 Automatic Temperature Control (ATC) — If NOTE: It is not necessary to move the temperature set- tings. The system automatically adjusts the temperature, Equipped mode and fan speed to provide comfort as quickly as Automatic Temperature Control (ATC) possible.
Page 116 114 GETTING TO KNOW YOUR VEHICLE To change the rear system settings: • Press the REAR CLIMATE button on the touchscreen to change control to rear control mode, Rear display (below) will appear. Control functions now operate rear system. • To return to the Front screen on the Uconnect radio, press the Front Climate or “Done”...
Page 117 GETTING TO KNOW YOUR VEHICLE 115 Icon Description Front Climate Button Press and release this button to change the display on the Uconnect radio back to the Front Cli- mate Controls. Rear Passenger Temperature Up and Down Buttons Provides the rear passengers with independent temperature control. Push the up arrow button on the touchscreen to increase the temperature.
Page 118 116 GETTING TO KNOW YOUR VEHICLE Icon Description Rear Passenger Climate Control OFF Button Press and release this button to turn the Rear Climate Controls off. Panel Mode Panel Mode Press this button on the touchscreen to change the air distribution mode to Panel Mode. In Panel Mode, air comes from the outlets in the instrument panel.
Page 119 GETTING TO KNOW YOUR VEHICLE 117 Rear Automatic Temperature Control (ATC) — If Equipped The rear ATC system has floor air outlets underneath the passengers’ seats, and overhead outlets at each outboard rear seating position. The system provides heated air through the floor outlets or cool, dehumidified air through the headliner outlets.
Page 120 118 GETTING TO KNOW YOUR VEHICLE NOTE: • It is not necessary to move the temperature settings. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. Icon Description Rear Mode Control Push this button on the Rear Climate Hard Controls to change the air distribution mode for the rear passengers to one of the following: Panel Mode Panel Mode...
Page 121 GETTING TO KNOW YOUR VEHICLE 119 Icon Description Rear Temperature Control • Rear Passenger Temperature Up Button To change the temperature in the rear of the vehicle, push temperature control up button to raise the temperature. The rear temperature settings are displayed in control head.
Page 122: Operating Tips
120 GETTING TO KNOW YOUR VEHICLE Operating Tips blower setting on high. This will ensure adequate system lubrication to minimize the possibility of compressor dam- NOTE: Refer to the chart at the end of this section for age when the system is started again. suggested control settings for various weather conditions.
Page 123 GETTING TO KNOW YOUR VEHICLE 121 Operating Tips Chart...
Page 124: Windows
122 GETTING TO KNOW YOUR VEHICLE WINDOWS Power Windows You can control either the front or rear windows using controls located on the driver’s door trim panel. The driver may lock out the rear power windows by pushing the bar control just below the power window controls.
Page 125 GETTING TO KNOW YOUR VEHICLE 123 Auto Up Feature With Anti-Pinch Protection — If Equipped The front driver and front passenger controls may be equipped with an Auto Up feature. Lift the window control fully upward to the second detent, release, and the window will go up automatically.
Page 126 124 GETTING TO KNOW YOUR VEHICLE The controls will operate only when the ignition switch is WARNING! in the ON/RUN or ACC position and during power accessory delay. There is no anti-pinch protection when the window is almost closed. To avoid personal injury be sure to clear NOTE: The controls will not operate if the driver has your arms, hands, fingers and all objects from the activated the Power Window Lockout.
Page 127: Tri-Pane Panoramic Sunroof - If Equipped
GETTING TO KNOW YOUR VEHICLE 125 Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
Page 128: Opening Sunroof
126 GETTING TO KNOW YOUR VEHICLE NOTE: If the sunshade is in the closed position when the WARNING! (Continued) open switch is pushed, the sunshade will automatically ON/RUN mode. Occupants, particularly unattended cycle to the halfway open position prior to the sunroof children, can become entrapped by the power sun- opening.
Page 129: Closing Sunroof
GETTING TO KNOW YOUR VEHICLE 127 Closing Sunroof Power Sun Shade — If Equipped Express Mode Opening Power Shade — Express Mode Push the switch forward and release it within one second Push the shade switch rearward and release it within one and the sunroof will close automatically from any position.
Page 130: Pinch Protect Feature
128 GETTING TO KNOW YOUR VEHICLE and stop automatically. This is called “Express Close”. Sunroof Maintenance During Express Close operation, any other actuation of the Use only a non-abrasive cleaner and a soft cloth to clean the switch will stop the shade. glass panel.
Page 131 GETTING TO KNOW YOUR VEHICLE 129 The hood release lever (to open the primary latch) and safety latch (to open the secondary latch) must be released to open the hood. 1. Pull the hood release lever located under the driver’s side of the instrument panel.
Page 132: Closing
130 GETTING TO KNOW YOUR VEHICLE Closing LIFTGATE 1. Hold up the hood with one hand and with the other Opening hand remove the support rod from its seat and reinsert To Unlock/Enter The Liftgate it into the locking tab. The liftgate may be released in several ways: 2.
Page 133: Closing
GETTING TO KNOW YOUR VEHICLE 131 The key fob and the overhead console button will release NOTE: If 1st Press of key fob Unlocks “All Doors” is the liftgate when the liftgate is locked. The outside handle programmed in Uconnect Settings, all doors will unlock requires the liftgate to be unlocked.
Page 134: Power Liftgate - If Equipped
132 GETTING TO KNOW YOUR VEHICLE • When the liftgate is fully open, the liftgate will close WARNING! • When the liftgate is moving, the liftgate will reverse • Driving with the liftgate open can allow poisonous Push the Power Liftgate button on the Overhead Console exhaust gases into your vehicle.
Page 135 GETTING TO KNOW YOUR VEHICLE 133 The key fob and the overhead console button will operate To Close The Liftgate the liftgate when the liftgate is locked. The outside handle The liftgate can also be closed using the Rear Interior requires the liftgate to be unlocked.
Page 136: Hands-Free Liftgate - If Equipped
134 GETTING TO KNOW YOUR VEHICLE Hands-Free Liftgate — If Equipped NOTE: To open the Hands-Free Liftgate requires a valid Passive Entry key fob within 5 ft (1.5 m) of the door handle. If a valid Passive Entry key fob is not within 5 ft (1.5 m), the liftgate will not respond to any kicks.
Page 137 GETTING TO KNOW YOUR VEHICLE 135 • If the power liftgate encounters multiple obstructions Gas props support the liftgate in the open position. How- within the same cycle, the system will automatically ever, because the gas pressure drops with temperature, it stop.
Page 138: Cargo Area Features
136 GETTING TO KNOW YOUR VEHICLE Cargo Area Features GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three hand-held transmitters that Cargo Area Storage operate devices such as garage door openers, motorized When the third row seats are not in the stowed position, gates, lighting or home security systems.
Page 139: Before You Begin Programming Homelink
GETTING TO KNOW YOUR VEHICLE 137 Before You Begin Programming HomeLink Programming A Rolling Code Be sure that your vehicle is parked outside of the garage For programming garage door openers that were manufac- before you begin programming. tured after 1995. These garage door openers can be identi- fied by the “LEARN”...
Page 140 138 GETTING TO KNOW YOUR VEHICLE 4. Continue to hold both buttons and observe the indicator light. The HomeLink indicator will flash slowly and then rapidly after HomeLink has received the frequency signal from the hand-held transmitter. Release both buttons after the indicator light changes from slow to rapid.
Page 141 GETTING TO KNOW YOUR VEHICLE 139 To program the remaining two HomeLink buttons, repeat 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) each step for each remaining button. DO NOT erase the away from the HomeLink button you wish to program channels.
Page 142: Canadian/Gate Operator Programming
140 GETTING TO KNOW YOUR VEHICLE Reprogramming A Single HomeLink Button (Non- It may be helpful to unplug the device during the cycling Rolling Code) process to prevent possible overheating of the garage door or gate motor. To reprogram a channel that has been previously trained, follow these steps: 1.
Page 143: Using Homelink
GETTING TO KNOW YOUR VEHICLE 141 NOTE: Using HomeLink • If the indicator light stays on constantly, programming To operate, push and release the programmed HomeLink is complete and the garage door/device should acti- button. Activation will now occur for the programmed vate when the HomeLink button is pressed.
Page 144: General Information
142 GETTING TO KNOW YOUR VEHICLE • Push the LEARN button on the Garage Door Opener to WARNING! (Continued) complete the training for a Rolling Code. use a garage door opener without these safety fea- • Did you unplug the device for programming and re- tures.
Page 145: Internal Equipment
GETTING TO KNOW YOUR VEHICLE 143 INTERNAL EQUIPMENT Front Door Storage Both interior front door panels have multiple pockets for Storage storage. Glove Compartment The glove compartment is located on the passenger side of the instrument panel. To open the glove compartment, pull the release handle. Front Door Storage WARNING! If containers of hot liquid are placed in the bottle...
Page 146 144 GETTING TO KNOW YOUR VEHICLE Instrument Panel Drawer There is a storage drawer located in the lower center of the instrument panel. It can be released by pushing the access button above it. The drawer is actuator assisted once the access button is pushed.
Page 147 GETTING TO KNOW YOUR VEHICLE 145 Front Seatback Storage — If Equipped The front seatbacks have a storage pocket on some models. Drawer Fully Open CAUTION! Front Seatback Storage The storage drawer must be closed while driving. If left open during a collision, additional damage may occur to property or the drawer mechanism.
Page 148: Power Outlets
146 GETTING TO KNOW YOUR VEHICLE Umbrella Holder An umbrella holder has been conveniently molded into the front door entry scuff moldings. Coat Hook Power Outlets Your vehicle is equipped with 12 Volt (15 Amp) power outlets, and 5 Volt (2.5 Amp) USB power outlets, that can Umbrella Holder be used to power cellular phones, small electronics and Coat Hooks —...
Page 149 GETTING TO KNOW YOUR VEHICLE 147 NOTE: • All accessories connected to the “battery” powered outlets should be removed or turned off when the vehicle is not in use to protect the battery against discharge. • To ensure proper cigar lighter operation, a Mopar knob and element must be used.
Page 150 148 GETTING TO KNOW YOUR VEHICLE Front USB Charge Only Port Rear Power Outlet In addition to the front power outlets, there is also a power NOTE: The USB outlet in the bottom of the instrument outlet located in the rear cargo area. panel can be switched from “ignition”...
Page 151 GETTING TO KNOW YOUR VEHICLE 149 WARNING! (Continued) • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 152: Power Inverter - If Equipped
150 GETTING TO KNOW YOUR VEHICLE Power Inverter — If Equipped The Power Inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the There is a 115 Volt, 150 Watt Power Inverter outlet located Power Inverter will automatically shut down.
Page 153: Smoker's Package Kit - If Equipped
GETTING TO KNOW YOUR VEHICLE 151 After a few seconds, the lighter automatically returns to its The left rear trim panel cupholder is designed to accom- initial position and is ready to be used. modate a second ash receiver, if desired. Overhead Storage With Sunglass Storage WARNING! At the front of the overhead console, a compartment is...
Page 154: Roof Luggage Rack - If Equipped
152 GETTING TO KNOW YOUR VEHICLE The door will slowly rotate to the full open position. Roof Rack Full Open Position 1 — Side Rail ROOF LUGGAGE RACK — IF EQUIPPED 2 — Crossbar The crossbars and side rails are designed to carry weight The roof rack does not increase the total load carrying on vehicles equipped with a luggage rack.
Page 155: Deploying The Crossbars
GETTING TO KNOW YOUR VEHICLE 153 Deploying The Crossbars 1. To deploy the crossbars, completely loosen the thumb screws at both ends of the crossbar and lift the crossbar from its stowed position in the side rail. Repeat with crossbar on the opposite side. Removing Crossbars CAUTION! Use care when removing and handling the crossbars to...
Page 156 154 GETTING TO KNOW YOUR VEHICLE 2. Bend the crossbar supports at each end, taking care to keep hand clear of pivoting joint. Slide the thumb screw down. Positioning Crossbars 4. Once the crossbar is in place, tighten both thumb screws completely.
Page 157: Stowing The Crossbars
GETTING TO KNOW YOUR VEHICLE 155 CAUTION! Use care when removing and handling the crossbars to prevent damage to the vehicle. 2. Starting with the one crossbar, bend up the pivot supports at each end. Installing Crossbars 5. Deploy and tighten the second crossbar to complete the deployment of the crossbars.
Page 158 156 GETTING TO KNOW YOUR VEHICLE 3. Then, position the crossbar along the correct side rail. 4. The crossbar will nest fully within the side rail. Make sure the letters on the crossbar align with the matching letters on the side rail. Crossbar To Side Rail Stowing Crossbars...
Page 159 GETTING TO KNOW YOUR VEHICLE 157 5. Once the driver’s side crossbar is in place, tighten the thumb screws completely. Stowed Crossbars NOTE: Tightening Crossbar • To help control wind noise, stow the crossbars in the side 6. Repeat the procedure to stow the second crossbar on the rails when they are not in use.
Page 160 158 GETTING TO KNOW YOUR VEHICLE WARNING! CAUTION! (Continued) points if needed. Tie loops are intended as supple- Cargo must be securely tied down before driving your mentary tie down points only. Do not use ratcheting vehicle. Improperly secured loads can fly off the ve- mechanisms with the tie loops.
Page 161 GETTING TO KNOW YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT CLUSTER ....160 WARNING LIGHTS AND MESSAGES ..173 ▫...
Page 162: Instrument Cluster
160 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster...
Page 163: Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL 161 • Electric Range: shows electric range, along with a teal Instrument Cluster Descriptions gauge showing battery % (state of charge 0-100%). 1. % Power Gauge • All Range: shows for electric, hybrid and total range, •...
Page 164: Instrument Cluster Display
162 GETTING TO KNOW YOUR INSTRUMENT PANEL • Hybrid Info INSTRUMENT CLUSTER DISPLAY • Trip (Trip A/Trip B) Your vehicle is equipped with an Instrument Cluster Display, which offers useful information to the driver. With • Audio the ignition in the STOP/OFF position (and the key •...
Page 165: Oil Life Reset
GETTING TO KNOW YOUR INSTRUMENT PANEL 163 • Up Arrow Button Oil Life Reset • Your vehicle is equipped with an engine oil change Push and release the up arrow button to scroll indicator system. The “Oil Change Due” message will upward through the Main Menu items.
Page 166: Fuel And Oil Refresh Mode
164 GETTING TO KNOW YOUR INSTRUMENT PANEL Keyless Enter-N-Go — Ignition 4. Hold the OK button to reset the “Oil Life” to 100%. 5. Push the up arrow button to exit the instrument cluster display menu screen. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset.
Page 167: Keysense Cluster Messages - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL 165 engine will run whenever the vehicle is operational (no KeySense Cluster Messages — If Equipped electric only operation) until the low fuel level warning is When the KeySense key is in use there will be: activated.
Page 168: Instrument Cluster Display Menu Items
166 GETTING TO KNOW YOUR INSTRUMENT PANEL • If the Tire Pressure system requires service, “Service Tire Instrument Cluster Display Menu Items Pressure System” is displayed. NOTE: The Instrument Cluster Display menu items dis- • Tire PSI is an information only function and cannot be play in the center of the instrument cluster.
Page 169 GETTING TO KNOW YOUR INSTRUMENT PANEL 167 Oil Life (Hold OK Button To Reset) Hybrid Info Push and release the up or down arrow button until The “Hold OK to Reset” instruction will be displayed at all Hybrid Info is highlighted in the instrument cluster dis- times, but the following conditions will need to be met in play.
Page 170 168 GETTING TO KNOW YOUR INSTRUMENT PANEL Trip Info Hold the OK button to reset feature information. Push and release the up or down arrow button until Trip Audio Info is highlighted in the instrument cluster display. Push Push and release the up or down arrow button until Audio the left or right arrow button to scroll through the Trip A is highlighted in the instrument cluster display.
Page 171 GETTING TO KNOW YOUR INSTRUMENT PANEL 169 Screen Setup Instrument Cluster Display Screen Setup Options: • None 1 — Left Side • Energy Economy • Efficiency Coach (Default) • Charge/ Power • None 2 — Upper Left • Compass (Default) •...
Page 172 170 GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Screen Setup Options: • None 3 — Upper Right • Compass • Outside Temp • Time • Average MPG (or “L/100km”, or “km/L”) • Current MPG (or “L/100km”, or “km/L”) •...
Page 173: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL 171 Speed Warning — If Equipped Battery Saver On/Battery Saver Mode Message — Electrical Load Reduction Actions — If Equipped Push and release the up or down arrow button until Speed Warning is highlighted in the instrument cluster display. The vehicle is equipped with an Intelligent Battery Sensor Push and release the OK button to enter speed warning.
Page 174 172 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: are larger than the capability of charging system. The charging system is still functioning properly. • The charging system is independent from load reduc- • Turning on all possible vehicle electrical loads (e.g. tion.
Page 175: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL 173 What to do when an electrical load reduction action WARNING LIGHTS AND MESSAGES message is present (“Battery Saver On” or “Battery Saver Red Warning Lights Mode”) — Air Bag Warning Light During a trip: This light will turn on for four to eight seconds as a bulb •...
Page 176 174 GETTING TO KNOW YOUR INSTRUMENT PANEL — Brake Warning Light NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level conditions. This light monitors various brake functions, including The vehicle should have service performed, and the brake brake fluid level and parking brake application.
Page 177 GETTING TO KNOW YOUR INSTRUMENT PANEL 175 The light also will turn on when the parking brake is engine off immediately and call for service. Refer to “If applied with the ignition switch in the ON/RUN position. Your Engine Overheats” in “In Case Of Emergency” for further information.
Page 178 176 GETTING TO KNOW YOUR INSTRUMENT PANEL stall and your vehicle may require towing. The light will run the engine at idle or slightly faster, with the transmis- come on when the ignition is placed in the ON/RUN or sion in PARK or NEUTRAL, until the light turns off. Once ACC/ON/RUN position and remain on briefly as a bulb the light turns off, you may continue to drive normally.
Page 179: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL 177 If the vehicle is moving, there will also be a single chime. charger/charging station and not your vehicle. It is recommended to try a different charging station to — Liftgate Open Warning Light verify.
Page 180 178 GETTING TO KNOW YOUR INSTRUMENT PANEL • This light will come on when the vehicle is in an ESC If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock event.
Page 181 GETTING TO KNOW YOUR INSTRUMENT PANEL 179 — LaneSense Failure Warning Light — If — Forward Collision Warning Light — If Equipped Equipped This light will turn on when the LaneSense system is not This telltale will turn on to indicate a fault in the Forward operating and needs service.
Page 182 180 GETTING TO KNOW YOUR INSTRUMENT PANEL When the engine is running, the MIL may flash to alert — Tire Pressure Monitoring System (TPMS) serious conditions that could lead to immediate loss of Warning Light power or severe catalytic converter damage. The vehicle The warning light switches on and a message is displayed should be serviced as soon as possible if this occurs.
Page 183 GETTING TO KNOW YOUR INSTRUMENT PANEL 181 on the vehicle placard or tire inflation pressure label, you minute and then remain continuously illuminated. This should determine the proper tire inflation pressure for sequence will continue upon subsequent vehicle start-ups those tires.) as long as the malfunction exists.
Page 184: Yellow Indicator Lights
182 GETTING TO KNOW YOUR INSTRUMENT PANEL — KeySense Indicator Light — If Equipped CAUTION! (Continued) The KeySense indicator is solid green when a KeySense key Monitoring System (TPMS) sensor to become inoper- is detected upon startup of the vehicle. The indicator will able.
Page 185: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL 183 • “Plugged In And Charging” — Adaptive Cruise Control (ACC) Set With Target Detected Light — If Equipped • “Plugged In And Waiting to Charge On A Set Schedule” This light will turn on when the Adaptive Cruise Control •...
Page 186: Blue Indicator Lights
184 GETTING TO KNOW YOUR INSTRUMENT PANEL — Speed Control ON Indicator Light forward (toward the front of the vehicle) to turn on the high beams. Pull the multifunction lever rearward (toward This light will turn on when the electronic speed control is the rear of the vehicle) to turn off the high beams.
Page 187: Onboard Diagnostic System (Obd Ii) Cybersecurity
GETTING TO KNOW YOUR INSTRUMENT PANEL 185 CAUTION! WARNING! (Continued) • If unauthorized equipment is connected to the OBD • Prolonged driving with the MIL on could cause II connection port, such as a driver-behavior tracking further damage to the emission control system. It device, it may: could also affect fuel economy and driveability.
Page 188 186 GETTING TO KNOW YOUR INSTRUMENT PANEL For states that require an Inspection and Mainte- 3. Approximately 15 seconds later, one of two things will nance (I/M), this check verifies the “Malfunction happen: Indicator Light (MIL)” is functioning and is not on •...
Page 189 SAFETY CONTENTS ▫ Seat Belt Systems ..... .215 SAFETY FEATURES ..... .188 ▫...
Page 190: Safety Features
188 SAFETY SAFETY FEATURES These are all normal characteristics of ABS. Anti-Lock Brake System (ABS) WARNING! The Anti-Lock Brake System (ABS) provides increased • The ABS contains sophisticated electronic equip- vehicle stability and brake performance under most brak- ment that may be susceptible to interference caused ing conditions.
Page 191: Electronic Brake Control System
SAFETY benefits of anti-lock brakes. If the “Anti-Lock Brake Warn- WARNING! (Continued) ing Light” does not come on when the ignition is turned to • The capabilities of an ABS equipped vehicle must the ON/RUN mode, have the light repaired as soon as never be exploited in a reckless or dangerous manner possible.
Page 192 190 SAFETY and controls the wheel spin across a driven axle. If one WARNING! wheel on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This The Brake Assist System (BAS) cannot prevent the will allow more vehicle torque to be applied to the wheel natural laws of physics from acting on the vehicle, nor that is not spinning.
Page 193 SAFETY Dynamic Steering Torque (DST) Electronic Roll Mitigation (ERM) Dynamic Steering Torque is a feature of the ESC and This system anticipates the potential for wheel lift by Electric Power Steering (EPS) modules that provides monitoring the driver’s steering wheel input and the speed torque at the steering wheel for certain driving conditions of the vehicle.
Page 194 192 SAFETY Electronic Stability Control (ESC) Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to This system enhances directional control and stability of adapt your speed and driving to the prevailing road the vehicle under various driving conditions.
Page 195 SAFETY Partial Off WARNING! (Continued) The “Partial Off” mode is intended for times when a more the performance of the ESC system. Changes to the spirited driving experience is desired. This mode may steering system, suspension, braking system, tire modify TCS and ESC thresholds for activation, which type and size or wheel size may adversely affect ESC allows for more wheel spin than normally allowed.
Page 196 194 SAFETY 30 mph (48 km/h), see your authorized dealer as soon as WARNING! possible to have the problem diagnosed and corrected. • When in “Partial Off” mode, the TCS functionality The “ESC Activation/Malfunction Indicator Light” (lo- of ESC, (except for the limited slip feature described cated in the instrument cluster) starts to flash as soon as the in the TCS section), has been disabled and the “ESC tires lose traction and the ESC system becomes active.
Page 197 SAFETY • HSA will work in REVERSE gear and all forward gears. The “ESC OFF Indicator Light” indicates the customer has elected to have the Electronic Sta- The system will not activate if the transmission is in bility Control (ESC) in a reduced mode. PARK or NEUTRAL.
Page 198: Regenerative Braking System (Rbs) - Hybrid
196 SAFETY Disabling And Enabling HSA Regenerative Braking System (RBS) — Hybrid This feature can be turned on or turned off. To change the Your vehicle has a Regenerative Braking System (RBS). The current setting, proceed as follows: RBS reduces the high voltage battery consumption of the vehicle, particularly in stop-and-go city traffic.
Page 199: Auxiliary Driving Systems
SAFETY AUXILIARY DRIVING SYSTEMS BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when Blind Spot Monitoring (BSM) — If Equipped the vehicle is in PARK. The Blind Spot Monitoring (BSM) system uses two radar- The BSM detection zone covers approximately one lane based sensors, located inside the rear bumper fascia, to width on both sides of the vehicle 12 ft (3.8 m).
Page 200 198 SAFETY The area on the rear fascia where the radar sensors are If the system detects degraded performance due to con- located must remain free of snow, ice, and dirt/road tamination or foreign objects, a message will warn you of a contamination so that the BSM system can function prop- blocked sensor and the warning indicators in side view erly.
Page 201 SAFETY Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. Warning Light Location The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary.
Page 202 200 SAFETY Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly with a relative speed less side and enter the rear detection zone with a relative speed than 15 mph (24 km/h) and the vehicle remains in the of less than 30 mph (48 km/h).
Page 203 SAFETY Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, snow banks, car washes etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
Page 204 202 SAFETY The BSM system will not alert you of objects that are WARNING! (Continued) traveling in the opposite direction of the vehicle in adjacent glance over your shoulder, and use your turn signal lanes. before changing lanes. Failure to do so can result in serious injury or death.
Page 205 SAFETY When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, includ- ing reducing the radio volume. WARNING! Rear Cross Path Detection (RCP) is not a back up aid system.
Page 206 204 SAFETY mirror based on a detected object. However, when the Blind Spot Alert Off system is operating in Rear Cross Path (RCP) mode, the When the BSM system is turned off there will be no visual system will respond with both visual and audible alerts or audible alerts from either the BSM or RCP systems.
Page 207: Forward Collision Warning (Fcw) With Mitigation - If Equipped
SAFETY NOTE: Changes or modifications not expressly approved applied sufficient brake force, the system will compensate by the party responsible for compliance could void the and provide additional brake force as required. user’s authority to operate the equipment. If a FCW with Mitigation event begins at a speed below Forward Collision Warning (FCW) With Mitigation 26 mph (42 km/h), the system may provide the maximum braking possible to mitigate the potential forward collision.
Page 208 206 SAFETY When the system determines a collision with the vehicle in WARNING! (Continued) front of you is no longer probable, the warning message type of potential collision. The driver has the respon- will be deactivated. sibility to avoid a collision by controlling the vehicle NOTE: via braking and steering.
Page 209 SAFETY • FCW will be disabled like ACC, with the unavailable Changing the FCW status to the “Near” setting, allows the system to warn the driver of a possible collision with the screens. vehicle in front when the distance between the vehicle in •...
Page 210: Tire Pressure Monitor System (Tpms)
208 SAFETY This indicates there is an internal system fault. Although The TPMS will warn the driver of a low tire pressure if the the vehicle is still drivable under normal conditions, have tire pressure falls below the low-pressure warning limit for the system checked by an authorized dealer.
Page 211 SAFETY For example, your vehicle may have a recommended cold CAUTION! (Continued) (parked for more than three hours) placard pressure of 33 psi • Using aftermarket tire sealants may cause the Tire (227 kPa). If the ambient temperature is 68°F (20°C) and the Pressure Monitoring System (TPMS) sensor to be- measured tire pressure is 28 psi (193 kPa), a temperature drop come inoperable.
Page 212 210 SAFETY • The TPMS is not a substitute for proper tire mainte- • Various tire pressure monitoring system messages, nance, and it is the driver’s responsibility to maintain which display in the instrument cluster correct tire pressure using an accurate tire pressure •...
Page 213 SAFETY The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information. Service TPMS Warning When a system fault is detected, the “Tire Pressure Moni- toring Telltale Light”...
Page 214: Wheels/Tires
212 SAFETY • Installing some form of aftermarket window tinting that addition, the instrument cluster will display a “SER- affects radio wave signals. VICE TPM SYSTEM” message for five seconds and then display dashes (- -) in place of the pressure value. •...
Page 215: Occupant Restraint Systems
SAFETY To deactivate the TPMS, first, replace all four wheel and General Information tire assemblies (road tires) with tires not equipped with The following regulatory statement applies to all radio Tire Pressure Monitoring (TPM) Sensors. Then, drive the frequency (RF) devices equipped in this vehicle: vehicle for 20 minutes above 15 mph (24 km/h).
Page 216: Important Safety Precautions
214 SAFETY Some of the safety features described in this section may be restraints or belt-positioning booster seats should ride standard equipment on some models, or may be optional properly buckled up in a vehicle with a rear seat. equipment on others. If you are not sure, ask your autho- 4.
Page 217: Seat Belt Systems
SAFETY Enhanced Seat Belt Use Reminder System (BeltAlert) WARNING! Driver and Passenger BeltAlert (if equipped) • Never place a rear-facing child restraint in front of an BeltAlert is a feature intended to remind the driver air bag. A deploying passenger front air bag can and outboard front seat passenger (if equipped with cause death or serious injury to a child 12 years or outboard front passenger seat BeltAlert) to buckle their...
Page 218 216 SAFETY BeltAlert) (the outboard front passenger seat BeltAlert is pets be restrained in the rear seat (if equipped) in pet not active when the outboard front passenger seat is harnesses or pet carriers that are secured by seat belts, and unoccupied).
Page 219 SAFETY WARNING! WARNING! (Continued) • Wearing your seat belt incorrectly could make your • Relying on the air bags alone could lead to more injuries in a collision much worse. You might suffer severe injuries in a collision. The air bags work with internal injuries, or you could even slide out of the your seat belt to restrain you properly.
Page 220 218 SAFETY WARNING! (Continued) WARNING! (Continued) your authorized dealer immediately and have it likely to hit your head in a collision if you do not fixed. wear your shoulder belt. The lap and shoulder belt • A seat belt that is buckled into the wrong buckle will are meant to be used together.
Page 221 SAFETY Pulling Out The Latch Plate Inserting Latch Plate Into Buckle 3. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.”...
Page 222 220 SAFETY 4. Position the lap belt so that it is snug and lies low across 6. To release the seat belt, push the red button on the your hips, below your abdomen. To remove slack in the buckle. The seat belt will automatically retract to its lap belt portion, pull up on the shoulder belt.
Page 223 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the In the front and second row outboard seats the shoulder shoulder belt anchorage to be adjusted in the upward belt can be adjusted upward or downward to position the position without pushing or squeezing the release button.
Page 224 222 SAFETY Second Row Center (If Equipped) And Third Row Center Seat Belt Operating Instructions The second row center (if equipped) and third row center seat belts feature a seat belt with a mini-latch plate and buckle, which allows the seat belt to detach from the lower anchor when the seat is folded.
Page 225 SAFETY 2. Grasp the mini-latch plate and pull the seat belt over the 3. Route the shoulder belt to the inside of the left head seat. restraint. Mini-Latch Plate Mini-Latch And Buckle Connected...
Page 226 224 SAFETY 4. When the seat belt is long enough to fit, insert the 5. Sit back in seat. Slide the regular latch plate up the mini-latch plate into the mini-buckle until you hear a webbing as far as necessary to allow the seat belt to go “click.”...
Page 227 SAFETY 6. When the seat belt is long enough to fit, insert the latch 8. Position the shoulder belt on your chest so that it is plate into the buckle until you hear a “click.” comfortable and not resting on your neck. The retractor will withdraw any slack in the seat belt.
Page 228 226 SAFETY WARNING! (Continued) WARNING! • When reattaching the mini-latch plate and mini- • ONLY use a Seat Belt Extender if it is physically buckle, ensure the seat belt webbing is not twisted. required in order to properly fit the original seat belt If the webbing is twisted, follow the preceding system.
Page 229 SAFETY Seat Belts And Pregnant Women Seat Belt Pretensioner The front seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision.
Page 230 228 SAFETY Switchable Automatic Locking Retractors (ALR) The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) which is used to secure a child restraint system. For additional information, refer to “Installing Child Restraints Using The Vehicle Seat Belt”...
Page 231 SAFETY If the passenger seating position is equipped with an ALR WARNING! (Continued) and is being used for normal usage, only pull the seat belt • Only use a rear-facing child restraint in a vehicle webbing out far enough to comfortably wrap around the with a rear seat.
Page 232 230 SAFETY WARNING! • The seat belt assembly must be replaced if the switchable Automatic Locking Retractor (ALR) fea- ture or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. •...
Page 233: Supplemental Restraint Systems (Srs)
SAFETY Supplemental Restraint Systems (SRS) Some of the safety features described in this section may be standard equipment on some models, or may be optional equipment on others. If you are not sure, ask your autho- rized dealer. The air bag system must be ready to protect you in a collision.
Page 234 232 SAFETY • Supplemental Knee Air Bags any part of the system, it turns on the Air Bag Warning Light, either momentarily or continuously. A single chime • Front and Side Impact Sensors will sound to alert you if the light comes on again after •...
Page 235 SAFETY NOTE: If the speedometer, tachometer, or any engine Warning Light will illuminate on the instrument panel. The related gauges are not working, the Occupant Restraint Redundant Air Bag Warning Light will stay on until the Controller (ORC) may also be disabled. In this condition fault is cleared.
Page 236 234 SAFETY WARNING! (Continued) serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
Page 237 SAFETY This vehicle may be equipped with a driver and/or front WARNING! (Continued) passenger seat belt buckle switch that detects whether the the air bags and you could be injured because the air driver or front passenger seat belt is buckled. The seat belt bags may no longer be functional.
Page 238 236 SAFETY Because air bag sensors measure vehicle deceleration over The Occupant Classification System (OCS) consists of the time, vehicle speed and damage by themselves are not following: good indicators of whether or not an air bag should have • Occupant Restraint Controller (ORC) deployed.
Page 239 SAFETY The OCS will NOT prevent deployment of the Passenger Front Passenger Seat Oc- Front Passenger Air Bag Advanced Front Air Bag. The OCS may reduce the inflation cupant Status Output rate of the Passenger Advanced Front Air Bag if the OCS Unoccupied seat Reduced-power deploy-...
Page 240 238 SAFETY The OCS determines the front passenger’s most probable classification. The OCS estimates the seated weight on the front passenger seat and where that weight is located. The OCS communicates the classification status to the ORC. The ORC uses the classification to determine whether the Passenger Advanced Front Air Bag inflation rate should be adjusted.
Page 241 SAFETY • Accessories that may change the seated weight on the The OCS will detect the front passenger’s decreased or increased seated weight, which may result in an adjusted front passenger seat are attached to the front passenger inflation rate of the Passenger Advanced Front Air Bag in a seat.
Page 242 240 SAFETY Not Seated Properly Not Seated Properly...
Page 243 SAFETY WARNING! (Continued) the seatback, sitting upright, facing forward, in the center of the seat, with your feet comfortably on or near the floor. • Do not carry or hold any objects (e.g., backpacks, boxes, etc.) while seated in the front passenger seat. Holding an object may provide an output signal to the OCS that is different than the occupant’s prop- erly seated weight input, which may result in serious...
Page 244 242 SAFETY The passenger seat assembly contains critical OCS compo- be modified or replaced with any part except those nents that may affect the Passenger Advanced Front Air which are approved by FCA US LLC. Bag inflation. In order for the OCS to properly classify the seated weight of a front seat passenger, the OCS compo- WARNING! nents must function as designed.
Page 245 SAFETY Supplemental Seat-Mounted Side Air Bags (SABs) are WARNING! located in the outboard side of the front seats. The SABs are • Do not drill, cut, or tamper with the knee impact marked with a “SRS AIRBAG” or “AIRBAG” label sewn into the outboard side of the seats.
Page 246 244 SAFETY When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 247 SAFETY positioned in the area where the SABICs inflate. Children Side Impacts are at an even greater risk of injury from a deploying air The Side Air Bags are designed to activate in certain side bag. impacts. The Occupant Restraint Controller (ORC) deter- The SABICs may help reduce the risk of partial or complete mines whether the deployment of the Side Air Bags in a ejection of vehicle occupants through side windows in...
Page 248 246 SAFETY Side Air Bags are a supplement to the seat belt restraint WARNING! system. Side Air Bags deploy in less time than it takes to • Side Air Bags need room to inflate. Do not lean blink your eyes. against the door or window.
Page 249 SAFETY • Supplemental Side Air Bags The Side Air Bags will not deploy in all rollover events. The rollover sensing system determines if a rollover event may • Supplemental Knee Air Bags be in progress and whether deployment is appropriate. In •...
Page 250 248 SAFETY quickly. However, if you haven’t healed significantly NOTE: within a few days, or if you have any blistering, see your • Air bag covers may not be obvious in the interior trim, doctor immediately. but they will open during air bag deployment. •...
Page 251 SAFETY Enhanced Accident Response System Reset WARNING! (Continued) Procedure you. Do not modify the components or wiring, in- After an event occurs requiring activation of the Enhanced cluding adding any kind of badges or stickers to the Accident Response System, when the system is active, a “ steering wheel hub trim cover or the upper right side Service Hybrid Electric Vehicle System”...
Page 252: Child Restraints
250 SAFETY Event Data Recorder (EDR) NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by This vehicle is equipped with an event data recorder the EDR under normal driving conditions and no personal (EDR).
Page 253 SAFETY Children 12 years or younger should ride properly buckled child. Carefully read and follow all the instructions and up in a rear seat, if available. According to crash statistics, warnings in the child restraint Owner’s Manual and on all children are safer when properly restrained in the rear the labels attached to the child restraint.
Page 254 252 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Child Size, Height, Weight Or Age Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convert- younger and who have not reached ible Child Restraint, facing rearward the height or weight limits of their in the rear seat of the vehicle...
Page 255 SAFETY Infant And Child Restraints two years old. Children should remain rear-facing until they reach the highest weight or height allowed by their Safety experts recommend that children ride rear-facing in convertible child seat. the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child WARNING! restraint.
Page 256 254 SAFETY used in the forward-facing direction are for children who are WARNING! over two years old or who have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat. Do not install a rear-facing car seat using a rear support Children should remain in a forward-facing child seat with a leg in this vehicle.
Page 257 SAFETY 3. Does the shoulder belt cross the child’s shoulder be- WARNING! (Continued) tween their neck and arm? Remove the child restraint before adjusting the ve- 4. Is the lap part of the belt as low as possible, touching the hicle seat position.
Page 258 256 SAFETY Recommendations For Attaching Child Restraints Restraint Type Combined Use Any Attachment Method Shown With An “X” Below Weight of the LATCH – Lower Seat Belt Only LATCH – Lower Seat Belt + Top Child + Child Anchors Only Anchors + Top Tether Anchor Restraint...
Page 259 SAFETY Lower Anchors And Tethers For CHildren (LATCH) used with the top tether anchorage to install the child Restraint System restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren.
Page 260 258 SAFETY 7 Passenger LATCH Positions Second Row Quad Lower Anchorage Symbol (2 Anchorages Per Seating Position) Top Tether Anchorage Symbol Frequently Asked Questions What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH anchor- child and the child restraint is 65 lbs...
Page 261 SAFETY Frequently Asked Questions Can the LATCH anchorages and the Do not use the seat belt when you seat belt be used together to attach a use the LATCH anchorage system to rear-facing or forward-facing child attach a rear-facing or forward-facing restraint? child restraint.
Page 262 260 SAFETY Frequently Asked Questions Can the head restraints be removed? The 2nd row head restraints are re- movable. The 3rd row center head restraint is removable, but the 3rd row outboard head restraints are not removable. NOTE: If the folding, non-adjustable head restraint inter- feres with the installation of the child restraint, the head restraint may be folded and the child seat installed in front of it.
Page 263 SAFETY Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Page 264 262 SAFETY LATCH Anchorages (Third Row 60/40 Anchorages Shown) Tether Strap Anchorage (Second Row Anchorage Shown) Locating The Upper Tether Anchorages There are tether strap anchorages located behind all second row seating positions. The third row has a tether anchor on the 40% seat for the right outboard position and in the center of the 60% seat for either the center or left outboard seating position.
Page 265 SAFETY Tether Strap Anchorages (Second Row Bench Anchorage Tether Strap Anchorages (Third Row 60/40 Anchorage Shown) Shown) LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage.
Page 266 264 SAFETY Center Seat LATCH not use that outboard position. If a child seat in the center position blocks the outboard LATCH anchors or seat belt, This vehicle has 4 lower LATCH anchorages in the third do not install a child seat in that outboard position. row, rear seat.
Page 267 SAFETY 1. Loosen the adjusters on the lower straps and on the 6. Test that the child restraint is installed tightly by pulling tether strap of the child seat so that you can more easily back and forth on the child seat at the belt path. It attach the hooks or connectors to the vehicle anchor- should not move more than 1 inch (25.4 mm) in any ages.
Page 268 266 SAFETY WARNING! WARNING! (Continued) • Follow the child restraint manufacturer’s directions • Improper installation of a child restraint to the exactly when installing an infant or child restraint. LATCH anchorages can lead to failure of the re- straint. The child could be badly injured or killed. The seat belts in the passenger seating positions are Follow the child restraint manufacturer’s directions equipped with a Switchable Automatic Locking Retractor...
Page 269 SAFETY Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle 7 Passenger Stow ‘n Go Seat Automatic Locking Retractor (ALR) Locations Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol 7 Passenger Bench Seat Automatic Locking Retractor (ALR) Locations Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol...
Page 270 268 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to the with the seat belt to attach a forward...
Page 271 SAFETY Installing A Child Restraint With A Switchable WARNING! Automatic Locking Retractor (ALR): Always make sure the head restraint is in its upright Child restraint systems are designed to be secured in position when the seat is to be used by an occupant vehicle seats by lap belts or the lap belt portion of a who is not in a child restraint.
Page 272 270 SAFETY 3. Slide the latch plate into the buckle until you hear a 9. Test that the child restraint is installed tightly by pulling “click.” back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any 4.
Page 273 SAFETY Seat Belt Park Stitch Location Seat Belt Park Stitch If the park stitch interferes with the lock-off features of the Installing Child Restraints Using the Top Tether child restraint, do not use the lock-off feature. Instead, Anchorage switch the seat belt to the locking mode, as described in the steps above or move the car seat to a different seating WARNING! position.
Page 274 272 SAFETY WARNING! (Continued) “Lower Anchors and Tethers for CHildren (LATCH) Restraint System” for the location of approved tether anchorages in your vehicle. Top Tether Anchorage Locations 2nd Row Bench Row 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage.
Page 275 SAFETY 4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Top Tether Anchorage Locations 3rd Row 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your Rear Seat Tether Strap Attachment (Second Row vehicle is equipped with adjustable rear head restraints, Anchorage Shown)
Page 276 274 SAFETY 3. Attach the tether strap hook of the child restraint to the WARNING! (Continued) top tether anchorage as shown in the diagram. • If your vehicle is equipped with a split rear seat, 4. Remove slack in the tether strap according to the child make sure the tether strap does not slip into the restraint manufacturer’s instructions.
Page 277: Transporting Pets
SAFETY Transporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts.
Page 278: Exhaust Gas
276 SAFETY The best protection against carbon monoxide entry into the WARNING! (Continued) vehicle body is a properly maintained engine exhaust • Be sure everyone in your vehicle is in a seat and system. using a seat belt properly. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the Exhaust Gas vehicle, or when the underside or rear of the vehicle is...
Page 279 SAFETY Air Bag Warning Light Floor Mat Safety Information The Air Bag warning light will turn on for four to Always use floor mats designed to fit your vehicle. Only eight seconds as a bulb check when the ignition switch use a floor mat that does not interfere with the operation of is first turned to ON/RUN.
Page 280 278 SAFETY WARNING! (Continued) WARNING! (Continued) • ALWAYS REMOVE THE EXISTING FLOOR MAT moving. Objects can become trapped under accelera- FROM THE VEHICLE before installing any other tor, brake, or clutch pedals and could cause a loss of vehicle control. floor mat.
Page 281: Periodic Safety Checks You Should Make Outside
SAFETY Periodic Safety Checks You Should Make Outside The Vehicle Tires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks.
Page 283 STARTING AND OPERATING CONTENTS STARTING THE ENGINE ....284 ACTIVE NOISE CANCELLATION ... .298 ▫...
Page 284 282 STARTING AND OPERATING ▫ To Set A Desired ACC Speed ....305 ▫ ParkSense Display ..... .324 ▫...
Page 285 STARTING AND OPERATING 283 ▫ Parallel Parking Space Assistance REFUELING THE VEHICLE ....377 Operation/Display ..... .348 VEHICLE LOADING .
Page 286: Starting The Engine
284 STARTING AND OPERATING STARTING THE ENGINE Start the engine with the gear selector in the PARK position. Apply the brake before shifting to any driving Before starting your vehicle, adjust your seat, adjust both range. inside and outside mirrors, and fasten your seat belts. NOTE: In case the ignition switch does not change with the WARNING! push of a button, the key fob may have a low or dead...
Page 287: Cold Weather Operation
STARTING AND OPERATING 285 engine running), which may include the start of the Cold Weather Operation engine depending on conditions such as battery state of If the outside ambient temperature is 32°F or below, the charge and vehicle temperature. instrument cluster will request the vehicle to be plugged to provide conditioning of the vehicle high voltage battery.
Page 288: Engine Break-In Recommendations
286 STARTING AND OPERATING Not In Park” message and the vehicle will remain Drive moderately during the first 300 miles (500 km). After running. Never leave a vehicle out of the PARK position, the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or it could roll.
Page 289: Park Brake
STARTING AND OPERATING 287 PARK BRAKE Electric Park Brake (EPB) Your vehicle is equipped with an Electric Park Brake System (EPB) that offers simple operation, and some additional features that make the park brake more conve- nient and useful. The park brake is primarily intended to prevent the vehicle from rolling while parked.
Page 290 288 STARTING AND OPERATING NOTE: The EPB fault lamp will illuminate if the EPB Once the park brake is fully disengaged, the BRAKE switch is held for longer than 180 seconds. The light will warning lamp in the instrument cluster and the LED extinguish upon releasing the switch.
Page 291 STARTING AND OPERATING 289 WARNING! WARNING! (Continued) • Always fully apply the parking brake when leaving • Never use the PARK position as a substitute for the your vehicle, or it may roll and cause damage or parking brake. Always apply the parking brake fully injury.
Page 292 290 STARTING AND OPERATING To disengage the park brake while the vehicle is in motion, open, the vehicle is at a standstill, and there is no attempt release the switch. If the vehicle is brought to a complete to depress the brake pedal or accelerator pedal, the park stop using the park brake, when the vehicle reaches brake will automatically engage to prevent the vehicle approximately 3 mph (4.8 km/h), the park brake will...
Page 293: Automatic Transmission
STARTING AND OPERATING 291 guide you through the steps necessary to retract the EPB WARNING! (Continued) actuator in order to perform rear brake service. have any doubt about your ability to perform a service Brake Service Mode has requirements that must be met in job, take your vehicle to a competent mechanic.
Page 294 292 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL if be in a vehicle unattended is dangerous for a number the engine speed is higher than idle speed. If your of reasons.
Page 295: Ignition Park Interlock
STARTING AND OPERATING 293 NOTE: You must press and hold the brake pedal while DRIVE, and LOW shift positions. Using the LOW position shifting out of PARK. will increase the rate of deceleration when the accelerator pedal is released in comparison to the DRIVE position. The Ignition Park Interlock transmission gear range (PRNDL) is displayed both above Your vehicle is equipped with a Ignition Park Interlock...
Page 296: Gear Ranges
294 STARTING AND OPERATING Only shift from DRIVE to PARK or REVERSE when the Never attempt to use PARK while the vehicle is in motion. accelerator pedal is released and the vehicle is stopped. Be Apply the parking brake when exiting the vehicle in this sure to keep your foot on the brake pedal when shifting range.
Page 297 STARTING AND OPERATING 295 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure exiting the vehicle to guard against vehicle move- ment and possible injury or damage. those in or near the vehicle. As with all vehicles, you •...
Page 298 296 STARTING AND OPERATING REVERSE (R) WARNING! (Continued) This range is for moving the vehicle backward. Shift into the ignition in the ACC or ON/RUN mode. A child REVERSE only after the vehicle has come to a complete could operate power windows, other controls, or stop.
Page 299 STARTING AND OPERATING 297 LOW (L) CAUTION! This range should be used when descending very steep Towing the vehicle, coasting, or driving for any other grades. Using the LOW position will increase the rate of reason with the transmission in NEUTRAL can cause deceleration when the accelerator pedal is released in severe transmission damage.
Page 300: Active Noise Cancellation
298 STARTING AND OPERATING In the event of a momentary problem, the transmission can ACTIVE NOISE CANCELLATION be reset to regain all forward gears by performing the Your vehicle is equipped with an Active Noise Cancellation following steps: System. This system is designed to address exhaust and engine noise.
Page 301: Speed Control - If Equipped
STARTING AND OPERATING 299 If the “SERVICE POWER STEERING SPEED CONTROL — IF EQUIPPED POWER STEERING ASSIST OFF - SERVICE When engaged, the Speed Control takes over accelerator SYSTEM” message and a steering wheel icon are operations at speeds greater than 25 mph (40 km/h). displayed on the instrument cluster screen, it The Speed Control buttons are located on the right side of indicates that the vehicle needs to be taken to the dealer for...
Page 302: To Activate
300 STARTING AND OPERATING NOTE: In order to ensure proper operation, the Speed WARNING! Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If Leaving the Speed Control system on when not in use this occurs, the Speed Control System can be reactivated by is dangerous.
Page 303: To Accelerate For Passing
STARTING AND OPERATING 301 in “Multimedia” for more information. The speed incre- in “Multimedia” for more information. The speed incre- ment shown is dependant on the chosen speed unit of U.S. ment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): (mph) or Metric (km/h): U.S.
Page 304: To Resume Speed
302 STARTING AND OPERATING To Resume Speed reset your cruise control. ACC utilizes a radar sensor and a forward facing camera designed to detect a vehicle directly To resume a previously set speed, push the RES button and ahead of you. release.
Page 305 STARTING AND OPERATING 303 You can change the mode by using the Cruise Control WARNING! (Continued) buttons. The two control modes function differently. Al- • Does not always fully recognize complex driving ways confirm which mode is selected. conditions, which can result in wrong or missing distance warnings.
Page 306: Adaptive Cruise Control (Acc) Operation
304 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation NOTE: Any chassis/suspension or tire size modifications to the vehicle will effect the performance of the Adaptive The speed control buttons (located on the right side of the Cruise Control and Forward Collision Warning System. steering wheel) operates the ACC system.
Page 307: To Activate/Deactivate
STARTING AND OPERATING 305 • When the driver door is open at low speed. • When the driver seat belt is unbuckled at low speed. To Activate/Deactivate Push and release the Adaptive Cruise Control (ACC) on/off button. The ACC menu in the instrument cluster displays “ACC Ready.”...
Page 308: To Cancel
306 STARTING AND OPERATING • The gear selector is removed from the DRIVE position. If the system is set when the vehicle speed is below 20 mph (32 km/h), the set speed shall be defaulted to 20 mph • The Electronic Stability Control/Traction Control Sys- (32 km/h).
Page 309: To Vary The Speed Setting
STARTING AND OPERATING 307 NOTE: The driver’s preferred units can be selected through the Uconnect Settings if equipped. Refer to “Uconnect Set- • If your vehicle stays at standstill for longer than two tings” in “Multimedia” for more information. The speed seconds, then the driver will either have to push the RES increment shown is dependant on the chosen speed unit of (resume) button, or apply the accelerator pedal to reen-...
Page 310 308 STARTING AND OPERATING • If the button is continually pushed, the set speed will To Decrease Speed continue to decrease in 10 km/h decrements until the While ACC is set, the set speed can be decreased by button is released. The decrease in set speed is reflected pushing the SET (-) button.
Page 311: Setting The Following Distance In Acc
STARTING AND OPERATING 309 speed. When driving up hill and down hill, the ACC system will cancel if the braking temperature exceeds normal range (overheated). Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short).
Page 312 310 STARTING AND OPERATING Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short) To increase the distance setting, push the Distance Setting — Increase button and release. Each time the button is pushed, the distance setting increases by one bar (longer). To decrease the distance setting, push the Distance Setting —...
Page 313: Overtake Aid
STARTING AND OPERATING 311 Indicator” icon, and the system adjusts vehicle speed automatically to maintain the distance setting, regardless of the set speed. The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed.
Page 314: Acc Operation At Stop
312 STARTING AND OPERATING ACC Operation At Stop WARNING! In the event that the ACC system brings your vehicle to a When the ACC system is resumed, the driver must standstill while following a target vehicle, if the target ensure that there are no pedestrians, vehicles or objects vehicle starts moving within two seconds of your vehicle in the path of the vehicle.
Page 315: Display Warnings And Maintenance
STARTING AND OPERATING 313 Adaptive Cruise Control Ready Display Warnings And Maintenance When ACC is activated but the vehicle speed setting has “Wipe Front Radar Sensor In Front Of Vehicle” not been selected, the display will read “Adaptive Cruise Warning Control Ready.”...
Page 316 314 STARTING AND OPERATING NOTE: If the “ACC/FCW Unavailable Wipe Front Radar When the condition that deactivated the system is no Sensor” warning is active Normal (Fixed Speed) Cruise longer present, the system will return to the “Adaptive Control is still available. For additional information refer to Cruise Control Off”...
Page 317: Precautions While Driving With Acc
STARTING AND OPERATING 315 The “ACC/FCW Limited Functionality Clean Front Wind- Service ACC/FCW Warning shield” message can sometimes be displayed while driving If the system turns off, and the instrument cluster displays in adverse weather conditions. The ACC/FCW system will “ACC/FCW Unavailable Service Required”...
Page 318 316 STARTING AND OPERATING Offset Driving Turns And Bends ACC may not detect a vehicle in the same lane that is offset When driving on a curve with ACC engaged, the system from your direct line of travel, or a vehicle merging in from may decrease the vehicle speed and acceleration for stabil- a side lane.
Page 319 STARTING AND OPERATING 317 Using ACC On Hills ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC When driving on hills, ACC may not detect a vehicle in system to take action.
Page 320: General Information
318 STARTING AND OPERATING Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead. Stationary Object And Stationary Vehicle Example General Information The following regulatory statement applies to all Radio...
Page 321: Normal (Fixed Speed) Cruise Control Mode
STARTING AND OPERATING 319 NOTE: Changes or modifications not expressly approved WARNING! by the party responsible for compliance could void the user’s authority to operate the equipment. In the Normal (Fixed Speed) Cruise Control mode, the ity warning does not activate and no alarm will sound Normal (Fixed Speed) Cruise Control Mode even if you are too close to the vehicle ahead since In addition to Adaptive Cruise Control mode, a Normal...
Page 322 320 STARTING AND OPERATING • If the button is continually pushed, the set speed will To Vary The Speed Setting continue to increase in 10 km/h increments until the To Increase Speed button is released. The increase in set speed is reflected When the Normal (Fixed Speed) Cruise Control is set, you in the instrument cluster display.
Page 323: Parksense Rear Park Assist - If Equipped
STARTING AND OPERATING 321 Metric Speed (km/h) To Resume Speed • Pushing the SET (-) button once will result in a 1 km/h To resume a previously set speed, push the RES button and decrease in set speed. Each subsequent tap of the button release.
Page 324 322 STARTING AND OPERATING • ParkSense will retain its last known configuration state NOTE: for the automatic braking function through ignition • The driver can override the automatic braking function cycles. by pushing the gas pedal, turning ParkSense off via ParkSense switch, or changing the gear while the auto- The automatic braking function is intended to assist the matic brakes are being applied.
Page 325: Parksense Sensors
STARTING AND OPERATING 323 ParkSense can be active only when the gear selector is in REVERSE. If ParkSense is enabled at this gear selector position, the system will remain active until the vehicle speed is increased to approximately 7 mph (11 km/h) or above.
Page 326: Parksense Display
324 STARTING AND OPERATING The ParkSense Warning screen is located within the instru- display will show the single arc moving closer to the ment cluster display. It provides visual warnings to indi- vehicle and the tone will change from fast to continuous. cate the distance between the rear fascia/bumper and the detected obstacle.
Page 327 STARTING AND OPERATING 325 Slow Tone/Solid Arc Slow Tone/Solid Arc...
Page 328 326 STARTING AND OPERATING Fast Tone/Flashing Arc Fast Tone/Flashing Arc...
Page 329 STARTING AND OPERATING 327 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc...
Page 330 328 STARTING AND OPERATING WARNING ALERTS Rear Dis- Greater 79-59 inches 59-47 inches 47-39 inches 39-25 inches 25-12 inches Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 inches (in/cm) 79 inches (30 cm) (200 cm) Arcs — Left None None None...
Page 331: Enabling And Disabling Parksense
STARTING AND OPERATING 329 Enabling And Disabling ParkSense system is disabled, the instrument cluster display will show the “PARKSENSE OFF” message for as long as the ParkSense can be enabled and disabled with the ParkSense vehicle is in REVERSE. switch, located on the switch panel below the Uconnect display.
Page 332: Cleaning The Parksense System
330 STARTING AND OPERATING a faulted condition, the instrument cluster display will ParkSense System Usage Precautions show the PARKSENSE UNAVAILABLE WIPE REAR SEN- NOTE: SORS or PARKSENSE UNAVAILABLE SERVICE RE- • Ensure that the rear bumper is free of snow, ice, mud, QUIRED message for five seconds while the vehicle is in dirt and debris to keep the ParkSense system operating REVERSE.
Page 333 STARTING AND OPERATING 331 obstacle behind the fascia/bumper, or it could provide a WARNING! (Continued) false indication that an obstacle is behind the fascia/ disconnected from the vehicle when the vehicle is bumper. not used for towing. Failure to do so can result in •...
Page 334: Parksense Front And Rear Park Assist - If Equipped
332 STARTING AND OPERATING • The automatic braking function may not be applied fast PARKSENSE FRONT AND REAR PARK ASSIST — IF EQUIPPED enough for moving obstacles that approach the rear of the vehicle from the left and / or right sides. The ParkSense Park Assist system provides visual and •...
Page 335: Parksense Sensors
STARTING AND OPERATING 333 ParkSense will retain the last system state (enabled or NOTE: If your vehicle is equipped with the ParkSense disabled) from the last ignition cycle when the ignition is Active Park Assist system, six sensors will be located in the changed to the ON/RUN position.
Page 336: Parksense Visual Alert
334 STARTING AND OPERATING ParkSense Visual Alert and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the display will show the The ParkSense Warning screen will only be displayed if single arc moving closer to the vehicle and the sound tone Sound and Display is selected from the Customer - Pro- will change from slow, to fast, to continuous.
Page 337 STARTING AND OPERATING 335 Slow Tone/Solid Arc Slow Tone/Solid Arc...
Page 338 336 STARTING AND OPERATING Fast Tone/Flashing Arc Fast Tone/Flashing Arc...
Page 339 STARTING AND OPERATING 337 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc...
Page 340 338 STARTING AND OPERATING WARNING ALERTS Rear Dis- Greater 79-59 inches 59-47 inches 47-39 inches 39-25 inches 25-12 inches Less than tance than (200-150 (150-120 (120-100 (100-65 cm) (65-30 cm) 12 inches (inches/cm) 79 inches (30 cm) (200 cm) Arcs — Left None None None...
Page 341 STARTING AND OPERATING 339 Front Park Assist When the vehicle is in DRIVE the ParkSense Warning screen will be displayed when an obstacle is detected. The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s distance and location relative to the vehicle.
Page 342 340 STARTING AND OPERATING No Tone/Flashing Arc Fast Tone/Flashing Arc...
Page 343 STARTING AND OPERATING 341 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc...
Page 344 342 STARTING AND OPERATING WARNING ALERTS Front Distance Greater than 47-39 inches 39-25 inches 25-12 inches Less than (inches/cm) 47 inches (120 (120-100 cm) (100-65 cm) (65-30 cm) 12 inches (30 cm) Arcs — Left None None None 2nd Flashing 1st Flashing Arcs —...
Page 345: Enabling And Disabling Parksense
STARTING AND OPERATING 343 Enabling And Disabling ParkSense system is disabled, the instrument cluster display will show the “PARKSENSE OFF” message for as long as the ParkSense can be enabled and disabled with the ParkSense vehicle is in REVERSE. switch, located on the switch panel below the Uconnect display.
Page 346: Cleaning The Parksense System
344 STARTING AND OPERATING show a PARKSENSE UNAVAILABLE WIPE REAR SEN- If the PARKSENSE UNAVAILABLE SERVICE RE- SORS , PARKSENSE UNAVAILABLE WIPE FRONT SEN- QUIRED message appears in the instrument cluster dis- SORS or PARKSENSE UNAVAILABLE SERVICE RE- play, see an authorized dealer. QUIRED pop up message for five seconds.
Page 347 STARTING AND OPERATING 345 • When you move the gear selector to the REVERSE • There may be a delay in the object detection rate if the position and ParkSense is turned off, the instrument object is moving. This may cause the automatic braking cluster will display “PARKSENSE OFF”...
Page 348: Parksense Active Park Assist System - If Equipped
346 STARTING AND OPERATING ParkSense Active Park Assist system is capable of maneu- CAUTION! vering a vehicle into a parallel or a perpendicular parking • ParkSense is only a parking aid and it is unable to space on either side (i.e., driver side or passenger side). recognize every obstacle, including small obstacles.
Page 349: Enabling And Disabling The Parksense Active Park Assist System
STARTING AND OPERATING 347 The system will also continuously perform the dynamic To disable the ParkSense Active Park Assist system, push vehicle calibration to account for differences such as the ParkSense Active Park Assist switch again (LED turns over or under inflated tires and new tires. off).
Page 350: Parallel Parking Space Assistance Operation/Display
348 STARTING AND OPERATING • The ParkSense Active Park Assist system will allow a • The outer surface and the underside of the front and rear maximum of six shifts between DRIVE and REVERSE. If fascias/bumpers are clean and clear of snow, ice, mud, the maneuver cannot be completed within six shifts, the dirt or other obstruction.
Page 351 STARTING AND OPERATING 349 NOTE: • When searching for a parking space, use the turn signal indicator to select which side of the vehicle you want to perform the parking maneuver. The ParkSense Active Park Assist system will automatically search for a park- ing space on the passenger’s side of the vehicle if the turn signal is not activated.
Page 352 350 STARTING AND OPERATING When an available parking space has been found, and the Once the vehicle is in position, you will be instructed to vehicle is not in position, you will be instructed to move stop the vehicle’s movement and remove your hands from forward to position the vehicle for a parallel parking the steering wheel.
Page 353 STARTING AND OPERATING 351 Once the vehicle is at a standstill with your hands removed When the driver places the gear selector into the REVERSE from the steering wheel, you will be instructed to place the position, the system may instruct the driver to wait for gear selector into the REVERSE position.
Page 354 352 STARTING AND OPERATING • When the system instructs the driver to remove their The system will then instruct the driver to check their surroundings and move backward. hands from the steering wheel, the driver should check their surroundings and begin to back up slowly. •...
Page 355 STARTING AND OPERATING 353 When the vehicle has reached the end of its backward Once the vehicle is in a standstill condition, the driver will movement, the system will instruct the driver to check be instructed to place the gear selector into the DRIVE their surroundings and stop the vehicle’s movement.
Page 356 354 STARTING AND OPERATING When the driver places the gear selector into the DRIVE The system will then instruct the driver to check their position, the system may instruct the driver to wait for surroundings and move forward. steering to complete. Check Surroundings —...
Page 357 STARTING AND OPERATING 355 When the vehicle has reached the end of its forward Once the vehicle is in a standstill condition, the driver will movement, the system will instruct the driver to check be instructed to place the gear selector into the REVERSE their surroundings and stop the vehicle’s movement.
Page 358 356 STARTING AND OPERATING When the driver places the gear selector into the REVERSE position, the system may instruct the driver to wait for steering to complete. Check Surroundings — Move Backward Your vehicle is now in the parallel park position. When the maneuver is complete, the driver will be instructed to check the vehicle’s parking position.
Page 359: Perpendicular Parking Space Assistance Operation/Display
STARTING AND OPERATING 357 Once the driver pushes OK for a perpendicular parking maneuver, the “Active ParkSense Searching - Push OK for Parallel Park” message will appear in the instrument cluster display. Active ParkSense Complete — Check Parking Position Perpendicular Parking Space Assistance Operation/Display When the ParkSense Active Park Assist system is enabled, Active ParkSense Searching Display...
Page 360 358 STARTING AND OPERATING NOTE: When an available parking space has been found, and the vehicle is not in position, you will be instructed to move • When searching for a parking space, use the turn signal forward to position the vehicle for a perpendicular parking indicator to select which side of the vehicle you want to sequence.
Page 361 STARTING AND OPERATING 359 Once the vehicle is in position, you will be instructed to Once the vehicle is at a standstill with your hands removed stop the vehicle’s movement and remove your hands from from the steering wheel, you will be instructed to place the the steering wheel.
Page 362 360 STARTING AND OPERATING When the driver places the gear selector into the REVERSE position, the system may instruct the driver to wait for steering to complete. Check Surroundings — Move Backwards NOTE: • It is the driver’s responsibility to use the brake and Check Surroundings —...
Page 363 STARTING AND OPERATING 361 • The ParkSense Active Park Assist system will allow a maximum of six shifts between DRIVE or REVERSE. If the maneuver cannot be completed within six shifts, the system will cancel and the instrument cluster display will instruct the driver to complete the maneuver manu- ally.
Page 364 362 STARTING AND OPERATING Once the vehicle is in a standstill condition, the driver will When the driver places the gear selector into the DRIVE be instructed to place the gear selector into the DRIVE position, the system may instruct the driver to wait for position.
Page 365 STARTING AND OPERATING 363 The system will then instruct the driver to check their surroundings and move forward. Check Surroundings — STOP NOTE: It is the driver’s responsibility to use the brake and stop the vehicle. The driver should check their surround- Check Surroundings —...
Page 366 364 STARTING AND OPERATING Once the vehicle is in a standstill condition, the driver will be instructed to place the gear selector into the REVERSE position. Check Surroundings — Wait For Steering To Complete The system will then instruct the driver to check their surroundings and move backward.
Page 367 STARTING AND OPERATING 365 Check Surroundings — Move Backwards Active ParkSense Complete — Check Parking Position Your vehicle is now in the perpendicular park position. WARNING! When the maneuver is complete, the driver will be in- structed to check the vehicle’s parking position. If the Drivers must be careful when performing parallel or driver is satisfied with the vehicle position, they should perpendicular parking maneuvers even when using the...
Page 368: Lanesense - If Equipped
366 STARTING AND OPERATING applied), the LaneSense system provides a haptic warning CAUTION! in the form of torque applied to the steering wheel to • The ParkSense Active Park Assist system is only a prompt the driver to remain within the lane boundaries. The LaneSense system will also provide a visual warning parking aid and it is unable to recognize every through the instrument cluster display to prompt the...
Page 369: Turning Lanesense On Or Off
STARTING AND OPERATING 367 Turning LaneSense On Or Off The LaneSense button is located on the switch panel below the Uconnect display. Lane Sense On Message To turn the LaneSense system off, push the LaneSense button again (LED turns on). LaneSense Button NOTE: The LaneSense system will retain the last system state on or off from the last ignition cycle when the ignition...
Page 370: Lanesense Warning Message
368 STARTING AND OPERATING LaneSense Warning Message marking has been detected and the system is ready to provide visual warnings in the instrument cluster The LaneSense system will indicate the current lane drift display if an unintentional lane departure occurs on condition through the instrument cluster display.
Page 371 STARTING AND OPERATING 369 • When the LaneSense system senses a lane drift situation, NOTE: The LaneSense system operates with the similar behavior for a right lane departure when only the right the left thick lane line and left thin line turn solid yellow. lane marking has been detected.
Page 372: Changing Lanesense Status
370 STARTING AND OPERATING • When the LaneSense system senses the lane has been Changing LaneSense Status approached and is in a lane departure situation, the left The LaneSense system has settings to adjust the intensity of thick lane line flashes yellow (on/off) and the left thin the torque warning and the warning zone sensitivity line remains solid yellow.
Page 373 STARTING AND OPERATING 371 After five seconds, this note will disappear. The ParkView When the vehicle is shifted out of REVERSE (with camera Rear Back Up Camera is located on the rear of the vehicle delay turned off), the rear camera mode is exited and the above the rear license plate.
Page 374 372 STARTING AND OPERATING The following table shows the approximate distances for each zone: Zone Distance To The Rear Of The Vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 6.5 ft (30 cm - 2 m) Green 6.5 ft or greater (2 m or greater) NOTE: If snow, ice, mud, or any foreign substance builds...
Page 375: Surround View Camera System - If Equipped
STARTING AND OPERATING 373 SURROUND VIEW CAMERA SYSTEM — IF When the vehicle is shifted out of REVERSE (with camera delay turned on), the camera image will continue to be EQUIPPED displayed for up to 10 seconds after shifting out of RE- Your vehicle may be equipped with the Surround View VERSE unless the vehicle speed exceeds 8 mph (13 km/h), Camera System that allows you to see an on-screen image...
Page 376: 374 Starting And Operating
374 STARTING AND OPERATING The following table shows the approximate distances for each zone: Zone Distance To The Rear Of The Vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 6.5 ft (30 cm - 2 m) Green 6.5 ft or greater (2 m or greater) Modes Of Operation...
Page 377 STARTING AND OPERATING 375 NOTE: Front View • Front tires will be in image when the tires are turned. The Front view will show you what is immediately in front of the vehicle and • Due to wide angle cameras in mirror, the image will is always paired with the Top view of appear distorted.
Page 378 376 STARTING AND OPERATING • The vehicle shifted into PARK from a different gear. WARNING! (Continued) • If the vehicle is in any gear other than REVERSE, press pedestrians, animals, other vehicles, obstructions, or the “X” button. blind spots before backing up. You are responsible for •...
Page 379: Refueling The Vehicle
STARTING AND OPERATING 377 REFUELING THE VEHICLE 1. Press the fuel filler door release button (located in the driver’s door in the upper map pocket). Instrument Cluster Message NOTE: • After pushing the release button you will have 20 minutes to fuel the vehicle, beyond 20 minutes you Fuel Filler Door Release Switch will need to press the release button again.
Page 380 378 STARTING AND OPERATING 3. Open the fuel filler door by pressing in the rear area of 6. Fill the vehicle with fuel, when the fuel nozzle “clicks” fuel door. or shuts off the fuel tank is full. 7. Wait five seconds before removing the fuel nozzle to allow fuel to drain from nozzle.
Page 381 STARTING AND OPERATING 379 Emergency Fuel Door Release WARNING! 1. Access the storage bin located behind the rear cargo trim • Never have any smoking materials lit in or near the panel. vehicle when the fuel door is open or the tank is 2.
Page 382: Vehicle Loading
380 STARTING AND OPERATING 3. Pull the fuel door emergency release to open the fuel VEHICLE LOADING door. Certification Label As required by National Highway Traffic Safety Adminis- tration regulations, your vehicle has a certification label affixed to the driver’s side door or pillar. This label contains the month and year of manufacture, Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR) front and rear, and Vehicle Identification...
Page 383 STARTING AND OPERATING 381 Gross Axle Weight Rating (GAWR) Curb Weight The GAWR is the maximum permissible load on the front The curb weight of a vehicle is defined as the total weight and rear axles. The load must be distributed in the cargo of the vehicle with all fluids, including vehicle fuel, at full area so that the GAWR of each axle is not exceeded.
Page 384: Trailer Towing
382 STARTING AND OPERATING Improper weight distributions can have an adverse effect CAUTION! (Continued) on the way your vehicle steers and handles and the way your vehicle can break, or it can change the way your the brakes operate. vehicle handles. This could cause you to lose control. Also overloading can shorten the life of your vehicle.
Page 385: Recreational Towing - All Models
STARTING AND OPERATING 383 NOTE: CAUTION! (Continued) • To avoid inadvertent Electric Park Brake engagement, • Ensure that the Electric Park Brake is released, and you must ensure that the Auto Park Brake feature is remains released, while being towed. disabled before towing this vehicle.
Page 386: Driving Tips
384 STARTING AND OPERATING 7. Turn the ignition to the ON/RUN position, but do not WARNING! start the vehicle. Rapid acceleration on slippery surfaces is dangerous. 8. Press and hold the brake pedal. Unequal traction can cause sudden pulling of the front 9.
Page 387: Driving Through Water
STARTING AND OPERATING 385 • Maintain sufficient distance between your vehicle and Shallow Standing Water the vehicle in front of you to avoid a collision in a Although your vehicle is capable of driving through shal- sudden stop. low standing water, consider the following Cautions and Warnings before doing so.
Page 388 386 STARTING AND OPERATING CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water.
Page 389 IN CASE OF EMERGENCY CONTENTS HAZARD WARNING FLASHERS ... .388 TIRE SERVICE KIT — IF EQUIPPED ..418 ASSIST AND SOS MIRROR — IF EQUIPPED ..388 JUMP STARTING .
Page 390: Hazard Warning Flashers
388 IN CASE OF EMERGENCY HAZARD WARNING FLASHERS ASSIST AND SOS MIRROR — IF EQUIPPED The Hazard Warning flasher switch is located in the lower center area of the instrument panel. Push the switch to turn on the Hazard Warning flasher.
Page 391 IN CASE OF EMERGENCY 389 • Roadside Assistance – If you get a flat tire, or need a tow, WARNING! just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know ALWAYS obey traffic laws and pay attention to the what vehicle you’re driving and its location.
Page 392 390 IN CASE OF EMERGENCY 3. Once a connection between the vehicle and a SOS NOTE: operator is made, the SOS Call system may transmit the • Your vehicle may be transmitting data as authorized following important vehicle information to a SOS op- by the subscriber.
Page 393 IN CASE OF EMERGENCY 391 WARNING! (Continued) WARNING! (Continued) • Modifications to any part of the SOS Call system Emergency Services Agent. All occupants should exit the vehicle immediately and move to a safe location. could cause the air bag system to fail when you need •...
Page 394 392 IN CASE OF EMERGENCY • The vehicle battery loses power or becomes discon- WARNING! nected during a vehicle crash. • Ignoring the Rearview Mirror light could mean you • LTE (voice/data) or 4G (data) network and/or Global will not have SOS Call services. If the Rearview Positioning Satellite signals are unavailable or ob- Mirror light is illuminated, have your authorized structed.
Page 395 IN CASE OF EMERGENCY 393 NOTE: This device may not cause harmful interference, and (2) this device must accept any interference received, includ- • Your vehicle may be transmitting data as authorized by ing interference that may cause undesired operation. the subscriber.
Page 396: Bulb Replacement
394 IN CASE OF EMERGENCY BULB REPLACEMENT Replacement Bulbs Interior Bulbs Lamps Bulb Number Center & Rear Dome Lamp LED (Serviced At Authorized Dealer) Center & Rear Reading Lamps LED (Serviced At Authorized Dealer) Front Door Courtesy Lamp LED (Serviced At Authorized Dealer) Front Header Reading Lamps –...
Page 397 IN CASE OF EMERGENCY 395 Exterior Bulbs Lamps Bulb Number Halogen Headlamp Projector Halogen Low Beam - 9005HL+ High Beams - 9005LL Dedicated Daytime Running Lamp (If Equipped) LED (Serviced at Authorized Dealer) Front Turn Signal Lamp PWY24WNA Side Marker Lamp Front Park Lamp LED (Serviced At Authorized Dealer) Front Fog Lamp...
Page 398: Replacing Exterior Bulbs
396 IN CASE OF EMERGENCY Replacing Exterior Bulbs Halogen Headlamps 1. Reach behind the headlamp housing to access the headlamp bulb cap. 2. Firmly grasp the headlamp bulb cap and rotate it counterclockwise to unlock it. Headlamp Bulb Socket 4. Disconnect the bulb from the electrical connector and then connect the replacement bulb.
Page 399 IN CASE OF EMERGENCY 397 Front Turn Signal Lamp 1. Open the hood. 2. Twist the front turn signal lamp socket assembly coun- terclockwise, and then remove the front turn signal lamp assembly from the lamp housing. Headlamp Bulb CAUTION! Do not touch the new bulb with your fingers.
Page 400 398 IN CASE OF EMERGENCY Front And Rear Side Marker Lamps 1. Remove the three fasteners from the inner wheel liner and carefully peel back liner for access. Front Side Marker Lamp Bulb Removal 3. Remove bulb from the front side marker lamp socket and replace with a new bulb.
Page 401 IN CASE OF EMERGENCY 399 Front Fog Lamp — Halogen CAUTION! 1. Remove fasteners from inner wheel liner and carefully Do not touch the new bulb with your fingers. Oil peel back liner for access. contamination will severely shorten bulb life. If the 2.
Page 402: Fuses
400 IN CASE OF EMERGENCY Rear Bodyside Mounted Taillamps FUSES 1. Raise the liftgate. WARNING! 2. Remove two torx head screws on bodyside lamp using • When replacing a blown fuse, always use an appro- a T30 screwdriver. priate replacement fuse with the same amp rating as 3.
Page 403: General Information
IN CASE OF EMERGENCY 401 General Information The fuses protect electrical systems against excessive cur- rent. When a device does not work, you must check the fuse element inside the blade fuse for a break/melt. Also, please be aware that when using power outlets for extended periods of time with the vehicle off may result in vehicle battery discharge.
Page 404: Fuse Location
402 IN CASE OF EMERGENCY Fuse Location After service is done, secure the cover with its two locks. The fuses are grouped into controllers located in the engine compartment. Underhood Fuses The Power Distribution Center is located in the engine compartment near the battery.
Page 405 IN CASE OF EMERGENCY 403 Cavity Cartridge Fuse Blade Fuse Description – 15 Amp Blue High Temp Aux Pump & HV Electric Coolant Htr Enable – 15 Amp Blue ELCM / FTIV – 5 Amp Tan Battery Sensor (IBS) – –...
Page 406 404 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F25A – 10 Amp Red Handsfree (Lt & Rt Rear Door Release Module) F25B – Active Grill Shutter 40 Amp Green – Front HVAC Blower Motor 25 Amp Clear –...
Page 407 IN CASE OF EMERGENCY 405 Cavity Cartridge Fuse Blade Fuse Description – – Not Used 25 Amp Clear – Rear HVAC Blower Motor 20 Amp Blue – Trans Oil Pump – – Not Used – – Not Used – 20 Amp Yellow Fuel Pump Motor 30 Amp Pink –...
Page 408 406 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F55A – 15 Amp Blue RF Hub/KIN/ESL - BUX Only F55B – DVD / VRM F56A – 10 Amp Red FRT. & RR HVAC CTRL/ OCM / ESL F56B –...
Page 409 IN CASE OF EMERGENCY 407 Cavity Cartridge Fuse Blade Fuse Description – 10 Amp Red HALF / PTS / Drivers As- sist System Module (DASM) – – Not Used F69A – 15 Amp Blue BPCM F69B – BPCM (Redundant) – 5 Amp Tan –...
Page 410 408 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description F77A – 10 Amp Red Rear Entertainment / Me- dia HUB / 3RD & 2ND Row USB CHRG / Vacuum Cleaner SW Backlight / 3RD Row Recliner SW Backlight / 2ND Row Stow N Go SW Backlight / LT&RT Sliding Door Back- light...
Page 411 IN CASE OF EMERGENCY 409 Cavity Cartridge Fuse Blade Fuse Description – – Not Used – 20 Amp Yellow Cigar Lighter – – Not Used – – Not Used – 20 Amp Yellow Front Heated Seats – 20 Amp Yellow Rear Heated Seats –...
Page 412: Jacking And Tire Changing
410 IN CASE OF EMERGENCY Cavity Cartridge Fuse Blade Fuse Description – – Not Used F100A – 10 Amp Red QVPM F100B – Rr Camera / LBSS / RBSS / CVPM / Humidity Snsr / In Car Temp Snsr Circuit Breakers 25 Amp Power Seat (Driver) 25 Amp...
Page 413: Preparations For Jacking
IN CASE OF EMERGENCY 411 Preparations For Jacking Jacking Instructions 1. Park the vehicle on a firm, level surface. Avoid ice or WARNING! slippery areas. Carefully follow these tire changing warnings to help WARNING! prevent personal injury or damage to your vehicle: •...
Page 414 412 IN CASE OF EMERGENCY 2. There are two jack engagement locations on each side of the vehicle body indicated by the triangular lift point symbol on the sill molding. Do not raise the vehicle until you are sure the jack is fully engaged. Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on...
Page 415 IN CASE OF EMERGENCY 413 WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Page 416 414 IN CASE OF EMERGENCY Rear Jacking Location Rear Jack Engaged CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated. 3. Raise the jack until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged.
Page 417 IN CASE OF EMERGENCY 415 4. Raise the vehicle by using the jack. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to remove the desired tire. Mini- mum tire lift provides maximum stability. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
Page 418: Road Tire Installation
416 IN CASE OF EMERGENCY nut has been tightened twice. Refer to “Torque Specifi- cations” in “Technical Specifications” for proper wheel lug nut torque. If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station.
Page 419 IN CASE OF EMERGENCY 417 2. Install the remaining lug nuts with the cone shaped end WARNING! of the nut toward the wheel. Lightly tighten the lug nuts. To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has WARNING! been lowered.
Page 420: Tire Service Kit - If Equipped
418 IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED Your vehicle may be equipped with a Tire Service Kit. Small punctures up to 1/4 inch (6 mm) in the tire tread can be sealed with Tire Service Kit. Foreign objects (e.g., screws or nails) should not be removed from the tire.
Page 421 IN CASE OF EMERGENCY 419 Tire Service Kit And Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob and turn to this position for air pump operation only.
Page 422 420 IN CASE OF EMERGENCY • The Sealant Bottle is a one tire application use and needs Using The Power Button to be replaced after each use. Always replace these Push and release the Power Button once components immediately at your original equipment to turn On the Tire Service Kit.
Page 423 IN CASE OF EMERGENCY 421 and make sure the Mode Select Knob is in the Air Mode WARNING! (Continued) when inflating such items to avoid injecting sealant into • Keep Tire Service Kit away from open flames or heat them. source.
Page 424 422 IN CASE OF EMERGENCY Sealing A Tire With Tire Service Kit 3. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose Whenever You Stop To Use Tire Service Kit: onto the valve stem.
Page 425 IN CASE OF EMERGENCY 423 Injecting Tire Service Kit Sealant Into The Deflated Tire: NOTE: Sealant may leak out through the puncture in the tire. 1. Always start the vehicle before turning ON the Tire Service Kit. If the sealant (white fluid) does not flow within 0 – 10 seconds through the Sealant Hose: 1.
Page 426 424 IN CASE OF EMERGENCY If the sealant (white fluid) does flow through the Sealant If the tire inflates to the recommended pressure or is at Hose: least 26 psi (1.8 Bar) pressure within 15 minutes: 1. Continue to operate the pump until sealant is no longer NOTE: If the tire becomes over-inflated, push the Deflation flowing through hose (typically takes Button to reduce the tire pressure to the recommended...
Page 427 IN CASE OF EMERGENCY 425 Drive Vehicle: 2. Place the Tire Service Kit flat on the ground next to the deflated tire. Immediately after injecting sealant and inflating the tire, drive the vehicle 5 3. Remove the cap from the valve stem, and then screw miles (8 km) or 10 minutes to ensure the fitting at the end of the Sealant distribution of the Tire Service Kit Seal-...
Page 428 426 IN CASE OF EMERGENCY 5. Uncoil the Hose and screw the fitting at the end of the If the tire pressure is 19 psi (1.3 Bar) or higher: hose onto the valve stem. 1. Push the Power Button to turn on Tire Service Kit and inflate the tire to the cold tire inflation pressure found on the tire and load- ing information label located in the...
Page 429 IN CASE OF EMERGENCY 427 NOTE: When having the tire serviced, advise the autho- 3. Remove the bottle cover. rized dealer or service center that the tire has been sealed using the Tire Service Kit. Sealant Bottle Replacement: 1. Unwrap the power cord. 2.
Page 430 428 IN CASE OF EMERGENCY 4. Rotate the bottle up beyond vertical to release. 5. Pull the bottle away from the Compressor. Rotate The Bottle Up Remove The Bottle NOTE: • For sealant bottle installation, follow these steps reverse order. •...
Page 431: Jump Starting
IN CASE OF EMERGENCY 429 JUMP STARTING Carefully move the vehicle to a level 1 or Level 2 charge location. While the vehicle is being moved, the external The vehicle requires its 12V battery power to turn-on the 12V power must remained connected to the vehicle vehicle’s high voltage battery.
Page 432: Preparations For Jump Start
430 IN CASE OF EMERGENCY WARNING! Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, alternator or electrical system may occur.
Page 433: Jump Starting Procedure
IN CASE OF EMERGENCY 431 Jump Starting Procedure WARNING! (Continued) • Remove any jewelry such as rings, watches and WARNING! bracelets that could make an inadvertent electrical Failure to follow this jump starting procedure could contact. • Keep open flames or sparks away from the battery. result in personal injury or property damage due to battery explosion.
Page 434 432 IN CASE OF EMERGENCY 4. Connect the opposite end of the negative (-) jumper 2. Disconnect the opposite end of the negative (-) jumper cable to the negative post near the windshield cowl cable from the negative (-) post of the booster battery. (exposed metal post of the discharged vehicle).
Page 435: Refueling In Emergency
IN CASE OF EMERGENCY 433 REFUELING IN EMERGENCY IF YOUR ENGINE OVERHEATS The funnel for the Cap-Less Fuel System is located with the In any of the following situations, you can reduce the spare tire (if equipped) or in the upper storage bin. If your potential for overheating by taking the appropriate action.
Page 436: Freeing A Stuck Vehicle
434 IN CASE OF EMERGENCY NOTE: Push the ESC Off switch to place the Electronic CAUTION! Stability Control (ESC) system in Partial Off mode, before rocking the vehicle. Refer to “Electronic Brake Control Driving with a hot cooling system could damage your System”...
Page 437: Towing A Disabled Vehicle
IN CASE OF EMERGENCY 435 TOWING A DISABLED VEHICLE CAUTION! (Continued) This section describes procedures for towing a disabled • Spinning the wheels too fast may lead to transmis- vehicle using a commercial towing service. sion overheating and failure. It can also damage the tires.
Page 438 436 IN CASE OF EMERGENCY NOTE: CAUTION! • You must ensure that the Auto Park Brake feature is Towing this vehicle in violation of the above require- disabled before towing this vehicle (if rear wheels are on ments can cause severe engine and/or transmission the ground), to avoid inadvertent Electric Park Brake damage.
Page 439 IN CASE OF EMERGENCY 437 CAUTION! (Continued) • Be applied parallel to the center line of the length of the vehicle. • Not be an abrupt acceleration. If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the ON/RUN mode, not the ACC mode.
Page 440: Enhanced Accident Response System (Ears)
438 IN CASE OF EMERGENCY EVENT DATA RECORDER (EDR) CAUTION! This vehicle is equipped with an Event Data Recorder • Do not use sling-type equipment when towing. Ve- (EDR). The main purpose of an EDR is to record data that hicle damage may occur.
Page 441 SERVICING AND MAINTENANCE CONTENTS ▫ Windshield Wiper Blades ....457 SCHEDULED SERVICING ....441 ▫...
Page 442 440 SERVICING AND MAINTENANCE ▫ Body And Underbody Maintenance ..498 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....494 ▫...
Page 443: Scheduled Servicing
SERVICING AND MAINTENANCE 441 SCHEDULED SERVICING Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If a Your vehicle is equipped with an automatic oil change scheduled oil change is performed by someone other than indicator system.
Page 444: Maintenance Plan
442 SERVICING AND MAINTENANCE • Check function of all interior and exterior lights. Once A Month Or Before A Long Trip: • Check engine oil level. Maintenance Plan • Check windshield washer fluid level. Required Maintenance Intervals • Check tire pressure and look for unusual wear or Refer to the maintenance schedules on the following page damage.
Page 445 SERVICING AND MAINTENANCE 443 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive belt, tensioner, idler pul- ley, and replace if necessary.
Page 446 444 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace air conditioning/cabin air filter. Replace spark plugs.(**) Flush and replace the engine, power electronics, and battery coolant at 10 years or 150,000 miles (240,000 km), whichever comes first.(***) Inspect and replace PCV valve if necessary.
Page 447: Heavy Duty Use Of The Vehicle
SERVICING AND MAINTENANCE 445 Heavy Duty Use Of The Vehicle WARNING! Change Engine Oil at 4,000 miles (6,500 km) if the vehicle • You can be badly injured working on or around a is operated in a dusty and off road environment. This type motor vehicle.
Page 448: Engine Compartment - Hybrid
446 SERVICING AND MAINTENANCE ENGINE COMPARTMENT — HYBRID 1 — Battery Coolant Reservoir* 6 — Power Distribution Center (Fuses) 2 — Engine Coolant Reservoir 7 — Engine Air Cleaner 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 449: Checking Oil Level
SERVICING AND MAINTENANCE 447 Checking Oil Level Adding Washer Fluid To assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut OFF.
Page 450: Maintenance-Free Battery
448 SERVICING AND MAINTENANCE To prevent freeze-up of your windshield washer system in WARNING! (Continued) cold weather, select a solution or mixture that meets or large amounts of water. Refer to “Jump Starting exceeds the temperature range of your climate. This rating Procedure”...
Page 451: Dealer Service
SERVICING AND MAINTENANCE 449 Engine Oil CAUTION! (Continued) Change Engine Oil • If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before The oil change indicator system will remind you that it is connecting the charger to the battery.
Page 452 450 SERVICING AND MAINTENANCE American Petroleum Institute (API) Engine Oil The engine oil filler cap also shows the recommended Identification Symbol engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Compart- ment”...
Page 453: Engine Oil Filter
SERVICING AND MAINTENANCE 451 Disposing Of Used Engine Oil And Oil Filters NOTE: Be sure to follow the “Severe Duty Conditions” maintenance interval if applicable. Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, WARNING! indiscriminately discarded, can present a problem to the environment.
Page 454: Accessory Drive Belt Inspection
452 SERVICING AND MAINTENANCE Accessory Drive Belt Inspection WARNING! • Do not attempt to inspect an accessory drive belt with vehicle running. • When working near the radiator cooling fan, discon- nect the fan motor lead. The fan is temperature controlled and can start at any time regardless of ignition mode.
Page 455: Air Conditioner Maintenance
SERVICING AND MAINTENANCE 453 Some conditions can be caused by a faulty component such WARNING! (Continued) as a belt pulley. Belt pulleys should be carefully inspected damage to the system, adding refrigerant or any for damage and proper alignment. repair requiring lines to be disconnected should be Belt replacement on some models requires the use of done by an experienced technician.
Page 456 454 SERVICING AND MAINTENANCE Air Conditioning Filter Replacement (Cabin Air Filter) Refer to “Scheduled Servicing” in this section for the proper maintenance intervals. WARNING! Do not remove the cabin air filter while the vehicle is running, or while the ignition is in the ACC or ON/ RUN mode.
Page 457 SERVICING AND MAINTENANCE 455 3. There are glove compartment travel stops on either side 5. Pry up the lid of each individual compartment snap, of the glove compartment door. To release them, push and detach it from the rest of the snap. There is a small inward on each travel stop, and pull the glove compart- space on the side of each snap to use for separating the ment door down until the travel stops pass clear of their...
Page 458: Body Lubrication
456 SERVICING AND MAINTENANCE 7. Remove the filter cover by prying back each of the stops. Finally, pull the glove compartment tension retaining tabs from their hooking points, and then tether clip down and slide it back into the slot on the pulling out the filter cover to expose the cabin air filter.
Page 459: Windshield Wiper Blades
SERVICING AND MAINTENANCE 457 Windshield Wiper Blades The wiper blades and wiper arms should be inspected periodically, not just when wiper performance problems Clean the rubber edges of the wiper blades and the are experienced. This inspection should include the follow- windshield periodically with a sponge or soft cloth and a ing points: mild nonabrasive cleaner.
Page 460 458 SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation CAUTION! Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged. 1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position.
Page 461 SERVICING AND MAINTENANCE 459 Wiper Blade With Release Tab In Unlocked Position Wiper Blade Removed From Wiper Arm 1 — Wiper Blade 1 — Wiper Blade 2 — Release Tab 2 — Wiper Arm 3 — Wiper Arm 3 — Release Tab 3.
Page 462 460 SERVICING AND MAINTENANCE Installing The Front Wipers NOTE: The rear wiper arm cannot be fully raised off the glass unless the wiper arm pivot cap is unsnapped first. 1. Lift the wiper arm off of the glass, until the wiper arm is Attempting to fully raise the rear wiper arm without in the full up position.
Page 463 SERVICING AND MAINTENANCE 461 NOTE: Resistance will be accompanied by an audible snap. 4. Still grasping the bottom end of the wiper blade, move the wiper blade upward and away from the wiper arm to disengage. Wiper Blade In Folded Out Position 1 —...
Page 464: Exhaust System
462 SERVICING AND MAINTENANCE Installing The Rear Wiper have an authorized technician inspect the complete ex- haust system and adjacent body areas for broken, dam- 1. Lift the rear wiper arm pivot cap away from the glass to aged, deteriorated, or mispositioned parts. Open seams or allow the rear wiper blade to be raised off of the glass.
Page 465: Cooling System
SERVICING AND MAINTENANCE 463 In unusual situations involving grossly malfunctioning CAUTION! engine operation, a scorching odor may suggest severe and • The catalytic converter requires the use of unleaded abnormal catalyst overheating. If this occurs, stop the vehicle, turn off the engine and allow it to cool. Service, fuel only.
Page 466 464 SERVICING AND MAINTENANCE This vehicle is equipped with an electric cooling fan WARNING! (Continued) mounted behind the radiator that starts automatically, and • You or others can be badly burned by hot engine may start at any time. Your vehicle may determine the fan coolant (antifreeze) or steam from your radiator.
Page 467 SERVICING AND MAINTENANCE 465 coolant recovery bottle and radiator. Inspect the entire cooling systems. If the coolant level of the battery coolant system for leaks. DO NOT REMOVE THE COOLANT system is low, the wrench warning light will be illuminated PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT.
Page 468 466 SERVICING AND MAINTENANCE • We recommend using Mopar Antifreeze/Coolant 10 CAUTION! (Continued) Year/150,000 Mile Formula OAT (Organic Additive • Do not use water alone or alcohol-based engine Technology) that meets the requirements of FCA Mate- coolant (antifreeze) products. Do not use additional rial Standard MS.90032.
Page 469 SERVICING AND MAINTENANCE 467 NOTE: WARNING! • Mixing coolant (antifreeze) types is not recommended • Do not open hot engine cooling system. Never add and can result in cooling system damage. If HOAT and engine coolant (antifreeze) when the engine is over- OAT coolant are mixed in an emergency, have a autho- heated.
Page 470 468 SERVICING AND MAINTENANCE Coolant Level If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be The coolant expansion bottle provides a quick visual safely driven. The vapor will soon dissipate. method for determining that the coolant level is adequate.
Page 471: Brake System
SERVICING AND MAINTENANCE 469 • Keep the front of the radiator clean. If your vehicle is to the “Maintenance Plan” in this section for the proper equipped with air conditioning, keep the front of the maintenance intervals. condenser clean. WARNING! •...
Page 472: Automatic Transmission
470 SERVICING AND MAINTENANCE Use only manufacturer’s recommended brake fluid. Refer WARNING! (Continued) to “Fluids And Lubricants” in “Technical Specifications” • Overfilling the brake fluid reservoir can result in for further information. spilling brake fluid on hot engine parts, causing the brake fluid to catch fire.
Page 473 SERVICING AND MAINTENANCE 471 Fluid Level Check CAUTION! The fluid level is preset at the factory and does not require Using a transmission fluid other than the manufactur- adjustment under normal operating conditions. Routine er’s recommended fluid may cause deterioration in fluid level checks are not required;...
Page 474: Raising The Vehicle
472 SERVICING AND MAINTENANCE Fluid Changes Tire Markings Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication for the life of the vehicle. Routine fluid changes are not required. However, change the fluid if it becomes contaminated (with water, etc.), or if the transmission is disassembled for any reason.
Page 475 SERVICING AND MAINTENANCE 473 NOTE: tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the • P (Passenger) — Metric tire sizing is based on U.S. size designation. Example: LT235/85R16. design standards.
Page 476 474 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 477 SERVICING AND MAINTENANCE 475 EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under cer- tain operating conditions –...
Page 478 476 SERVICING AND MAINTENANCE EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 479 SERVICING AND MAINTENANCE 477 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 480 478 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
Page 481 SERVICING AND MAINTENANCE 479 Tire And Loading Information Placard Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard in “Vehicle Loading”...
Page 482 480 SERVICING AND MAINTENANCE Steps For Determining Correct Load Limit— this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or Metric Example For Load Limit XXX lbs.”...
Page 483 SERVICING AND MAINTENANCE 481 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them.
Page 484: Tires - General Information
482 SERVICING AND MAINTENANCE Tires — General Information WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and vehicle control. satisfactory operation of your vehicle.
Page 485 SERVICING AND MAINTENANCE 483 Fuel Economy CAUTION! Underinflated tires will increase tire rolling resistance After inspecting or adjusting the tire pressure, always resulting in higher fuel consumption. reinstall the valve stem cap. This will prevent moisture Tread Wear and dirt from entering the valve stem, which could damage the valve stem.
Page 486 484 SERVICING AND MAINTENANCE pressure should be increased by 3 psi (21 kPa), which Radial Ply Tires equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. WARNING! Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) Combining radial ply tires with other types of tires on during operation.
Page 487 SERVICING AND MAINTENANCE 485 Run Flat Tires — If Equipped WARNING! Run Flat tires allow you the capability to drive 50 miles Fast spinning tires can be dangerous. Forces generated (80 km) at 50 mph (80 km/h) after a rapid loss of inflation by excessive wheel speeds may cause tire damage or pressure.
Page 488 486 SERVICING AND MAINTENANCE Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style. • Tire pressure - Improper cold tire inflation pressures can cause uneven wear patterns to develop across the tire tread.
Page 489 SERVICING AND MAINTENANCE 487 Keep dismounted tires in a cool, dry place with as little It is recommended you contact your authorized tire dealer exposure to light as possible. Protect tires from contact with or original equipment dealer with any questions you may oil, grease, and gasoline.
Page 490: Tire Types
488 SERVICING AND MAINTENANCE Summer Or Three Season Tires — If Equipped WARNING! (Continued) Summer tires provide traction in both wet and dry condi- • Failure to equip your vehicle with tires having ad- tions, and are not intended to be driven in snow or on ice. equate speed capability can result in sudden tire If your vehicle is equipped with Summer tires, be aware failure and loss of vehicle control.
Page 491: Spare Tires - If Equipped
SERVICING AND MAINTENANCE 489 Snow Tires Spare Tires — If Equipped Some areas of the country require the use of snow tires NOTE: For vehicles equipped with Tire Service Kit instead during the Winter. Snow tires can be identified by a of a spare tire, please refer to “Tire Service Kit”...
Page 492 490 SERVICING AND MAINTENANCE Compact Spare Tire — If Equipped WARNING! (Continued) The compact spare is for temporary emergency use only. You more than 50 mph (80 km/h). Temporary use spares can identify if your vehicle is equipped with a compact spare have limited tread life.
Page 493 SERVICING AND MAINTENANCE 491 Do not install a wheel cover or attempt to mount a Limited Use Spare — If Equipped conventional tire on the collapsible spare wheel, since the The limited use spare tire is for temporary emergency use wheel is designed specifically for the collapsible spare tire.
Page 494: Wheel And Wheel Trim Care
492 SERVICING AND MAINTENANCE Wheel And Wheel Trim Care When cleaning extremely dirty wheels including excessive brake dust, care must be taken in the selection of tire and All wheels and wheel trim, especially aluminum and wheel cleaning chemicals and equipment to prevent dam- chrome plated wheels, should be cleaned regularly using age to the wheels.
Page 495: Tire Chains (Traction Devices)
SERVICING AND MAINTENANCE 493 Dark Vapor Chrome, Black Satin Chrome, or Low Gloss WARNING! Clear Coat Wheels Using tires of different size and type (M+S, Snow) CAUTION! between front and rear axles can cause unpredictable handling. You could lose control and have a collision. If your vehicle is equipped with these specialty wheels, DO NOT USE wheel cleaners, abrasives, or CAUTION!
Page 496: Tire Rotation Recommendations
494 SERVICING AND MAINTENANCE The suggested rotation method is the “forward cross” CAUTION! (Continued) shown in the following diagram. This rotation pattern does • Observe the traction device manufacturer’s instruc- not apply to some directional tires that must not be tions on the method of installation, operating speed, reversed.
Page 497: Treadwear
SERVICING AND MAINTENANCE 495 All passenger vehicle tires must conform to Federal WARNING! safety requirements in addition to these grades. The traction grade assigned to this tire is based on Treadwear straight-ahead braking traction tests, and does not The Treadwear grade is a comparative rating, based on include acceleration, cornering, hydroplaning, or the wear rate of the tire when tested under controlled peak traction characteristics.
Page 498: Storing The Vehicle
496 SERVICING AND MAINTENANCE • Clean and protect polished metal parts by applying WARNING! protective waxes. The temperature grade for this tire is established for • Apply talcum powder to the front and rear wiper blades a tire that is properly inflated and not overloaded. and leave raised from the glass.
Page 499: Bodywork
SERVICING AND MAINTENANCE 497 NOTE: The hybrid has feature of periodic wake-up that corrosive to the metal in your vehicle. Outside parking, occurs every 21 days. This feature charges the 12V battery which exposes your vehicle to airborne contaminants, road from the high voltage battery.
Page 500: Body And Underbody Maintenance
498 SERVICING AND MAINTENANCE • Use a high quality cleaner wax, such as Mopar Cleaner Body And Underbody Maintenance Wax to remove road film, stains and to protect your Cleaning Headlights paint finish. Take care never to scratch the paint. Your vehicle is equipped with plastic headlights and fog •...
Page 501: Interiors
SERVICING AND MAINTENANCE 499 • If you detect any stone chips or scratches in the paint, WARNING! touch them up immediately. The cost of such repairs is considered the responsibility of the owner. Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed •...
Page 502: Plastic And Coated Parts
500 SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster Lenses WARNING! The lenses in front of the instruments in this vehicle are A frayed or torn belt could rip apart in a collision and molded in clear plastic. When cleaning the lenses, care leave you with no protection.
Page 503: Glass Surfaces
SERVICING AND MAINTENANCE 501 NOTE: If equipped with light colored leather, it tends to show any foreign material, dirt, and fabric dye transfer more so than darker colors. The leather is designed for easy cleaning, and FCA recommends Mopar total care leather cleaner applied on a cloth to clean the leather seats as needed.
Page 505 TECHNICAL SPECIFICATIONS CONTENTS ▫ Do Not Use E-85 In Non-Flex Fuel Vehicles ..507 IDENTIFICATION DATA....504 ▫ Vehicle Identification Number ... . .504 ▫...
Page 506: Identification Data
504 TECHNICAL SPECIFICATIONS IDENTIFICATION DATA BRAKE SYSTEM Your vehicle is equipped with dual hydraulic brake sys- Vehicle Identification Number tems. If either of the two hydraulic systems loses normal The Vehicle Identification Number (VIN) is on the left front capability, the remaining system will still function. How- corner of the instrument panel and is visible from outside ever, there will be some loss of overall braking effective- of the vehicle through the windshield.
Page 507: Torque Specifications
TECHNICAL SPECIFICATIONS 505 Torque Specifications Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is Nut/Bolt **Lug Nut/Bolt Nut/Bolt fully engaged on the lug nut/bolt (do not insert it half- Torque Size Socket Size...
Page 508: Fuel Requirements
506 TECHNICAL SPECIFICATIONS of gasoline with an octane number lower than 87 can cause WARNING! engine failure and may void or not be covered by the New Vehicle Limited Warranty. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been Poor quality gasoline can cause problems such as hard lowered.
Page 509: Gasoline/Oxygenate Blends
TECHNICAL SPECIFICATIONS 507 Designated TOP TIER Detergent Gaso- CAUTION! (Continued) line contains a higher level of detergents cause emissions to exceed the applicable standard, to further aide in minimizing engine and/or cause the “Malfunction Indicator Light” to and fuel system deposits. When avail- illuminate.
Page 510: Cng And Lp Fuel System Modifications
508 TECHNICAL SPECIFICATIONS • Poor cold start and cold drivability. Fuel System Cautions • Increased risk for fuel system component corrosion. CAUTION! CNG And LP Fuel System Modifications Follow these guidelines to maintain your vehicle’s Modifications that allow the engine to run on compressed performance: natural gas (CNG) or liquid propane (LP) may result in •...
Page 511: Carbon Monoxide Warnings
TECHNICAL SPECIFICATIONS 509 NOTE: Intentional tampering with the emissions control WARNING! (Continued) system can result in civil penalties being assessed against kill. Never run the engine in a closed area, such as a you. garage, and never sit in a parked vehicle with the Carbon Monoxide Warnings engine running for an extended period.
Page 512 510 TECHNICAL SPECIFICATIONS U.S. Metric Cooling System* 3.6 Liter Engine Coolant (Mopar 14.5 Quarts 13.7 Liters Antifreeze/Engine Coolant 10 Year/ 150,000 Mile Formula with deionized, or distilled water for proper corro- sion protection) Battery Coolant (Contact your autho- 5 Quarts 4.7 Liters rized dealer for service) Power Electronics Coolant (Contact...
Page 513: Fluids And Lubricants
TECHNICAL SPECIFICATIONS 511 FLUIDS AND LUBRICANTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Tech- nology) with deionized, or distilled water for proper cor- rosion protection or equivalent meeting the requirements of FCA Material Standard MS.90032.
Page 514 512 TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part Engine Oil Filter We recommend you use a Mopar Engine Oil Filter. Spark Plugs We recommend you use Mopar Spark Plugs. Fuel Selection 87 Octane, 0-15% Ethanol (Do not use E-85). CAUTION! CAUTION! (Continued) and refilled with fresh OAT coolant (conforming to...
Page 515: Chassis
TECHNICAL SPECIFICATIONS 513 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmis- sion Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake Master Cylinder We recommend you use Mopar DOT 3 Brake Fluid, SAE J1703 should be used.
Page 517 MULTIMEDIA CONTENTS ▫ Uconnect Theater Controls ....547 UCONNECT RADIOS ....517 ▫...
Page 518 516 MULTIMEDIA ▫ Play Video Games ..... .562 ▫ Basic Voice Commands ....580 ▫...
Page 519: Uconnect Radios
MULTIMEDIA UCONNECT RADIOS For detailed information about your Uconnect radio, refer to your Uconnect Owner’s Manual Supplement. NOTE: Uconnect screen images are for illustration pur- poses only and may not reflect exact software for your vehicle. PERSONALIZED MENU BAR The Uconnect features and services in the main menu bar are easily changed for your convenience.
Page 520: Cybersecurity
518 MULTIMEDIA CYBERSECURITY WARNING! Your vehicle may be a connected vehicle and may be • It is not possible to know or to predict all of the equipped with both wired and wireless networks. These possible outcomes if your vehicle’s systems are networks allow your vehicle to send and receive informa- breached.
Page 521: Uconnect Settings
MULTIMEDIA NOTE: UCONNECT SETTINGS • FCA US LLC or your dealer may contact you directly The Uconnect system uses a combination of buttons on the regarding software updates. touchscreen and/or buttons on the faceplate located on the center of the instrument panel that allow you to access and •...
Page 522: Customer Programmable Features - Uconnect 4C/4C Nav Settings
520 MULTIMEDIA Customer Programmable Features — Uconnect NOTE: 4C/4C NAV Settings • Only one touchscreen area may be selected at a time. • Depending on the vehicles options, feature settings may vary. When making a selection, press the button on the touch- screen to enter the desired mode.
Page 523 MULTIMEDIA After pressing the “KeySense” button on the touchscreen, and entering the KeySense PIN, the following settings will be available: Setting Name Selectable Options Forward Collision Sensi- Near Medium tivity Forward Collision Warn- ing Active Braking NOTE: When the “Forward Collision Warning Active Braking” feature is selected, the ABA applies additional brake pressure when the driver requests insufficient brake pressure to avoid a potential frontal collision.
Page 524 522 MULTIMEDIA Setting Name Selectable Options Front ParkSense Volume Medium High Rear ParkSense Volume Medium High Rear ParkSense Braking Assist NOTE: When the “Rear ParkSense Braking Assist” feature is selected, the park assist system will detect objects located be- hind the vehicle and utilize autonomous braking to stop the vehicle. Blind Spot Alert —...
Page 525 MULTIMEDIA Setting Name Selectable Options Maximum Vehicle Speed NOTE: The “Maximum Vehicle Speed” feature can be set to 65, 70, 75, 80, or 85 mph (90, 95, 100, 105, 110 km/h). SiriusXM Setup Channel Skip Subscription Information NOTE: SiriusXM can be programmed to skip channels. To make your selection, press the “Channel Skip” button on the touchscreen, select the channels you would like to skip.
Page 526 524 MULTIMEDIA Language After pressing the “Language” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Language NOTE: When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa- ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped).
Page 527 MULTIMEDIA Setting Name Selectable Options NOTE: To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and the interior dimmer switch must not be in the party or parade positions. Display Brightness With Headlights OFF NOTE: To make changes to the Display Brightness with Headlights OFF setting, the headlights must be off and the interior dimmer switch must not be in the party or parade positions.
Page 528 526 MULTIMEDIA Setting Name Selectable Options Navigation Turn-By-Turn In Cluster — If Equipped NOTE: When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in the in- strument cluster display as the vehicle approaches a designated turn within a programmed route. Ready To Drive Pop-Up Units After pressing the “Units”...
Page 529 MULTIMEDIA Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length Brief Detailed Show Command List Always With Help Never Clock After pressing the “Clock” button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
Page 530 528 MULTIMEDIA Setting Name Selectable Options Time Format 12hrs 24hrs Show Time in Status Bar — If Equipped Safety & Driving Assistance After pressing the “Safety & Driving Assistance” button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkView Backup Camera Delay —...
Page 531 MULTIMEDIA Setting Name Selectable Options NOTE: The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering wheel position when the option is checked.
Page 532 530 MULTIMEDIA Setting Name Selectable Options Surround View Camera Guidelines NOTE: The “Surround View Rear Back Up Camera Active Guidelines” feature allows you to see active guidelines over the Surround View camera display whenever the gear selector is put into REVERSE or the Surround View button on the touchscreen is pushed.
Page 533 MULTIMEDIA Setting Name Selectable Options NOTE: When the “Blind Spot Alert” feature is selected, the Blind Spot Monitor (BSM) system is activated and will show a visual alert in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert when the turn signal is on.
Page 534 532 MULTIMEDIA Lights After pressing the “Lights” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Off Delay 0 sec 30 sec 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the vehicle is shut off.
Page 535 MULTIMEDIA Setting Name Selectable Options Auto Dim High Beams— If Equipped NOTE: When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati- cally under certain conditions. Daytime Running Lights Flash Lights With Lock Doors & Locks After pressing the “Doors &...
Page 536 534 MULTIMEDIA Setting Name Selectable Options Personal Settings Linked to Key Fob — If Equipped NOTE: The “Personal Seetings Linked to Key Fob” feature provides automatic recall of all settings stored to a memory loca- tion (driver’s seat, exterior mirrors, steering column position and radio station pre-sets) to enhance driver mobility when entering and exiting the vehicle.
Page 537 MULTIMEDIA Setting Name Selectable Options NOTE: When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans- mission is in the PARK or NEUTRAL position and the driver’s door is opened. Flash Lights With Lock Sound Horn With Lock —...
Page 538 536 MULTIMEDIA Auto Comfort Systems — If Equipped After pressing the “Auto-On Comfort” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated/ Remote Start All Starts Ventilated Seat & Steering Wheel With Vehicle Start —...
Page 539 MULTIMEDIA Vehicle Off Options After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Vehicle Off Power 0 sec 45 sec 5 min 10 min Delay — If Equipped NOTE: When the “Vehicle Off Power Delay”...
Page 540 538 MULTIMEDIA Audio After pressing the “Audio” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Balance/Fade Speaker Icon NOTE: When in this display you may adjust the “Balance/Fade” of the audio by pressing and dragging the “Speaker Icon” toward any location in the box.
Page 541 MULTIMEDIA Setting Name Selectable Options NOTE: This feature provides the ability to tune the audio level for portable devices connected through the AUX input. Loudness — If Equipped Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Paired Phones...
Page 542 540 MULTIMEDIA SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Channel Skip List of Channels NOTE: SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning.
Page 543 MULTIMEDIA Accessibility — If Equipped After pressing the “Accessibility” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Accessibility NOTE: The “Accessibility” feature announces a function prior to performing the action selected when using DVD/Blu-ray functions, when it is activated.
Page 544 542 MULTIMEDIA Setting Name Selectable Options Clear Personal Data Cancel NOTE: When the “Clear Personal Data” feature is selected it will remove all personal data including Bluetooth devices and presets. System Information After pressing the “System Information” button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
Page 545: Steering Wheel Audio Controls
MULTIMEDIA STEERING WHEEL AUDIO CONTROLS Pushing the top of the switch will “Seek” up for the next listenable station and pushing the bottom of the switch will The remote sound system controls are located on the rear “Seek” down for the next listenable station. surface of the steering wheel at the three and nine o’clock positions.
Page 546: Aux/Usb/Mp3 Control
544 MULTIMEDIA AUX/USB/MP3 CONTROL There are multiple USB “charge only” ports in this vehicle. • In the center console There are numerous USB ports located throughout the vehicle. This feature allows an external USB device to be • On the back of the front row seats in the Uconnect plugged into the USB port.
Page 547: Uconnect Theater - If Equipped
MULTIMEDIA There are multiple ways to interact with your Uconnect Theater system. • Play your favorite CDs, DVDs or Blu-ray Discs • Plug and play a variety of standard video games or devices into the HDMI port • Listen to audio over the wireless headphones •...
Page 548: Getting Started
546 MULTIMEDIA • The Remote Control Getting Started • The Uconnect Radio • The Individual Uconnect Theater Touchscreens Accessing The System From The Uconnect Radio Uconnect Theater Screen 1 — Uconnect Theater Touchscreen (Rear Touchscreens) 2 — Uconnect Radio (Front Touchscreen) 3 —...
Page 549: Uconnect Theater Controls
MULTIMEDIA You can access your Uconnect Theater system from the Uconnect Theater Controls radio touchscreen following the steps below: Option 1 1. Press the “Media” button. 2. Press the “Uconnect Theater” button icon. Option 2 1. Press the “Apps” button on the touchscreen. 2.
Page 550: Accessing The System From The Uconnect Theater Rear Screens
548 MULTIMEDIA Parents can control certain features of the system with the “Uconnect Theater Controls” screens, right from the Uconnect touchscreen radio. Options include: • Change media sources or select APPS • Lock one or both screens • Mute an individual screen or both screens •...
Page 551: Pairing The Remote
MULTIMEDIA 2. If “YES” is selected to Pair a Remote, press any button Pairing The Remote on the remote and pairing will immediately start. 3. If “NO” is selected, the Uconnect Theater home screen will pop up. NOTE: • There will be a touchscreen notification message when pairing is successful.
Page 552: Unpairing The Remote
550 MULTIMEDIA 3. Press the “Remote” button towards the bottom of the Unpairing The Remote Uconnect Theater touchscreen, within the settings In events such as updating the Uconnect Theater software, menu. or taking a remote to another vehicle, the remote will need to be unpaired from your Uconnect Theater system.
Page 553: Media Sources
MULTIMEDIA Media Sources Users can select content for each screen from the front radio touchscreen by choosing desired content from the “Select Input” drop down menu. Options include Blu-Ray Disc, HDMI, USB, Apps, and Viewing the other rear screen. NOTE: Use the “View Screen” function to pull content from one screen to the other in a single press of a button.
Page 554: Uconnect Theater Remote Control
552 MULTIMEDIA Uconnect Theater Remote Control 5. Fast Forward Button — Push and hold to fast forward through the current audio track or video chapter. Push once to skip to the next track. 6. Play/Pause Button — Begin/resume or pause disc play.
Page 555: Uconnect Theater Home Screen And Controls
MULTIMEDIA Replacing The Remote Control Batteries Uconnect Theater Home Screen And Controls Each remote control requires two AAA batteries for opera- tion. To replace the batteries: 1. Locate the battery compartment on the back of the remote, then slide the battery cover downward. 2.
Page 556 554 MULTIMEDIA General Settings To change source card order, select “Source Card Reorder”, then press and hold source card on the touchscreen, and drag and drop in desired order. You can also adjust settings such as: • Brightness • Media port lighting on and off •...
Page 557: General Information
MULTIMEDIA General Information 2. Press the “Uconnect Theater” button on the radio touch- screen. The following regulatory statement applies to all Radio Refer to “Accessing The System From The Uconnect Ra- Frequency (RF) devices equipped in this vehicle: dio” in this section for further information. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Page 558 556 MULTIMEDIA DVD Blu-ray Disc Player 1 — Disc Player (Rear) 2 — Rear Video USB Port Source Controls From The Uconnect Radio — Uconnect Theater...
Page 559 MULTIMEDIA 2. Mute Mute rear headphones for selected source for the current ignition cycle. Pressing mute again will unmute rear head- phones. 3. Lock Press to enable/disable Remote Control functions and Rear Touchscreen Controls for the selected source. 4. View Select this button to view full screen video if vehicle is not moving.
Page 560: Disc Menu
558 MULTIMEDIA Disc Menu When listening to a CD Audio disc, CD Data disc, DVD or Blu-ray, pushing the remote control’s arrow buttons will navigate the cursor on the rear touchscreen in the desired direction, on whichever touchscreen is selected. The UP, DOWN, LEFT, and RIGHT arrow buttons, and the OK and MENU buttons on the remote, along with the correspond- ing buttons overlaid on the radio touchscreen, can be used...
Page 561: Uconnect Theater Apps
MULTIMEDIA Uconnect Theater Apps Sudoku App Home Screen Apps Home Screen...
Page 562 560 MULTIMEDIA Select the Apps source card to play pre-loaded games. Are We There Yet? — Uconnect 4C NAV Pressing the “Help” button teaches users how to play each game. Pick from games: • Back Seat Bingo • Checkers • Hanging Fruit •...
Page 563: Using The Rear Video Usb Port
MULTIMEDIA their frequency can be set up for route information by NOTE: To view USB media on the rear theater screens, using the arrow buttons, and can be turned on and off insert a USB drive into the port next to the DVD/Blu-ray using the “Notifications”...
Page 564: Play Video Games
562 MULTIMEDIA Play Video Games Headphones Operation Connect the video game console to the HDMI 1 or 2 ports, The headphones receive two separate channels of audio located behind the first row seat. using an infrared transmitter from the video screens. If no audio is heard after increasing the volume control there are a number of things that can be done to trouble- shoot the issue:...
Page 565 MULTIMEDIA Changing The Audio Mode For Headphones 1. Ensure the remote control and the headphones are on the same channel. 2. Push the Home button on the remote control. 3. When the Home menu appears on the touchscreen, use the arrow buttons on the remote control to navigate to the available modes and push the OK button to select the new mode or use the Gesture Pad at the top of the remote control.
Page 566 564 MULTIMEDIA Replacing The Headphone Batteries What Does This Warranty Cover? Except as specified below, this warranty covers any Product that in normal use Each set of headphones requires two AAA batteries for is defective in workmanship or materials. operation. What Does This Warranty Not Cover? This warranty does To replace the batteries: not cover any damage or defect that results from misuse,...
Page 567: Display Settings
MULTIMEDIA Delphi Automotive reserves the right to replace any dis- Listening To Audio With The Screen Closed continued Product with a comparable model. THIS WAR- To listen to only audio portion of the channel with the RANTY IS THE SOLE WARRANTY FOR THIS PRODUCT, screen closed: SETS FORTH YOUR EXCLUSIVE REMEDY REGARDING •...
Page 568: Rear Climate Controls
566 MULTIMEDIA Rear Climate Controls The rear climate controls can also be controlled using the Uconnect Theater system. Refer to “Climate Controls” in “Getting To Know Your Vehicle” for further information. Rear Climate Controls Icon Description ON Button Press and release this button to turn the Rear Climate. Climate Control OFF Button Press and release this button to turn the Climate Controls off.
Page 569 MULTIMEDIA Icon Description Rear Passenger Temperature Up and Down Buttons Provides the rear passengers with independent temperature control. Push the button on the touchscreen to increase or decrease the temperature. The temperature will get warmer as you move up toward the red arrow and colder as you move down toward the blue arrow.
Page 570: Accessibility - If Equipped
568 MULTIMEDIA Icon Description Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. Choose the Wireless Streaming Source Card on your rear Accessibility —...
Page 571 MULTIMEDIA The first row passengers can also access wireless streaming NOTE: Refer to your device’s user manual or www.ucon- by choosing the source in the Uconnect Theater menu on nectphone.com for further information. the front Uconnect touchscreen. 3. Select the Pacifica Wireless Network from the list of available networks on your device 4.
Page 572 570 MULTIMEDIA Your phone will be added as an additional source card on the Uconnect Theater touchscreens. NOTE: The Authentication Screen will appear on both rear touchscreens. The touchscreen screen on which “Accept” is selected will be the primary controller for the wireless streaming session.
Page 573: Bd And Dvd Region Codes
MULTIMEDIA • For multi-session CDs that contain only multiple CD- BD And DVD Region Codes Audio sessions, the player will renumber the tracks so Many BD and DVD discs are coded by geographic region. each track number is unique. These region codes must match in order for the disc to play. •...
Page 574 572 MULTIMEDIA • If you are creating your own files, the recommended Compressed Audio Files (MP3, WMA and AAC) fixed bit rate for MP3 files is between 32 and 320Kbps The Blu-ray Disc player is capable of playing MP3 and the recommended fixed bit rate for WMA files is (MPEG-1 Audio Layer 3), WMA (Windows Media Audio) between 16 and 192Kbps.
Page 575: Product Agreement
MULTIMEDIA • The software which has the copyrights of a third party the disc is reached, the Blu-ray Disc player will return to the beginning of the disc and attempt to play the start of and is distributed as free software. the first track.
Page 576 574 MULTIMEDIA boot_loader sh-ipl +g kernel 2.6.16.29 FreeType 2 2.2.1 gcc sh4eb 3.4.5 glibc 2.3.5 1.00 libgcc_s-3.4.5 bash-3.0-31 busybox 1.00 MAKE DEV 1.1.0 module-init-tools 3.1.0 libtermcap 2.0.8 mtd-utils 20050619 initscripts 8.11.1-1 libstdc+ +3.4.5-10 libiconv 1.11 binutils-sh4eb coreutils 6.9 dosfstools 2.10-3 directfb 1.0.0-rc1 kxml 1.21 2.16.91.0.2...
Page 577 MULTIMEDIA MPEG Cinavia THIS PRODUCT IS LICENSED UNDER THE AVC PAT- Cinavia Notice This product uses Cinavia technology to ENT PORTFOLIO LICENSE FOR THE PERSONAL AND limit the use of unauthorized copies of some commercially- NON-COMMERCIAL USE OF A CONSUMER TO (i) EN- produced film and videos and their soundtracks.
Page 578: General Information
576 MULTIMEDIA FCC/IC Regulatory Notices CAUTION! Modification Statement Use of controls or adjustments or performance of Any changes or modifications not expressly approved by procedures other than those specified herein may re- the party responsible for compliance could void the user’s sult in hazardous radiation exposure.
Page 579: Radio Operation And Mobile Phones
MULTIMEDIA FCC Class B digital device notice CAN ICES-3 (B) / NMB-3 (B) This equipment has been tested and found to comply with This Class B digital apparatus complies with Canadian the limits for a Class B digital device, pursuant to part 15 of ICES-003.
Page 580 578 MULTIMEDIA The internal wireless radio operates within guidelines NOTE: Changes or modifications not expressly approved found in radio frequency safety standards and recommen- by the party responsible for compliance could void the dations, which reflect the consensus of the scientific com- user’s authority to operate the equipment.
Page 581: Voice Commands
MULTIMEDIA VOICE COMMANDS NOTE: If you see the NAV icon on the bottom bar, or in the Apps menus, of your touchscreen, you have the Uconnect Introducing Uconnect 4C NAV system. If not, you have a Uconnect 4C system. Start using Uconnect Voice Recognition with these helpful Get Started quick tips.
Page 582: Basic Voice Commands
580 MULTIMEDIA 5. You can interrupt the help message or system prompts Basic Voice Commands by pushing the VR or Phone button and saying a Voice The basic Voice Commands below can be given at any Command from current category. point while using your Uconnect system.
Page 583: Radio
MULTIMEDIA TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button and say “Help.” The system will provide you with a list of commands. Uconnect 4C/4C NAV Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear.
Page 584: Media
582 MULTIMEDIA Media Uconnect offers connections via USB, Bluetooth and auxil- iary ports (If Equipped). Voice operation is only available for connected USB and AUX devices. (Remote CD player optional and not available on all vehicles.) Push the VR button .
Page 585: Phone
MULTIMEDIA Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illuminated on your touchscreen, your system ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions. Push the Phone button . After the beep, say one of the following commands •...
Page 586: Navigation (4C Nav)
584 MULTIMEDIA Push the VR button . After the beep, say one of the following commands: • Set driver temperature to 70 degrees • Set passenger temperature to 70 degrees TIP: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle.
Page 587: Siriusxm Guardian (4C Nav) - If Equipped
MULTIMEDIA 1. To enter a destination, push the VR button . After the SiriusXM Guardian (4C NAV) — If Equipped beep, say: “Find address 800 Chrysler Drive Auburn Hills, Michigan.” CAUTION! 2. Then follow the system prompts. Some SiriusXM Guardian services, including SOS Call...
Page 588: Register (4C Nav)
586 MULTIMEDIA SOS Call Register (4C NAV) Theft Alarm Notification To unlock the full potential of SiriusXM Guardian in your vehicle, you must activate your SiriusXM Guardian ser- Remote Door Lock/Unlock vices. Send & Go 1. Press the Apps icon on the bottom of your in-vehicle Vehicle Finder touchscreen.
Page 589: Mobile App (4C Nav)
MULTIMEDIA • Press the Remote button on the navigation bar at the Mobile App (4C NAV) bottom of the app to Lock/Unlock, Remote Start, and You’re only a few steps away from using remote com- activate your horn and lights remotely. mands and playing your favorite music in your car.
Page 590: Apple Carplay - If Equipped
588 MULTIMEDIA Push the VR button . After the beep, say one of the Apple CarPlay — If Equipped following commands: Apple CarPlay allows you to use your voice to interact • Show fuel prices with Siri through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your •...
Page 591: Android Auto - If Equipped
MULTIMEDIA Android Auto — If Equipped Android Auto allows you to use your voice to interact with Android’s best-in-class speech technology through your vehicle’s voice recognition system, and use your smart- phone’s data plan to project your Android powered smart- phone and a number of its apps onto your Uconnect touchscreen.
Page 592: General Information
590 MULTIMEDIA This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, in- cluding interference that may cause undesired opera- tion.
Page 593: Cd/Dvd Disc Maintenance
MULTIMEDIA SiriusXM Guardian services support: NOTE: If you experience difficulty in playing a particular disc, it may be damaged, (e.g., scratched, reflective coating • U.S. residents call:1-844-796-4827 removed, a hair, moisture or dew on the disc) oversized, or • Canadian residents call:1-877-324-9091 have protection encoding.
Page 595 CUSTOMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ......594 Impaired (TDD/TTY) .
Page 596: Suggestions For Obtaining Service For Your Vehicle
594 CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally interested in your satisfaction. We want you to be happy Prepare For The Appointment with our products and services. If you are having warranty work done, be sure to have the right papers with you.
Page 597: Fca Us Llc Customer Center
Outside Mexico City: 1-800-505-1300 • Vehicle delivery date and mileage Puerto Rico And U.S. Virgin Islands FCA US LLC Customer Center Customer Service Chrysler International Services LLC P.O. Box 21–8004 P.O. Box 191857 Auburn Hills, MI 48321–8004 San Juan 00919-1857 Phone: (800) 247-9753 Tel.: (787) 782-5757...
Page 598: Service Contract
596 CUSTOMER ASSISTANCE to a TDD or a conventional teletypewriter (TTY) in the responsible for any service contract other than the manu- United States, can communicate with the manufacturer by facturer’s service contract. If you purchased a service dialing 1-800-380-CHRY. contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New Vehicle Canadian residents with hearing difficulties that require...
Page 599: Warranty Information
CUSTOMER ASSISTANCE 597 If NHTSA receives similar complaints, it may open an WARNING! (Continued) investigation, and if it finds that a safety defect exists in California to cause cancer and birth defects, or other a group of vehicles, it may order a recall and remedy reproductive harm.
Page 600: Publication Order Forms
598 CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Owner’s Manuals To order the following manuals, you may use either the These Owner’s Manuals have been prepared with the website or the phone numbers listed below. Visa, Master- assistance of service and engineering specialists to acquaint card, American Express, and Discover orders are accepted.
Page 601 INDEX...
Page 602 600 INDEX About Your Brakes ......504 Air Conditioning, Operating Tips ....120 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 603 INDEX 601 Fluid Type ......513 Parking .......287 Special Additives .
Page 604 602 INDEX Chart, Tire Sizing......474 Connector Check Engine Light (Malfunction Indicator Light)..185 UCI .
Page 605 INDEX 603 Dimmer Switch, Headlight.....95 Electronic Throttle Control Warning Light ..175 Dipsticks Emergency, In Case Of Oil (Engine) .
Page 606 604 INDEX Engine Oil Viscosity Chart ....450 Folding Rear Seat ......68 Enhanced Accident Response Feature .
Page 607 INDEX 605 GVWR ........380 Hook, Coat .......146 Hazard Inside Rearview Mirror .
Page 608 606 INDEX Keyless Enter-N-Go Center Mounted Stop ..... .400 Lock The Vehicle’s Doors ....533 Cruise .
Page 609 INDEX 607 Side Marker ......397, 398 Master Cylinder (Brakes) .....469 SmartBeams .
Page 610 608 INDEX Checking ......447 Pets ........275 Disposal .
Page 611 INDEX 609 Rear Air Conditioning ..... . .117 Remote Starting System ..... . .49 Rear Camera .
Page 612 610 INDEX Seat Belt Extender ......226 Reclining .......70 Seat Belt Pretensioner .
Page 613 INDEX 611 Oil ........511 System, Remote Starting ..... .49 Speed Control Accel/Decel .
Page 614 612 INDEX Replacement ......487 Transmitter, Garage Door Opener (HomeLink) ..136 Rotation .
Page 615 INDEX 613 Vehicle Storage ......120 Viscosity, Engine Oil ......450 Voice Recognition System (VR) .
Page 616 INSTALLATION OF RADIO TRANSMITTING The antenna cable should be as short as practical and EQUIPMENT routed away from the vehicle wiring when possible. Use Special design considerations are incorporated into this only fully shielded coaxial cable. vehicle’s electronic system to provide immunity to radio Carefully match the antenna and cable to the radio to frequency signals.

Chrysler Pacifica Hybrid 2018 Owner's Manual

Introduction

Graphical

Getting to Know Your Vehicle

Getting to Know Your Instrument Panel

Safety

Starting and Operating

Starting and Operating 305

374 Starting and Operating

In Case of Emergency

Servicing and Maintenance

Quick Links

Chapters

Related Manuals for Chrysler Pacifica Hybrid 2018

Summary of Contents for Chrysler Pacifica Hybrid 2018