Teledyne T3DSO1000 Programming Manual page 119

PASS/FAIL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
PF_OPERATION | PFOP
The PF_OPERATION command controls to run
or stop Pass/Fail test.
The PF_OPERATION?
operation state of Pass/Fail test.
PF_OPERATION <state>
<state>:={ON,OFF}
PF_OPERATION?
PF_OPERATION <state>
The following command controls to run
Pass/Fail test.
Command message:
PFOP ON
PFEN
Valid?
no
yes
Command/Query
query returns the
119