Front Exhaust Pipe - Subaru Legacy 2003 Service Manual

Hide thumbs Also See for Legacy 2003:

Table of Contents

2. Front Exhaust Pipe

1) Disconnect battery ground cable.

2) Disconnect front oxygen (A/F) sensor connector.

3) Disconnect rear oxygen sensor connector.

4) Lift-up the vehicle.

5) Separate front and center exhaust pipe assem-

bly from rear exhaust pipe.

Be careful, exhaust pipe is hot.

FRONT EXHAUST PIPE

6) Remove under cover.<Ref. to EI-13, REMOVAL,

Front Under Cover.>

7) Remove nuts which hold front exhaust pipe onto

cylinder heads.

Be careful not to pull down front and center ex-

haust pipe assembly.

8) Remove bolt which installs front and center ex-

haust pipe assembly to hanger bracket.

9) Remove front and center exhaust pipe assembly

from the vehicle.

• Be careful not to let front and center exhaust

pipe assembly fall off when removing as it is

quite heavy.

• After removing front and center exhaust as-

sembly, do not apply excessive pulling force on

rear exhaust pipe.

10) Separate front exhaust pipe from center ex-

Table of Contents