Front Exhaust Pipe - Subaru forester 2001 Service Manual

2. Front Exhaust Pipe

A: REMOVAL
S182065A18
1) Disconnect battery ground cable.
2) Remove front oxygen (A/F) sensor. <Ref. to
FU(DOHC TURBO)-42, REMOVAL, Front Oxygen
(A/F) Sensor.>
3) Remove under cover.
4) Remove lower exhaust manifold cover (RH).
5) Remove lower and upper exhaust manifold
covers (LH).
6) Remove bolts and nuts which hold front
exhaust pipe assembly to turbocharger joint pipe.
7) While holding front exhaust pipe assembly with
one hand, remove nuts which hold front exhaust
pipe assembly to cylinder head exhaust port.
8) Remove front exhaust pipe assembly.
9) Remove covers from exhaust manifold and
front exhaust pipe.
FRONT EXHAUST PIPE
10) Separate front exhaust pipe from exhaust
S182065
mani-folds.
B: INSTALLATION
G6M0095
CAUTION:
Replace gaskets with new ones.
1) Assemble front exhaust pipe and exhaust mani-
folds.
Tightening torque:
G2M0852
2) Install front exhaust pipe covers.
Tightening torque:
3) Install upper exhaust manifold cover (RH).
Tightening torque:
4) Install front exhaust pipe assembly.
Tightening torque:
G2M0853
EX(DOHC TURBO)-7
S182065A11
39 N·m (4 kgf-m, 28.9 ft-lb)
25 N·m (2.5 kgf-m, 18.1 ft-lb)
18.6 N·m (1.9 kgf-m, 13.7 ft-lb)
35 N·m (3.6 kgf-m, 26.0 ft-lb)
Exhaust
G2M0854
G2M0854