Teledyne T3DSO1000 Programming Manual page 99

MEASURE
DESCRIPTION
COMMAND SYNTAX
Digital Oscilloscope Series
MEASURE_DELAY | MEAD
The MEASURE_DELY command places the
instrument in the continuous measurement mode
and starts a type of delay measurement.
The MEASURE_DELY? query returns the
measured value of delay type.
MEASURE_DELAY
sourceB>
<sourceA-sourceB>:={C1-C2,C1-C3,C1-C4,C2-
C3,C2-C4,C3-C4}
<type>:={PHA,FRR,FRF,FFR,FFF,LRR,LRF,L
FR,LFF,SKEW}
Type Description
The phase difference
PHA
between two channels.
(rising edge - rising edge)
Delay between two
FRR
channels.
(first rising edge - first
rising edge)
Delay between two
FRF
channels.
(first rising edge - first
falling edge)
Delay between two channels.
FFR
(first falling edge - first
rising edge)
Delay between two channels.
FFF
(first falling edge - first
falling edge)
LRR
Delay
channels.
(first rising edge - last rising
edge)
LRF Delay
Command/Query
<type>,<sourceA-
between two
between two
99